How to call out STOP when debris shifts mid-pull
How demolition and wrecking crews call out STOP when debris shifts mid-pull, what to have ready, the steps, tool choices, and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
When debris moves mid-pull, the crew sends STOP from a session that runs in a phone browser, which they join from a shared link or QR code. [1] [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew that spots the shift sees it at once. [1] Keep a data signal on every phone. iPhone Safari does not buzz on alert, and a session with nobody in it is wiped after 3 hours. [1] [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Every phone in the crew, the operator's included, must have a browser that works and a data signal, since the signals pass over the phone network. [1] Whoever starts the jobsite creates the session and passes its link or QR code along, and the other members join from that. [1] A session left empty is removed after 3 idle hours, so after a long stop the crew should open a new one. [1]
Before the pull, make sure every member who watches the debris is in the same session. STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] The person who spots the shift needs a free hand to press STOP, so agree on which member carries the phone and keeps the screen on. Before the pull starts, put the page on each phone's home screen, where it opens as a standalone app. [1]
Step by step
- Confirm each phone has a browser that works for the full pull, since button presses, chat and voice pass between phones in a browser. [1]
- The person starting the jobsite opens the session in a phone browser, and no app needs installing first. [1]
- The starter sends the link or QR code to the ground crew, and each member opens it to join. [1]
- Before the pull, check that all members have joined, so every phone is showing the same signals. [1]
- Settle who calls what before the pull: STOP releases every held direction on every phone, while HOLD and SLOW remain set for the whole jobsite until the final person walks away. [1] [1]
- A held move button keeps sending its move to the other phones. If the signal stops arriving for 2 seconds, they drop it, so keep watching the load while the button is down. [1]
- When the debris shifts, the spotter presses STOP. It releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and look before moving again. [1]
- The spotter can also send a one-tap radio-style call such as Go Ahead, Copy That or All Clear as a chat message to tell the operator what the debris is doing. [1]
- Anyone who joins the jobsite can take part in a voice call run from the phone browser, and the call depends on the phone's data signal. [1]
- When the pull is finished, each member leaves, and an empty jobsite is wiped after 3 idle hours. [1]
Tools that can do it
Its signals reach the whole crew: STOP, HOLD and SLOW show on each phone, and button presses, chat and voice pass between phones in a browser. [1] [1] There is no app to download first, because the session opens in the phone's browser. [1] Whoever opens the jobsite passes its link or QR code to the crew, and they join through it. [1] A jobsite link stops working 12 hours after the first person joins it. [1]
A phone video call app is a second option, but nothing published covers it here. Ask whether the call can stay connected through the whole pull, whether the signal person's hands remain in view, and whether the screen locks partway through.
A two-way radio is a third option, and no published facts describe it here. Check that the crew agrees on plain voice terms, that each member can be heard over machine noise, and that the channel stays free of other traffic during the pull.
Pick the option that suits this crew and site, and have a backup in place, because browser signals rely on each phone's data connection.
Common mistakes to avoid
Depending on a single phone to carry STOP: if that phone loses its data signal, the others may not receive it, so have a voice or hand option ready. Expecting the same alert on every phone: Android browsers buzz on signals such as STOP, but iPhone Safari ignores the buzz, so check the sound and screen on each device. [1] Missing that HOLD and SLOW remain set for everyone in the jobsite until the last person leaves, so an earlier signal may still be showing. [1] Releasing the button and assuming the move carries on: the other phones drop a move that has stopped arriving for 2 seconds. [1] Counting on a session that sat empty overnight: a jobsite with nobody in it is wiped after 3 idle hours. [1]
Frequently asked questions
Is OperatorLink free to use?
At present OperatorLink costs nothing to use, because no paid plan has been built. [1] Each phone still needs a data signal for the pull, since the session runs in its browser. Check the phone's data plan before relying on it.
What happens to the machines when STOP is pressed?
When STOP is pressed, every held direction is released on each phone in the session, and everyone else gets a full-screen alert. [1] HOLD and SLOW are set for the whole jobsite and stay until the last person has left. [1]
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is also wiped after 3 idle hours. [1] For a fresh pull, start a new session and share the new link or QR code with the crew. [1]
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. [1] Check the sound and screen settings on every phone in the crew before the pull so nobody misses the signal.
Can crew members talk while debris is shifting?
Any member who joins can speak on a voice call started from the phone browser, and quick calls like Go Ahead, Copy That and All Clear go out as chat messages. [1] [1] Since voice rides on each phone's data signal, a radio or hand signal makes a sensible backup.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift