2Dig Plain comparisons of crane signalling and jobsite communication tools

How to confirm load movements with the rigger

Learn how overhead crane operators can confirm load movements with the rigger, prepare for each lift, compare communication options and avoid common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Confirming a load movement with the rigger means agreeing on the intended move and getting a clear reply before the load travels. One way to do that is a jobsite session in a phone browser, where the crew joins from a shared link or QR code. [1] [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

An overhead crane operator and the rigger can confirm a movement by agreeing on the intended direction and waiting for a clear reply before the load travels. OperatorLink passes button presses, chat and voice between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] Before relying on any communication method, check that the operator and rigger can both use it during the lift and agree on what each signal or spoken reply means.

Agree in words what each signal means before the first pick, so neither of you has to work it out from the load. With OperatorLink, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] If everyone leaves and the session sits empty, it is wiped after 3 idle hours, so a session left over from a stopped shift may need starting fresh. [1] Add the page to the phone's home screen to open it as a standalone app. [1]

Step by step

  1. Agree the plan in words with the rigger before the lift: which direction, how far, and what each of you does if the load has to stop. If using OperatorLink, confirm that the phones can open a browser, since button presses, chat and voice pass between phones in a browser. [1]
  2. Decide who calls each movement and who says it back, and keep those roles for the whole shift so a reply always means the same thing.
  3. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  4. That person shares the link or QR code with the crew, and each member joins from it. [1]
  5. Confirm the intended crew members have joined the session before the lift begins. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [1]
  6. Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  7. Call the move, then wait for the rigger's reply before the load travels. On the phones, holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it, so keep the button held while watching the load. [1]
  8. Press STOP if the load or the rigger is not where the plan says it should be: STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
  9. Use one-tap radio-style calls such as Go Ahead, Copy That and All Clear when a short word is enough, because these are sent as chat messages. [1]
  10. At the end of the shift, leave the session together, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]
  11. Note what was agreed and what changed before the next pick, so the next movement starts with the same understanding on both sides.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the rigger's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and check how the chosen method will be used during the lift. Keep an agreed alternative available if the chosen method cannot be used.

Common mistakes to avoid

Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, when they are cleared. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1] Assuming that adding the page to the home screen prevents the phone from sleeping: it adds the page as a standalone app. [1] Counting a quick reply as a confirmed move when the rigger has not looked at the load yet.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser, with no app install needed. [1] Before the shift, check that the phone can open the browser and that the crew understands how to use the chosen signals and voice or chat messages.

What happens when the STOP button is pressed?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Look at the load and the rigger before moving again.

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, starting a new session and sharing its link or QR code with the crew is a practical way to give the crew a current way to join.

Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone the crew carries before the lift, so the operator and the rigger both notice a signal.

Can the rigger and the operator talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Agree on an alternative communication method with the crew in case the voice call cannot be used.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons