2Dig Plain comparisons of crane signalling and jobsite communication tools

How to coordinate aircraft lifts with the crane operator

For aircraft recovery crews coordinating lifts with the crane operator: what to have ready, the order of moves, tool options and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before the lift, the crew needs one signal person who gives the crane operator each move, and everyone agrees on the words used for those moves. Button presses, chat and voice pass between phones in a browser. [1]

Name one person to start the jobsite session and to share its link or QR code with the rest of the crew. [1] Use a link from the current shift only, because a jobsite link stops working 12 hours after the first person joins it. [1]

Agree on what STOP, HOLD and SLOW mean for this lift before anyone touches the aircraft. [1] On Android browsers signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [1] Decide before the lift who holds the phone for the crane operator and where that phone sits, so the crane operator can see the signal person's moves.

Step by step

  1. Have the crew lead open the session from a phone browser. No app install is needed. [1]
  2. Share the link or QR code with each crew member, and have each one join from it. [1]
  3. Before the lift, confirm each phone has a browser open to the session. [1]
  4. Confirm every member has joined and can see the signals before the lift starts. [1]
  5. Run a short check with no load on the hook, so the crew can see each signal arrive on every phone.
  6. Walk the lift through in plain terms: who gives each move, which signal stops it, and who checks the load at each stage. HOLD and SLOW stay on for everyone until the last person leaves the jobsite, so the crew clears them on purpose. [1]
  7. Holding a move button keeps that move going to the other phones. If the move stops arriving for 2 seconds, the other phones drop it, so the signal person keeps watching the aircraft while the button is held. [1]
  8. For routine words, use the one-tap calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [1]
  9. If the crew needs to talk through a difficult part of the lift, anyone who has joined can take part in a voice call from the phone browser. [1]
  10. When anyone sees a problem, press STOP. It releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew pauses until it agrees to continue. [1]
  11. At the end of the lift, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] It runs in a phone browser with no app install. [1] The app can be added to a phone's home screen as a standalone app. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]

Details for a phone video call app are not published here, so check whether the crew can keep the call open for the whole lift, whether the signal person stays in view of the crane operator, and whether the phone locks its screen mid-lift.

Details for a two-way radio are not published here, so check that every crew member can be heard over the site's noise, that the crew agrees on plain words, and that the channel stays clear through the lift.

Match the option to the crew and the site. A phone-based option depends on each phone's data signal, so keep a second method ready.

Common mistakes to avoid

Relying on one phone for STOP. The signals, chat messages and voice calls reach each phone through its browser, so check that every crew member is in the session. [1]

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1]

Reusing an old link for a new shift. A link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]

Forgetting that HOLD and SLOW stay on until the last person leaves, so a HOLD set earlier in the shift still shows. [1]

Expecting a move to keep going after the button is let go. If a move stops arriving for 2 seconds, the other phones drop it. [1]

Letting a phone sleep mid-lift. Check each phone's sleep and screen settings before the lift starts.

Skipping the check that every crew member has joined. Confirm the whole crew is in the session before the first move.

Frequently asked questions

Is OperatorLink free to use for aircraft recovery crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install. [1] Button presses, chat and voice pass between phones in a browser. [1] Check each crew member's data plan before the shift starts.

What happens in OperatorLink when someone presses STOP?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1]

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] Because a jobsite link stops working 12 hours after the first person joins it, share a current link or QR code with the crew for each shift. [1] [1]

Does OperatorLink make every phone buzz when a STOP is sent?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the full-screen alert is the signal to watch for. [1] [1] Check the sound and screen settings on every phone in the crew before the lift starts, so no one misses a STOP.

Can OperatorLink handle voice calls and quick calls during a lift?

Anyone who joins the session can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice passes between phones in a browser. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons