How to call STOP when an aircraft tilts during a lift
How aircraft recovery crews can call STOP when an aircraft tilts during a lift, with steps, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Before the lift starts, agree on who may call STOP, how the crew will hear or see it, and a backup signal if the first one fails. When a tilt is seen, everyone stops moving at once and the person in charge checks the load before any movement restarts. OperatorLink can show a STOP signal to the whole crew. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before a recovery lift starts, the crew should agree on who is allowed to call STOP and what that call means for everyone on the aircraft and on the ground. A tilt can appear quickly, so the person who sees it needs a way to reach the whole crew without waiting for a turn.
Plan a second way to call STOP in case the first one fails, such as a hand signal that the spotter can see from the wing and the tail. Agree on the exact words or signal in advance, and make sure nobody uses that signal for anything else during the lift.
If the crew uses phones, OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] The person who starts the session shares a link or QR code, and each member joins from it. [1] Decide who will watch the phone that shows HOLD and SLOW, because those signals stay on for everyone until the last person leaves. [1]
Step by step
- Before the lift, confirm the person in charge, the spotter and every crew member can see or hear the STOP call.
- Agree on the words or hand signal for STOP and confirm that nobody uses it for anything else.
- When anyone sees a tilt, they call STOP, and the whole crew stops every movement at once.
- Hold the load where it is, and let the recovery lead look at the tilt before any move is made.
- Check the rigging, the lift points and the aircraft's position, and note what changed.
- Only the person in charge gives the go-ahead to restart, and only after the crew confirms they are ready.
- Write down what tilted, when it happened and how the crew responded, so the next lift can plan around it.
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody has to install an app, because the page runs in a phone browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1]
A phone video call app is a second option. For a phone video call app, check whether the crew can keep the call open for the whole lift, whether the spotter stays in view of the screen, and whether the phone locks its screen during the lift.
A two-way radio is a third option. For a two-way radio, check that every crew member can hear the call over the noise on the ramp, that the crew agrees on plain wording, and that the channel stays clear for the whole lift.
Match the option to the crew and the site, and keep a fallback ready, because a phone signal can drop during a lift.
Common mistakes to avoid
Relying on one person to call STOP. If that person cannot be heard or seen, the crew needs another way to stop, so name a backup before the lift.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz; iPhone Safari ignores the buzz, so check the sound and screen on every device before the lift. [1]
Reusing an old session. A jobsite with nobody in it is wiped after 3 idle hours, so start a new session for each shift. [1]
Using an old link. A jobsite link stops working 12 hours after the first person joins it, so share a fresh link or QR code when a new shift begins. [1]
Forgetting that HOLD and SLOW stay on. They stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
Assuming other phones still show a movement signal that is no longer being sent. If a move stops arriving for 2 seconds, the other phones stop showing that movement signal, so check that the crew still sees each move before the lift continues. [1]
Frequently asked questions
Is OperatorLink free to use for aircraft recovery crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] The crew joins from a phone browser, and nothing needs to be installed to use it. [1] Confirm the current status on the day you plan to use it, and check that each phone has a data signal for the whole lift.
What happens when STOP is pressed in OperatorLink?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently, because they stay on for everyone until the last person leaves the jobsite. [1] After a tilt, check with the person in charge that the stop is still in place before the crew restarts any movement.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new shift, start a fresh session and share the new link or QR code with the crew, so nobody joins from an old link by mistake.
Do STOP signals in OperatorLink buzz every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so an iPhone user may only see the alert on screen. [1] Check the sound and screen settings on every phone before the lift, and agree on a backup signal that does not depend on any single phone.
Can aircraft recovery crews talk by voice in OperatorLink?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a radio or hand signal as a fallback for voice during the lift, since a phone call is only one way to reach the crew.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift