How to Call Stop When a Pool Shell Shifts During Placement
Steps for swimming pool installers to call stop when a shell shifts during placement, with a look at OperatorLink, a phone browser signal tool.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
When a shell starts to shift during placement, the first person who sees it calls stop, and everyone on the crew halts movement until the signal person clears it. This page covers what to have ready, a set of steps that works with any signal method, the options that can carry the call, and mistakes to avoid.
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before a shell goes into the hole, the crew needs one clear stop call that everyone knows and one person who can see the shell from where they stand. Name that person and make sure they can watch the shell and the equipment moving it at the same time. Everyone else should know that stop overrides any other instruction, so nobody keeps placing or pulling while the call is out.
Each person near the shell needs a way to receive the call. That might be a voice call, a radio, a hand signal everyone has agreed on, or a phone tool. Check that the call reaches everyone working near the shell, including anyone who cannot see the signal person. Test the method before placement starts, not during it.
If a phone tool is part of the plan, every phone needs a working browser and a data signal for the whole placement. The person who starts the session shares a link or QR code, and the crew joins from it. [1] [1] A session with nobody in it is wiped after 3 idle hours, so start a fresh session for each placement. [1]
Step by step
- Agree on the stop call before placement starts, in plain words that everyone knows, and name the one person allowed to make it.
- Confirm that every person near the shell can receive the call, whether by voice, radio, hand signal or phone.
- Start placement only after the crew has confirmed they heard the stop call.
- At each lift and each move of the shell, the person who sees it shift calls stop at once, without waiting to check whether it matters.
- When stop is called, everyone halts all movement and stays clear of the shell until the signal person clears it.
- Check the shell and the rigging before anyone moves again.
- Resume only when the signal person gives a clear go ahead and each person confirms they heard it.
- Write the stop and its cause in the job notes, so the next crew knows what happened.
If the crew uses OperatorLink, have the person who starts the session open it from a phone browser, since no app install is needed. [1] Pressing STOP releases every held move on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it, so the crew should not rely on a held button to show that a move is still happening. [1]
Tools that can do it
OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in the browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]
A phone video call app is a second option. This page has no published details on one, so check whether the call can stay open for the whole placement, whether everyone at the shell can see the signal person, and whether the phone's screen stays on while the call runs.
A two-way radio is a third option. This page has no published details on one, so check that the crew agrees on plain words for stop, that every member can be heard over machine noise, and that the channel stays clear through the placement.
Match the option to the crew and the site, and keep a fallback ready, since a phone tool depends on each phone's data signal.
Common mistakes to avoid
Relying on one phone for the stop call: if that phone loses its data signal, the rest of the crew may not see the call, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1] Leaving a session empty and expecting it to hold signals for the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1] Using a link from an earlier shift: a jobsite link stops working 12 hours after the first person joins it. [1] Not confirming that a move still arrives: if it stops for 2 seconds, the other phones drop it. [1] Letting a phone lock its screen during placement, so check each phone's screen timeout before the first lift.
Frequently asked questions
Is OperatorLink free to use for pool crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Because the signals travel between phones in a browser, each phone still needs a working data signal for the whole placement, so check the data plan on every phone before relying on it. [1] Check the OperatorLink site for any change before setting up a crew for a longer job.
What happens when STOP is pressed in OperatorLink?
STOP releases every held move on every phone in the jobsite and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [1] After a shell shift, the signal person still needs to confirm that the placement is safe before anyone resumes work.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not work. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For each new placement, start a fresh session and share the new link or QR code with everyone on the crew. [1]
Do STOP signals buzz on every phone in OperatorLink?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. [1] Check the sound and screen settings on every phone before placement starts, so nobody misses a stop call.
Can OperatorLink voice calls run during a shell placement?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice runs through the phone browser, so it depends on each phone's data signal, and a radio or hand signal should stay ready as a fallback for the placement. [1]
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift