2Dig Plain comparisons of crane signalling and jobsite communication tools

How to Call HOLD for Tandem Sideboom Cranes

Learn how pipeline crews can call HOLD during tandem sideboom crane work, prepare phones or radios, share signals, and check common communication mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

When sideboom cranes need to work in tandem, agree on the meaning of HOLD before the lift, confirm who can call it, and make sure every operator and ground crew member knows how to receive it. OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The person who starts the jobsite shares a link or QR code for the crew to join. [1] HOLD stays on for everyone in the jobsite until the last person leaves. [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser. [1]Currently free to use, with no paid plan built yet. [1]not published
Two-way radionot publishednot publishednot published
Phone video call appnot publishednot publishednot published
Direct voice communicationnot publishednot publishednot published

What you need before you start

Before sideboom cranes work in tandem on a pipeline construction job, agree on the word HOLD and what the crew must do when it is called. Make sure every operator, signal person and other crew member involved in the lift knows how to send and receive the signal. Decide who can call HOLD, how everyone will acknowledge it, and how the crew will communicate when the load must remain still.

Have the communication method ready before the lift begins. If using OperatorLink, each person needs a phone browser and a working data signal because button presses, chat and voice pass between phones in a browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] No app install is needed to open it in a phone browser. [1]

Agree on what happens after HOLD is called. OperatorLink keeps HOLD on for everyone in the jobsite until the last person leaves. [1] The crew should understand how that behavior differs from STOP, which releases every held direction on every phone and displays a full-screen alert to everyone else. [1]

Keep the communication plan clear and consistent. Decide how the crew will confirm that every operator has received HOLD, what method will serve as a backup, and who will give the signal to resume work. Check the phones, radios or other chosen equipment before moving the load.

Step by step

  1. Agree on the HOLD instruction. Before the tandem lift, explain what HOLD means for the sideboom operators and the ground crew. Establish that the crew must follow the agreed stop-and-wait procedure when HOLD is called, and decide who is authorized to give the instruction.
  1. Choose the communication method. Use the method agreed for the lift, such as a radio, an available phone communication option, or OperatorLink. Confirm that the operators and signal person can use it and know how to identify a HOLD instruction. Do not begin the lift until the crew understands the communication plan.
  1. Check the equipment and signal. If using phones, confirm that each phone can open its browser and has a working data signal. OperatorLink passes button presses, chat and voice between phones in a browser. [1] If using radios, check that the crew can communicate clearly on the agreed channel. Confirm the backup communication method before the load moves.
  1. Bring the crew into the same jobsite session. For OperatorLink, the person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] Confirm that the people who need the signal have joined and can see the controls before the lift begins. A jobsite link stops working 12 hours after the first person joins it. [1]
  1. Explain how HOLD appears. In OperatorLink, HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [1] Make sure the crew understands that HOLD remains active and is not the same as a brief spoken message. Agree on how to confirm that the instruction has been received.
  1. Call HOLD clearly when the lift needs to pause. Use the agreed communication method and the established instruction. With OperatorLink, the crew can use the HOLD control, while button presses, chat and voice pass between phones in a browser. [1] Do not assume that sending an instruction proves every operator has received or understood it. Use the agreed confirmation procedure.
  1. Confirm the status before any movement resumes. Check that the operators and ground crew understand the current instruction and that the reason for HOLD has been addressed. Follow the lift's agreed communication procedure before resuming movement. Do not treat a cleared screen or a quiet radio as permission to move without confirmation.
  1. Close the communication session after the work. When using OperatorLink, remember that a jobsite with nobody in it is wiped after 3 idle hours. [1] Start a fresh jobsite for a later shift when needed, and share the new link or QR code with the crew. [1] Review any communication problem before the next tandem lift.

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The page runs in a browser, so nobody needs to install an app. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] Anyone who joins can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] [1] OperatorLink is currently free to use, and no paid plan is built yet. [1] Check that the phone data signal covers the work area and that everyone understands how HOLD stays active until the last person leaves. [1]

A two-way radio is another option for calling HOLD during tandem crane work. Agree on the channel and the words used for each instruction before the lift. Check whether the operators and ground crew can hear one another over machine noise, and establish how each operator will acknowledge HOLD. The available facts here do not specify radio models, costs or technical features, so check those details with the radio supplier.

A phone video call app is another option to consider. Check whether the crew can keep the call available throughout the lift, whether the signal person remains visible to the operators, and how the crew will communicate a clear HOLD instruction if the video view is blocked. The available facts here do not establish the features, fees or limits of any particular video call app.

Direct voice communication is also an option where the crew can hear and understand the agreed instruction. Establish who is speaking, who must acknowledge HOLD, and what the crew will do if the instruction is unclear. Check that the method remains suitable for the work area and that a backup is available.

Compare the options against the crew's actual work conditions. Check communication coverage, clear acknowledgement, the ability to reach every operator, and what happens if the primary method stops working. Do not choose a method based only on convenience.

Common mistakes to avoid

Assuming every operator has heard HOLD can leave the crew uncertain about the current instruction. Set an acknowledgement procedure before the lift and use it whenever HOLD is called.

Using different meanings for the same word can confuse a tandem crew. Agree on the exact meaning of HOLD and the steps required before work resumes. Make sure every operator and signal person knows who can issue the instruction.

Forgetting that phone communication depends on a working data signal can interrupt messages between devices. OperatorLink passes button presses, chat and voice between phones in a browser. [1] Check the connection before work and keep an agreed backup available.

Assuming all phones alert in the same way is another risk. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] Check what each crew member can see and hear on their own device before relying on the method.

Treating HOLD as a momentary signal can cause confusion when it remains visible. In OperatorLink, HOLD stays on for everyone in the jobsite until the last person leaves. [1] Explain this behavior before the lift and agree how the crew will confirm the next instruction.

Leaving an old phone session open for a later shift can also cause trouble. An OperatorLink jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1] Start a fresh session when needed and make sure the crew has the current link or QR code. [1]

Frequently asked questions

How should pipeline crews call HOLD for tandem sideboom cranes?

Agree on the meaning of HOLD before the lift, decide who can call it, and establish how each operator must acknowledge the instruction. Use the communication method agreed for the job and confirm that every person involved can receive the signal. Do not resume movement until the crew has confirmed the current instruction and followed the agreed procedure.

Can OperatorLink show HOLD to tandem crane operators?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] HOLD stays on for everyone in the jobsite until the last person leaves. [1] The crew should agree in advance how operators will acknowledge HOLD and confirm permission to resume.

Is OperatorLink free for pipeline construction crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser without requiring an app install. [1] Button presses, chat and voice pass between phones in a browser. [1] Check that the phones have a working data signal and that the crew has an agreed backup communication method.

Does OperatorLink work without a phone signal?

OperatorLink passes button presses, chat and voice between phones in a browser. [1] The approved product information does not establish offline operation. Check phone data coverage in the work area before the lift, and establish a backup communication method in case the connection is unavailable or a message does not arrive.

What happens when HOLD is called in OperatorLink?

HOLD stays on for everyone in the jobsite and is cleared when the last person leaves. [1] This differs from STOP, which releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Before the lift, explain these behaviors and agree on how the crew will confirm that it is safe to resume.

How do pipeline crews join an OperatorLink jobsite?

The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink runs in a phone browser, so an app install is not needed. [1] Check that every person who needs to receive the signal has joined the correct jobsite before the lift begins.

How long does an OperatorLink jobsite stay available?

An OperatorLink jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a later shift, start a new jobsite when needed and share the new link or QR code with the crew. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons