How to confirm stop and slow signals reach the operator clearly
Steps for curtain wall project managers to confirm stop and slow signals reach the crane operator clearly, with tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To confirm stop and slow signals reach the operator clearly, agree who sends each signal, test STOP, SLOW and HOLD with the whole crew before the lift, and have the operator read each one back. OperatorLink is one option, and it shows STOP, HOLD and SLOW to the crew and passes them between phones in a phone browser. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
| Hand signals from a signal person | not published | not published | not published |
What you need before you start
Before the lift, the curtain wall project manager needs a named person who sends STOP, HOLD and SLOW, and a named operator who receives them. Write down which words mean which action, so the crew uses the same words on every shift. Choose a second way to carry each signal, such as a hand signal from a signal person or a radio, so that one channel is not the only one. Make sure every phone or radio has a working signal and enough charge for the full shift. If the crew uses OperatorLink, the person who starts the session shares a link or QR code, and the crew joins from it. [1] No app install is needed, because it runs in a phone browser. [1]
Step by step
- Agree who sends each signal and who must receive it.
- Confirm the operator can see or hear each signal from where they sit during the lift.
- Gather the whole crew before the lift and confirm each person is ready.
- Send a test STOP and confirm every person saw or heard it.
- Send a test SLOW and HOLD, and have the operator read each one back in plain words.
- Check that each device alerts the way you expect, since some phones buzz and others do not, and use the screen or voice where needed.
- Keep the channel clear of other talk during the test, so the signal is not lost in chatter.
- Repeat the check at the start of each shift and after any break, and confirm nothing from an earlier shift is still showing before work resumes.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else, while HOLD and SLOW stay on for everyone until the last person leaves. [1] [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1]
A phone video call app is another option. No facts are available for it here, so check whether the call can stay open for the whole shift, whether the operator can see the signal person's hands, and whether the phone keeps its screen on during the lift.
A two-way radio is a third option. No facts are available for it here, so check that the operator can hear each signal over site noise, that the channel stays clear, and that the crew agrees on the same words before work starts.
A signal person using hand signals is a fourth option. No facts are available for it here, so check that the operator has a clear line of sight to the signal person at every point of the lift.
Match the option to the site and the crew, and keep a fallback ready for any option you choose.
Common mistakes to avoid
Relying on one channel for STOP. If that channel fails, the operator may not get the signal, so keep a voice or hand option ready as well.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every device. [1]
Leaving a session empty and expecting it to be there later. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Reusing an old link. A jobsite link stops working 12 hours after the first person joins it, so share a fresh link for each shift. [1]
Forgetting that HOLD or SLOW stays on until the last person leaves the jobsite, so check the screen before work resumes. [1]
Trusting a move that has stopped arriving. If a press stops arriving for 2 seconds, the other phones drop it, so keep watching the operator's own screen. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install. [1] Check the phone's data plan before the shift, since button presses and voice pass between phones in a browser. [1]
What does STOP do on OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the jobsite. [1] Test STOP with the whole crew present before the lift, so each person knows what the alert looks like on their own phone.
Does OperatorLink buzz every phone when STOP is sent?
No, not every phone buzzes. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] An iPhone user therefore needs to watch the screen for the full-screen alert, which STOP shows to everyone else. [1] Set up the test so each person confirms what they see or hear, and keep a second signal ready for any phone that does not buzz.
How long does an OperatorLink link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new shift, have the person who starts the jobsite share a fresh link or QR code with the crew, so nobody joins from an old one.
Can OperatorLink carry voice between crew members?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages instead. [1] Voice runs through the same phone browser, so keep a radio or hand signal as a fallback in case a call cannot connect during the lift.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift