How to compare communication tool costs for a lift plan
How to compare communication tool costs for a lift plan: what to have ready, the steps to compare, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To compare communication tool costs for a lift plan, the crew joins one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] An idle session is wiped after 3 hours, and iPhone Safari does not buzz on alert. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
To compare communication tool costs for a lift plan, the crew needs a phone with a working browser and a data signal, because the signals travel over the phone network. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1]
Before writing the lift plan, list which signals must reach every crew member, such as STOP, HOLD and SLOW, plus chat and voice. [1] If everyone leaves the session and it sits empty, it is wiped after 3 idle hours, so a session from an earlier shift may need to be started again. [1]
HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] Check each phone's data plan, since signals in a browser keep using the phone network through the shift. [1] The app can be added to a phone's home screen as a standalone app. [1]
Step by step
- List every signal the lift plan must carry, such as STOP, HOLD and SLOW, plus chat and voice, so the options compared cover the same job. [1]
- Check each phone has a working browser, because button presses, chat and voice pass between phones in a browser. [1]
- Confirm the app runs in a phone browser, with no app install. [1]
- That person shares the link or QR code with the crew, and each member joins from it. [1]
- Confirm every crew member is in the session before the lift begins. [1]
- Write down what each option says it costs today: OperatorLink is currently free to use, and no paid plan is built yet. [1]
- Write down what each option publishes about a card fee, and write "not published" where an option publishes none. [1]
- Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
- Pressing a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while checking the load. [1]
- Check whether the lift plan needs talk-back as well as signals: one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
- Note that anyone who joins can take part in a voice call run from the phone browser, so voice counts as part of the tool's cost picture. [1]
- When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
- Note the session end conditions in the lift plan: a jobsite link stops working 12 hours after the first person joins it. [1]
- At the end of the shift, everyone leaves the session, and remember that a jobsite with nobody in it is wiped after 3 idle hours. [1]
- Add the phone and data cost each crew member carries, so the lift plan shows the full cost of the option chosen.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages, and anyone who joins can take part in a voice call run from the phone browser. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.
Match the option to the crew and the site, and keep a fallback ready.
Common mistakes to avoid
Relying on one phone for the STOP signal: no fact here describes what happens when a phone drops off, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1]
Leaving an empty session and expecting it to hold signals the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [1] Not confirming that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [1]
Letting the phone go to sleep mid-lift, and not knowing that the app can be added to the phone's home screen as a standalone app. [1] Comparing tool costs that cover different jobs: write down what each option publishes for its fee and card fee, and mark the parts no option publishes, so the lift plan compares like with like.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals are shown through a phone browser, so the phone still needs a working data signal for the shift. Check each phone's data plan and the coverage on site before relying on the tool in a lift plan.
What happens when the STOP button is pressed?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1] After STOP, pause and look before anyone moves again.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal.
Can crew members talk over the phone during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] Keep a radio or hand signal as a fallback.
How does the crew join a jobsite session?
The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Each phone needs a working browser and a data signal, and no app install is needed because the page runs in the browser. Confirming every member is in the session before the lift starts keeps everyone on the same signals.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift