2Dig Plain comparisons of crane signalling and jobsite communication tools

How to Call STOP Near a Set Unit

A practical way to call STOP when a module swings near an already-set unit, with steps, tool choices, checks and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Call STOP through the agreed crew communication method as soon as the swinging module needs to stop, then wait for the crew to confirm the situation is clear before continuing. OperatorLink shows STOP to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser. [1]Currently free to use, with no paid plan built yet. [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before the lift, agree on how the crew will call STOP when a module swings toward an already-set unit. Keep the chosen communication method ready for the whole lift. If using OperatorLink, each phone needs a working browser and data signal because button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1]

Make sure everyone knows which signal means STOP and who can call it. If OperatorLink is used, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Keep in mind that Android browsers can make the phone buzz for signals such as STOP, while iPhone Safari ignores the buzz. [1] If the page is used often during the shift, it can be added to the phone's home screen as a standalone app. [1]

Step by step

  1. Before the module is lifted, agree on the exact word or signal that means STOP and make sure every person involved knows who can give it.
  1. Position the crew so the person watching the module and the already-set unit can see the developing clearance clearly. Keep attention on the load and the surrounding work area.
  1. Start the chosen communication method before the lift. If using OperatorLink, the person who starts the jobsite shares a link or QR code and the crew joins from it. [1]
  1. Confirm that the crew members who need the signal are in the session. OperatorLink passes button presses, chat and voice between phones in a phone browser. [1]
  1. Watch the module as it approaches the already-set unit. If the clearance is becoming unsafe or the module needs to stop, call STOP using the agreed method without waiting for another movement.
  1. With OperatorLink, pressing STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] The crew can then stop and assess the module and the set unit before another movement is called.
  1. Do not treat HOLD or SLOW as the same signal as STOP. With OperatorLink, HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1]
  1. If the lift continues after a STOP call, repeat the agreed STOP signal and keep the crew focused on the load and the clearance. If using OperatorLink, anyone who joins can take part in a voice call run from the phone browser. [1]
  1. Before movement starts again, make sure the crew understands the next movement and that the module has the needed clearance from the already-set unit.
  1. At the end of the shift, everyone can leave the OperatorLink jobsite. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app; the page runs in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole lift, whether the person watching the module stays visible, and whether the phone remains usable when the module moves near the set unit.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

For any option, agree on the STOP call before the lift and check that the people who need to act can receive it. If OperatorLink is used, one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]

Common mistakes to avoid

Waiting for the module to get closer before calling STOP can leave less time to react, so call it when the developing movement requires the lift to stop.

Assuming every phone alerts in the same way can cause confusion. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check the screen and alert behavior on each device before the lift.

Leaving an empty OperatorLink jobsite and expecting it to remain available for a later shift can cause a problem because a jobsite with nobody in it is wiped after 3 idle hours. [1]

Forgetting that an OperatorLink HOLD or SLOW signal stays on for everyone until the last person leaves can also cause confusion about the next movement. [1]

If a move is being sent through OperatorLink, holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1]

Frequently asked questions

How does OperatorLink call STOP?

OperatorLink shows STOP to the jobsite crew through a phone browser. [1] When STOP is pressed, every held direction is released on every phone and everyone else sees a full-screen alert. [1] The crew can then pause the movement and assess the module and the already-set unit before another movement is called.

Can OperatorLink show STOP on every phone?

OperatorLink passes button presses between phones in a phone browser, and STOP releases every held direction on every phone while showing a full-screen alert to everyone else. [1] [1] Each phone used for the session needs a working browser and data signal so the signals can pass between phones. [1]

Does OperatorLink need an app install?

OperatorLink runs in a phone browser with no app install. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] The page can also be added to a phone's home screen as a standalone app. [1]

How long does an OperatorLink jobsite link work?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a later shift, check that the jobsite link is still usable before relying on it for the lift.

Can OperatorLink crew members talk during a lift?

Anyone who joins an OperatorLink jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Button presses, chat and voice pass between phones in a browser. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons