How to check crane signals reach the operator clearly
Steps for crane inspectors to check that STOP, HOLD and SLOW signals reach the crane operator clearly, with tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Before the lift, have every crew member and the operator confirm they can see each of STOP, HOLD and SLOW, then test each signal in turn. OperatorLink is one option for passing these signals between phones in a browser. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before checking that signals reach the operator clearly, crane inspectors need a plan for who gives each signal, who watches for it, and what the operator should do when it arrives. Write down the signals in use, STOP, HOLD and SLOW, and confirm that everyone on the crew knows what each one means. Walk the site with the signal person and the operator's position in view, and note any spot where the operator cannot see the load or the signal person. Check that each phone or radio the crew will use has a charged battery and a working connection for the whole shift. If phones carry the signals, check that the browser on each phone opens the session, because the signals pass between phones in a browser. [1] The person who starts the session shares a link or QR code, and each crew member joins from it. [1] Finally, agree on who clears HOLD and SLOW, since those signals stay on for everyone in the jobsite until the last person leaves. [1]
Step by step
- Gather the crew and the operator before the test, and confirm each person can name the STOP, HOLD and SLOW signals.
- Have the person who starts the session open it from a phone browser. No app install is needed. [1]
- Share the link or QR code, and confirm every crew member has joined before the test begins. [1]
- Ask the operator to watch the phone screen and confirm each signal can be seen from the operator's position. [1]
- Send one signal at a time, starting with SLOW, then HOLD, and have the operator respond to each before moving to the next.
- Hold a move button and confirm the move keeps arriving on the other phones. If it stops arriving for 2 seconds, the other phones drop it, so treat that gap as a failed check. [1]
- Send STOP last. It releases every held direction on every phone and shows a full-screen alert to everyone else, so confirm each person sees that alert. [1]
- On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so confirm the screen alert on every iPhone. [1]
- Test the one-tap calls Go Ahead, Copy That and All Clear, which are sent as chat messages. [1]
- End the check by having everyone leave the session. HOLD and SLOW are cleared when the last person leaves, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1]
Tools that can do it
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] A jobsite link stops working 12 hours after the first person joins it, so a check that runs on a later shift may need a new link. [1] The page can also be added to a phone's home screen as a standalone app. [1]
A phone video call app is a second option. No facts here describe one, so check whether it keeps the call open for the whole check, whether the operator can see the signal person's hands, and whether the phone locks its screen during the lift.
A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear during the lift.
Match the option to the crew and the site, and keep a fallback ready, since phone connections in a browser depend on each phone's signal.
Common mistakes to avoid
Relying on one phone to carry STOP. If that phone loses its connection, the rest of the crew may not get the signal, so keep a voice or hand signal ready as a backup.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every device. [1]
Leaving an empty session open and expecting it to be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [1]
Not confirming that a move still arrives. A held move button keeps sending the move, and if it stops arriving for 2 seconds, the other phones drop it. [1]
Reusing a link from an earlier shift. A jobsite link stops working 12 hours after the first person joins it. [1]
Letting the phone sleep during the lift. Adding the page to the home screen lets it open as a standalone app, so check the phone's screen settings before the shift starts. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] A check of signals on phones still depends on each phone's connection during the shift, so test that connection before the lift begins. The page runs in a phone browser, so there is no app to install first. [1] It can also be added to a phone's home screen as a standalone app. [1]
What happens when OperatorLink receives a STOP signal?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently. They stay on for everyone until the last person leaves the jobsite. [1] During a check, send STOP last so the rest of the test is not interrupted, and confirm that each phone shows the alert before the check ends.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left empty will not be there later. [1] For a check on a later shift, start a new session and share the new link or QR code with the crew. [1]
Do STOP signals in OperatorLink buzz every phone?
On Android browsers, signals such as STOP make the phone buzz. iPhone Safari ignores the buzz, so on an iPhone the check should confirm the full-screen alert on screen instead. [1] Check the sound and screen settings on every phone before the test begins, and confirm that each crew member sees the alert when STOP is sent. [1]
Can OperatorLink carry voice and radio-style calls during a check?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on each phone's connection, so keep a radio or hand signal ready as a fallback during the check.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift