2Dig Plain comparisons of crane signalling and jobsite communication tools

How to confirm every crew can hear signals on a crane site

Steps for crane site superintendents to confirm every crew member can hear and see STOP, HOLD and SLOW signals, with tool options and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Confirm every crew member can hear and see each signal by checking that everyone who needs the signal has joined the session and that each phone shows the alert. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1]. OperatorLink is currently free to use, and no paid plan is built yet [1]. The fees for the phone video call app and the two-way radio are not published, so check their fees before choosing.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Crane site superintendents need a clear list of who gives signals, who receives them, and what backup applies if one channel fails. Check that each crew member has a phone or radio that works for the shift. Check each phone's volume, ringer and vibration settings.

If the crew uses a phone browser tool, the phones need a working data signal, because signals pass between phones in a browser [1]. Android browsers make the phone buzz on signals such as STOP, while iPhone Safari ignores the buzz, so iPhone users depend on the screen and sound [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. Keep a spare radio or hand signal ready in case a phone fails.

Step by step

  1. Walk the site with the crew before the shift and name the signal person, the operator, and anyone who can call a stop.
  2. Have every crew member check phone volume, vibration and screen brightness, so an alert can be seen and heard.
  3. Send one harmless test signal and ask each person to confirm receipt out loud or by reply. Note anyone who did not confirm and fix the problem before the lift.
  4. If the crew uses OperatorLink, the person who starts the jobsite opens it from a phone browser, with no app install needed [1].
  5. That person shares the link or QR code, and each crew member joins from it [1].
  6. Confirm every crew member has joined before the lift starts, because the signals are shown to the jobsite crew [1].
  7. Agree which signals stay on until cleared. In OperatorLink, HOLD and SLOW stay on for everyone until the last person leaves [1].
  8. Test the quick calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages [1].
  9. Check that a move keeps arriving during the test. If a move stops arriving for 2 seconds, the other phones drop it [1].
  10. Agree that anyone who sees a hazard may press STOP. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1].
  11. After the shift, have everyone leave the session. A jobsite with nobody in it is wiped after 3 idle hours [1].

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [1]. Nobody needs to install an app, since it runs in the browser [1]. Anyone who joins can take part in a voice call [1]. A jobsite link stops working 12 hours after the first person joins it [1], so start a fresh session for each new shift. The phones still need a data signal, so check the signal at the site before the shift.

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person stays in view, and whether the phone locks its screen during a lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice calls, that each member can hear the channel over machine noise, and that the channel stays clear for the whole lift.

Button presses, chat and voice pass between phones in a browser. [1]

Common mistakes to avoid

Relying on one phone for STOP. Check what happens if a phone loses its data signal during the shift. Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check sound and screen on each device [1]. Leaving an empty session and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours [1]. Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew must clear them on purpose [1]. Not checking that a move still arrives. If a held move stops arriving for 2 seconds, the other phones drop it [1]. Letting the phone sleep mid-lift. The app can be added to a phone's home screen as a standalone app [1].

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [1]. It runs in a phone browser, so no app install is needed [1]. The phones still need a working data signal for the whole shift [1]. Before relying on it on a site, check the phone's data signal at the jobsite.

What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it [1]. Check who on the crew is expected to press STOP.

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. For a new shift, start a new session and share the new link or QR code with the crew [1]. Check that the link being used is the current one before the shift begins.

Do STOP signals in OperatorLink buzz every phone?

No, not every phone buzzes. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1]. iPhone Safari ignores the buzz. Confirm that each person has tested a signal and knows what the alert looks like on their own device.

Can OperatorLink be used for voice calls on a crane site?

Anyone who joins the jobsite can take part in a voice call run from the phone browser [1]. One-tap quick calls such as Go Ahead, Copy That and All Clear are sent as chat messages [1]. Voice depends on the phone's data signal, so check the signal before the shift. Test the voice call and the quick calls during the signal check, and confirm each member can hear the call over site noise.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons