How to call hold during tower crane pin alignment
How to call hold while a tower crane assembly crew checks pin alignment: what to agree first, step-by-step calls, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Call hold by having the signal person announce it before anyone reaches a pin, and keep the operator watching the signal person until the check is done. On OperatorLink, HOLD stays on for everyone until the last person leaves the jobsite. [1]
| Option | What it does | Fee |
|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] |
| Phone video call app | not published | not published |
| Two-way radio | not published | not published |
What you need before you start
Before anyone calls hold for a pin alignment check, the assembly crew should agree who the signal person is, who may call hold, and which call the operator must act on. Settle this before the first pin is lined up, so nobody has to guess in the middle of a lift.
Confirm that each person can see or hear the call from where they stand, and that the operator can see the signal person at all times. Agree on one word for hold so the crew does not mix terms. Keep the pin area clear of anyone not on the task, and decide where the operator will watch from.
If a phone is part of the plan, check that it has a working data signal across the whole work area. A shared phone session needs a link or QR code from the person who starts it, and everyone joins from that same link. [1] Keep a backup method ready, such as a radio or a plain hand signal, in case a phone drops out.
Step by step
- Before anyone reaches for a pin, agree on the hold call, the signal person, and who may call hold.
- Tell the operator what hold means for this lift, and confirm the operator will watch the signal person until the check is done.
- Make sure every person on the crew can see or hear the call from where they stand.
- Call hold, and wait until the operator has acknowledged it before anyone moves to the pins.
- Check pin alignment while the hold stays in place, and keep the signal person's view of the operator clear.
- If the crew uses OperatorLink, press HOLD on the phone so it shows to the crew, and remember that it stays on for everyone until the last person leaves the jobsite. [1] [1]
- When the pins are aligned and the crew is ready, send the all clear and say it aloud to the operator as well. On OperatorLink, All Clear is a one-tap call that is sent as a chat message. [1]
- If anyone sees a problem at any point, call stop straight away and do not wait for the check to finish. On OperatorLink, STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app, because the page runs in a browser. [1] The person who starts the crew's online session shares a link or QR code, and the crew joins from it. [1]
Other options exist for calling hold, such as a phone video call or a two-way radio. The facts available for this page do not describe either one, so check whether the call can stay open for the whole pin check, whether the signal person's view of the operator stays clear, and whether the phone's screen locks during the check.
For a two-way radio, check that every crew member can hear the calls over the noise at the site, and that the channel stays clear for the whole check.
Match the option to the crew and the site, and keep a fallback ready, since a phone browser depends on each phone's data signal.
Common mistakes to avoid
Relying on one phone to carry the hold: if that phone loses its data signal, the rest of the crew may not see the call, so keep a voice or hand signal ready. Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so people using iPhones must watch the screen. [1] Reusing an old link from a previous shift: a jobsite link stops working 12 hours after the first person joins it. [1] Leaving a jobsite session empty and expecting it to be there the next morning: a jobsite with nobody in it is wiped after 3 idle hours. [1] Forgetting that HOLD stays on for everyone until the last person leaves, so the crew should plan for that before the check begins. [1] Letting the phone lock its screen during the check: the page can be added to the home screen as a standalone app, so open it from there before the lift starts. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Because it runs in a phone browser, each phone still needs a working data signal for the whole check. [1] Check the phone's data plan before the day of the lift, so the crew knows what to expect if a signal drops during the check.
What does HOLD do on OperatorLink during a pin check?
HOLD is shown to the jobsite crew on each phone in the browser. [1] It stays on for everyone in the jobsite and is cleared when the last person leaves, so the crew should agree before the check starts what happens if someone steps away from their phone. [1] Confirm with the crew that everyone understands HOLD is still active until the check is finished and the signal person says otherwise.
Does STOP on OperatorLink reach every phone at once?
STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz, so people using iPhones need to watch the screen. [1] Keep a voice or hand signal ready as well, so the crew has more than one way to stop the work.
How long does an OperatorLink jobsite stay open?
A jobsite link stops working 12 hours after the first person joins it. [1] The crew's online session is deleted after nobody has been in it for 3 hours. [1] For a new shift, start a new session and share the new link or QR code with the crew, so everyone joins from a link that still works.
Can OperatorLink carry voice during a pin alignment check?
Anyone who joins the crew's online session can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice depends on each phone's data signal, so keep a radio or hand signal as a fallback for the check.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift