How to call hold while pinning crane boom parts
How to call hold while pinning crane boom parts, with the steps, tool options and mistakes to avoid for a mobile crane assembly crew.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
The crew joins one OperatorLink jobsite session in a phone browser, and HOLD shows on every phone in it. [1] HOLD stays on for everyone until the last person leaves the jobsite. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
A mobile crane assembly crew needs one signal person who can call hold while the boom parts are being pinned, and a way for every crew member to see that call on their own phone. Agree on who the signal person is, which phones are in the session, and how the hold call will be made before the crew moves to the pinning point.
Each phone needs a working browser, because button presses pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the rest of the crew joins from it. [1] Start the session when the crew is ready to work, because a session with nobody in it is wiped after 3 idle hours. [1] A link also stops working 12 hours after the first person joins, so a link from an earlier day may not open the session. [1]
Step by step
- Agree on the hold call before the first pin is placed, and name the one signal person who makes it.
- Check that every phone has a working browser. [1]
- Open the session from a phone browser. No app install is needed. [1]
- Share the link or QR code, and confirm every crew member has joined before any pin goes in. [1]
- Call hold when a pin is about to be placed. HOLD shows to the crew and stays on for everyone until the last person leaves the jobsite. [1] [1]
- Keep each phone in the session for the whole pinning job, so no crew member misses a call.
- Use the one-tap calls for short replies. Go Ahead, Copy That and All Clear are sent as chat messages. [1]
- If anyone sees a problem, press STOP. It releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- When the job ends, everyone leaves the session. A session with nobody in it is wiped after 3 idle hours. [1]
Tools that can do it
It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] The page can also be added to a phone's home screen as a standalone app. [1]
A phone video call app is a second option. This page has no facts about it, so check whether the call stays open through the whole assembly, whether the signal person can see the pin point, and whether the phone's screen stays on while the crew works.
A two-way radio is a third option. This page has no facts about it, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the pinning.
Match the option to the crew and the site, and keep a fallback ready for the pinning job.
Common mistakes to avoid
Relying on one phone to make the call is risky, so keep a voice or hand signal ready as well.
Assuming every phone alerts the same way causes missed calls. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every phone before the first pin. [1]
Forgetting that HOLD stays on for everyone is another common error. It stays on until the last person leaves, so the crew has to plan how the work continues after a hold. [1]
Letting a move run without checking it is a mistake as well. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1]
Reusing an old link is easy to do after a break. A jobsite link stops working 12 hours after the first person joins it. [1] Leaving a session empty overnight is also a mistake, because it is wiped after 3 idle hours. [1]
Frequently asked questions
Is OperatorLink free to use for mobile crane assembly crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Button presses and voice pass between phones in a browser. [1] Check the phone's data plan before the crew relies on it for a lift. No other cost is stated on this page, so confirm the current price before planning a longer job.
What happens when STOP is pressed during pinning?
STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else, so the crew sees it on each phone. [1] HOLD works differently, and stays on for everyone until the last person leaves the jobsite. [1] Plan for both signals before the first pin goes in, and make sure every phone is in the session first.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new assembly day, start a fresh session and share the new link or QR code with the crew, so nobody works from an old link. [1] Check each phone's link before the first pin goes in.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. Before the first pin goes in, check the sound and screen settings on every phone in the crew. Agree on a second way to get attention, such as a hand signal from the signal person, for any phone that is set to silent.
Can the crew talk by voice during a pinning job?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Keep a radio or hand signal as a fallback in case voice is not available during the lift.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift