2Dig Plain comparisons of crane signalling and jobsite communication tools

How crane rigging instructors check trainee signal order

A tool-neutral way for crane rigging instructors to check that trainees send signals in the right order, with one phone option to compare.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Write the signal sequence down before the session, have each trainee send it while the instructor watches from a clear position, and repeat any signal given out of order until it is right. Keep a second check ready for the whole group in case a run cannot be finished as planned.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Start with the signal sequence written down, one line per signal, in the order each trainee must send it. Keep a short sketch of the lift with the load, the trainee's position and the operator's position marked, so the check can be run against a realistic layout. Name who is acting as the signal person and who is acting as the operator for each run, so every trainee knows their role. Pick a spot where the instructor can see the trainee and the load at the same time, and where machine noise will not hide a call. Decide in advance what counts as out of order, such as a signal sent before the one it follows, so the result of each run is clear. Have a blank record sheet ready so each run's results can be written down as they happen. Brief the trainees on the format of the check so nobody is surprised by it. Keep a hand signal or radio check ready as the fallback in case a run cannot be completed as planned.

Step by step

  1. Write the signal sequence on a card, one line per signal, in the order the trainee must send it.
  2. Brief the trainee on the sequence and let them read it once before the check starts.
  3. Have the trainee stand in the position they would use on a real lift, with the instructor and the load in view.
  4. Call out a move or a load, and ask the trainee to send the matching signal.
  5. Note whether each signal arrives in the set order, and mark any that come early, come late or are skipped.
  6. Repeat the call-outs in a different order, so the trainee cannot simply follow memory of the last run.
  7. When a signal is missed, stop the check and go back over that step before continuing.
  8. Give the trainee a plain account of each mistake, naming the signal and the step where it went wrong.
  9. Run the check again at the end of the course, and compare the marks with the first run.

Let the trainee know the check measures order rather than speed, so they do not rush the signals. After the last run, keep the card and the record sheet together so the next instructor can repeat the same check.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] For a check run with a group, the instructor can share a link or QR code, and each trainee joins from it. [1] Nobody needs to install an app, because the page runs in a browser. [1] A held button keeps sending its move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1]

A phone video call app is a second option. No facts here describe one, so check whether the call stays open for the whole session, whether the trainee's hands stay in view, and whether the phone locks its screen during a check.

A two-way radio is a third option. No facts here describe one, so check that every trainee can be heard over machine noise, and that the channel stays clear for the whole check.

Match the option to the classroom and the trainees, and keep a hand signal ready in case a phone connection drops.

Common mistakes to avoid

A common mistake is checking only the first signal and assuming the rest follow in order, since each signal has its own place in the sequence. Another is calling out loads in the same order every run, which lets trainees learn the pattern instead of the signals. Letting the trainee read the card during the check also shows memory of the card rather than the signal itself. Reading a signal sent a moment early as correct because the instructor was looking at the load is easy to do, so mark it on the record sheet at once. Assuming every phone alerts the same way causes trouble too: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check sound and screen on every device. [1] Leaving a session open and expecting it to hold the sequence the next day is another slip, because a jobsite with nobody in it is wiped after 3 idle hours. [1] Finally, relying on a single phone with no hand signal or radio check leaves the group with no fallback when the connection drops.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so trainees do not download anything before joining. [1] Check each phone's data plan before the class starts, since the check depends on the phones staying connected. Keep a hand signal or radio check ready as a fallback for the whole class.

What does the STOP signal do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the alert reaches each trainee at once. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the session. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] The person who starts the session shares a link or QR code, and the group joins from it. [1]

Do STOP signals buzz every phone in OperatorLink?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the trainee has to watch the screen for the alert. [1] Check the sound and screen settings on every phone in the group before the check begins, so no trainee misses a signal, and keep a hand signal ready as a backup.

Can OperatorLink carry voice calls during a crane rigging check?

Anyone who joins can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Trainees who join from the link can use the voice call and the chat during a run. [1] Keep a hand signal or radio check ready as a fallback for the whole class.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons