2Dig Plain comparisons of crane signalling and jobsite communication tools

How to call stop when people enter the swing area for film and studio crane crews

Call stop when people enter a film or studio crane swing area. The steps, what to have ready, tool options and common mistakes for the crew.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Call stop the moment anyone walks into the swing area, using one agreed call that the whole crew knows. Name who may make the call, mark the boundary, and keep a backup way to pass the call before the lift starts.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes taps, chat and spoken calls between phones in a browser [1]The product is currently free to use, and no paid plan is built yet, so the page publishes no fee for a paid plan [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Film and studio crane crews work around actors, extras, camera operators and other crew who may stand within reach of the load's path. Before the lift starts, agree who may call stop, and make sure everyone on set knows what the call sounds or looks like. Name one person as the signal lead, and confirm that person can see the load and the swing area from where they stand.

Walk the swing area with the crew and mark the boundary clearly, so people know where the load can reach. Brief visiting crew, talent and visitors on the stop call and on where they should stand. Check that every radio or phone in use is charged and has signal before the shift starts.

Decide what happens after a stop. Nobody moves into the swing area until the signal lead says it is clear. Keep a backup way to pass the call, such as a hand signal or a second voice, in case one channel fails.

Step by step

Follow these steps for every lift, so the stop call works the same way each time.

  1. Agree the stop call in the pre-lift briefing, and make sure the whole crew hears the exact words.
  2. Name the one person who may call stop, and name who backs them up if they cannot see the load.
  3. Mark the swing area boundary with visible tape or cones, and keep cast, extras, camera crew and visitors outside it while the crane moves.
  4. Before each move, check that the swing area is clear and say so aloud or over the channel.
  5. When anyone enters the swing area, the signal lead calls stop straight away, using the same words every time.
  6. Everyone who hears the stop call stops moving their load or their feet and holds still until the lead says the area is clear.
  7. Do not restart the lift until the lead has checked the area and confirmed it is clear to everyone.
  8. Log each stop call in the shift notes with the time and the reason, so the crew can review it later.
  9. At the end of the shift, go over any stop calls with the crew, and update the boundary marking if it needs to change.

Use the same call every time, because a new word can be missed in noise. Treat every stop call as a real one, whoever gives it.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes taps, chat and spoken calls between phones, and these signals pass only in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in the browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] STOP cancels every hold and slow order on every phone and shows a full-screen warning to everyone else. [1] Anyone who joins can take part in a voice call run from the phone browser. [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal lead's view of the load stays clear, and whether the phone locks its screen during the lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice calls, that every member can be heard over machine noise, and that the channel stays clear through the whole lift.

Match the option to the crew and the site, and keep a fallback ready in case a phone loses signal.

Common mistakes to avoid

Relying on one phone for the stop call. If that phone loses its signal, the rest of the crew may not get the call, so keep a voice or hand option ready.

Assuming every phone alerts the same way. On Android phones, signals such as STOP make the phone buzz, while iPhone Safari, Apple's web browser, does not buzz, so check the sound and screen on every device. [1]

Leaving a session empty and expecting it to be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the site, and then they are cleared. [1]

Treating a button press as proof that someone has seen the call. Confirm the call out loud as well, so each person hears it and answers.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals pass through a phone browser, so each phone still needs a working data signal for the whole shift. [1] Check the signal coverage at the site before the shift, so the crew knows the phones will stay connected during the lift.

What happens when STOP is pressed in OperatorLink?

STOP cancels every hold and slow order on every phone in the jobsite and shows a full-screen warning to everyone else. [1] HOLD and SLOW work differently, because they stay on for everyone until the last person leaves the jobsite. [1] A crew member who calls STOP should also call it out loud, since the on-screen alert is not the only check the crew should rely on.

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a fresh session and share the new link or QR code with the crew, so nobody is trying to use an old one.

Do STOP signals buzz on every phone in OperatorLink?

On Android phones, the phone buzzes for signals such as STOP. iPhones running Safari, Apple's web browser, do not buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on the screen. Check the sound and screen settings on every phone in the crew before the lift, so nobody misses a signal. Because the buzz differs by phone, treat the spoken call as the main check for everyone.

Can OperatorLink voice calls be used during a lift?

A voice call works in the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as typed chat messages, not spoken. [1] Because the call runs in the phone browser, keep a radio or hand signal as a fallback. Test the voice call and the quick calls before the lift begins, so each person knows how they work on the day.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons