2Dig Plain comparisons of crane signalling and jobsite communication tools

How to call stop while braces are attached on tilt-up crews

Steps for tilt-up crews to call stop while braces are attached, with a phone browser setup, what to have ready, tool choices and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

A tilt-up crew calls stop while the braces are attached by joining one jobsite session in a phone browser, with someone sharing a link or QR code. [1] [1] STOP shows a full-screen alert to everyone else, while HOLD and SLOW stay on until the last person leaves. [1] [1] A jobsite with nobody in it is wiped after 3 idle hours. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before the braces come off, the tilt-up crew needs a phone with a working browser and a data signal, because button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left over from an earlier shift may need to be started fresh. [1] Decide whose phone is the one that calls stop, and keep that phone in hand through the lift. Agree on who checks the braces and who gives the all-clear before any brace is loosened. Before the first brace comes off, ask each crew member to open the shared jobsite link or QR code, join the session, and confirm they can see the same STOP, HOLD and SLOW signals on their phone. [1] [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]

Step by step

  1. Check that each phone has a working browser and a data signal for the whole shift, because button presses, chat and voice pass between phones in a browser. [1]
  2. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the crew, and each member joins from it. [1]
  4. Before the first brace comes off, check with each crew member individually that they have opened the shared link or QR code, joined the jobsite session, and can see STOP, HOLD and SLOW on their phone. [1] [1]
  5. Agree on which signals stay on. HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
  6. Holding a move button keeps sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it, so keep the button held while checking the load. [1]
  7. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
  8. At the end of the shift, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A one-tap call such as All Clear is sent as a chat message, so the crew can confirm a status without speaking. [1]

A phone video call app is a second option. No facts for this page describe one, so check whether the crew can keep the call open for the whole shift, whether the person calling stop stays in view of the crane, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts for this page describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready, since a browser-based session depends on each phone's data signal.

Common mistakes to avoid

Relying on one phone for the STOP call. If that phone loses its data signal, the rest of the crew needs another way to be warned, so keep a voice or hand option ready. Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving an empty session open and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1] Not confirming that a move still arrives. If a move stops arriving for 2 seconds, the other phones drop it. [1] Letting the phone sleep mid-lift. Adding the page to the home screen as a standalone app gives the crew a quicker way to open it. [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the phone still needs a working data signal for the whole shift. [1] Check the phone's data plan before relying on it.

What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [1]

How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew. [1]

Do STOP signals buzz on every phone during a braced tilt-up lift?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the lift so nobody misses the signal.

Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on the phone's data signal, so keep a radio or hand signal as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons