2Dig Plain comparisons of crane signalling and jobsite communication tools

How to call stop when a load moves with the vessel

What marine crane crews need ready to call stop when a load moves with the vessel, the steps to follow, and what to check before choosing a signal tool.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

A stop call on a marine crane job only works if the crew has agreed in advance who may call it, how the call reaches each person, and what each person does when it arrives. OperatorLink can carry STOP to the other phones in a browser session, where STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Marine crane crews need a stop call that everyone on the deck can see or hear before a load moves with the vessel. Decide who may call stop, so that one named person makes the call and the rest of the crew knows who it is. Agree on the words and any hand signal that go with it, and check that every person on the lift knows them.

Check that each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours, so check whether a new jobsite is needed. [1] The page can be added to a phone's home screen, where it opens as a standalone app. [1]

Step by step

  1. Check that each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [1]
  2. Have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  3. That person shares the link or QR code with the crew, and each member joins from it. [1]
  4. Confirm every crew member is in the session before the lift begins, so that each one can see the same signals. [1]
  5. Agree which signals stay on. HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [1]
  6. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while the move is needed. [1]
  7. Run one practice stop call with the whole crew before the lift, and note anyone who did not see or hear it.
  8. Use the one-tap calls Go Ahead, Copy That and All Clear to confirm each signal, since they are sent as chat messages. [1]
  9. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
  10. At the end of the shift, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Match the option to the crew and the site, and keep a fallback ready in case a phone loses its data signal.

Common mistakes to avoid

Relying on one phone as the only way to call stop. Keep a voice or hand signal ready in case a phone's data signal drops.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1]

Leaving an empty session and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so the crew should not assume they have cleared. [1]

Not confirming that a move still arrives. Holding a move button keeps sending that move, and if it stops arriving for 2 seconds, the other phones drop it. [1]

Letting a phone go to sleep mid-lift. Check each phone's sleep setting before the lift starts.

Frequently asked questions

Is OperatorLink free to use for marine crane crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The signals are shown through a phone browser, so check that each phone has a working data signal for the whole shift. [1] The product needs no app install, so the crew can open it from the browser on each phone. [1]

What happens when the OperatorLink STOP signal is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW behave differently, since they stay on for everyone until the last person leaves the jobsite. [1] Agree before the lift which signal the crew will use for a stop call, and run one practice call with the whole crew.

Does an OperatorLink jobsite link expire?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a fresh shift, start a new session and share the new link or QR code with the crew. [1]

Do STOP signals buzz every phone in OperatorLink?

On Android browsers, signals such as STOP make the phone buzz. [1] On an iPhone, the crew should watch for the full-screen alert rather than wait for a buzz. [1] Check the sound and screen settings on every phone in the crew before the lift starts.

Can the crew talk by voice with OperatorLink during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Check that voice works on each phone before the lift, and keep a radio or hand signal ready as a fallback.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons