2Dig Plain comparisons of crane signalling and jobsite communication tools

How to call hold when dynamic positioning shifts a vessel

Steps to call hold when dynamic positioning moves a vessel during subsea installation, with what to ready, tool options and mistakes to avoid.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink is one option for passing hold calls between phones on a crew, and it shows STOP, HOLD and SLOW in a phone browser. [1] Other options exist, and the vessel's own procedures decide who calls hold and what the crew acts on.

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Before any hold call, the crew needs a clear chain of who makes the call and who acts on it. The dynamic positioning operator works from the vessel's own controls and procedures, and every hold call should follow those. Agree on the exact words for each call before the job starts, and confirm that everyone on the subsea spread knows them. Check that every person who needs to call or hear a hold has a working phone or radio, because a call that does not arrive cannot be acted on.

If a phone browser is one of the options, OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] The person who starts the jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, so start a fresh session for a new shift. [1] Treat any app as a way to pass a call, and keep the vessel's own procedures as the authority on what the crew does.

Step by step

  1. Confirm the vessel's dynamic positioning procedures for calling hold, and make sure the operator and the crew have read them.
  2. Agree on the words and the order of calls, including who may call hold and who must confirm it.
  3. Check that each phone has a working browser and a data signal for the whole shift, because the signals pass between phones in a browser. [1]
  4. If using OperatorLink, have the person who starts the jobsite open the session from a phone browser, with no app install needed. [1]
  5. Share the link or QR code with the crew, and confirm each member has joined before the vessel moves into position. [1]
  6. Pressing a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while the move is in progress. [1]
  7. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so pause and confirm the vessel's position before anything moves again. [1]
  8. Once the vessel is holding, clear HOLD on purpose, because it stays on for everyone until the last person leaves. [1]
  9. At the end of the job, everyone leaves the session, and note that a jobsite with nobody in it is wiped after 3 idle hours. [1]

Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app, because the page runs in a browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole job, whether the operator's hands and the vessel's controls stay in view, and whether the phone locks its screen during a move.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice calls, that every member can be heard over the noise of the vessel and the subsea spread, and that the channel stays clear through the operation.

Match the option to the crew and the vessel, and keep a fallback ready, since phone browser signals depend on each phone's data signal.

Common mistakes to avoid

Relying on one phone for the STOP signal. If that phone's data signal drops, the rest of the crew does not see the signal, so keep a voice or radio option ready. [1]

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device before the operation starts. [1]

Leaving HOLD on by accident or assuming it clears itself. HOLD and SLOW stay on for everyone until the last person leaves, so the crew has to clear them on purpose. [1]

Missing that a move has stopped arriving. If a move stops arriving for 2 seconds, the other phones drop it, so confirm the move is still being received. [1]

Reusing an old session the next day. A jobsite with nobody in it is wiped after 3 idle hours, and a jobsite link stops working 12 hours after the first person joins it. [1] [1]

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so the crew opens it from the phones they already carry. [1] Because prices can change, check the current terms before relying on it for a long project, and confirm that the phones keep a working data signal for the whole shift.

What happens when OperatorLink's STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW work differently, because they stay on for everyone in the jobsite until the last person leaves. [1] Agree in advance on what each crew member does after a STOP, so the vessel's own procedures remain the guide for the next move.

How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] For a new shift, start a new session and share the new link or QR code with the crew.

Do STOP signals in OperatorLink buzz every phone?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz. Check the sound and screen settings on every phone in the crew before the operation starts, so no one misses a signal.

Can OperatorLink carry voice calls for a subsea crew?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are also sent as chat messages. [1] Whether that suits the vessel's own communication needs is for the crew to check against its procedures before relying on it.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons