How to call hold when a section swings in wind
How cell tower erection crews call HOLD while a section swings in the wind, plus what to have ready, the steps, the tool choices and the usual mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
When wind swings a section during a cell tower lift, the crew calls HOLD, the move stops and the section hangs where it is, and HOLD stays up for everyone in the jobsite until the last person leaves it. [1]
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Puts STOP, HOLD and SLOW in front of the jobsite crew and passes button presses, chat and voice between phones in a browser [1] | Free to use right now, with no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Wind catches a tower section and moves it, so the crew needs a way to call hold before the lift starts. Each phone in the crew needs a browser that opens, since the signals pass between phones in a browser. [1] One person opens the jobsite and hands out a link or QR code, and the other members join from that. [1] Settle in advance whose screen carries the HOLD, because once HOLD is set it shows for the whole crew until the last person steps out of the jobsite. [1] If the crew walked away and the jobsite sat empty, it gets wiped after 3 idle hours, so start a new session for the new shift. [1] Talk over what wind is enough to hold on, and who makes that call, before the crew sends anything up. Agree the fallback too: hand signals and voice, settled before anything leaves the ground.
Step by step
- Look at the wind and the section, and name out loud the person who will call the hold if the section swings.
- Check each phone the crew uses has a browser that opens, since the signals pass between phones in a browser. [1]
- Have the person who starts the jobsite open the session in a phone browser, which needs no install. [1]
- That person sends out the link or QR code, and every crew member joins through it. [1]
- Before the lift, look at each phone and confirm every crew member sits in the same session, so all screens show the same signals. [1]
- Name out loud which signals latch: HOLD and SLOW stay up for everyone in the jobsite and only come down when the last person leaves. [1]
- Holding a move button keeps sending that move to the other phones, and the other phones drop it if it stops arriving for 2 seconds. [1]
- When the wind swings the section, call HOLD at once, everyone stops the move, and the section hangs where it is. [1]
- When the move must stop hard, press STOP, which releases every held direction on every phone and shows a full-screen alert to the rest of the crew, then look before anything moves again. [1]
- If a later shift picks up the same work, start a fresh session, because a jobsite link stops working 12 hours after the first person joins it. [1]
- When the lift ends and everyone leaves, remember an empty jobsite is wiped after 3 idle hours, so the next shift starts fresh. [1]
Tools that can do it
OperatorLink puts STOP, HOLD and SLOW in front of the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] The page runs in a browser, so no install is needed. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] It is free to use right now, and no paid plan is built yet. [1] Anyone in the session can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear arrive as chat messages. [1] [1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [1] The page can be added to the phone home screen so it opens as a standalone app. [1] A jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1]
A phone video call app is a second option. No facts here describe one, so check whether every phone stays in the call through the whole lift, whether the signal person's view of the section is blocked, and whether the screen locks while the crane is moving.
A two-way radio is a third option. No facts here describe one, so check that the crew settles on plain voice, that every member can be heard over machine noise, and that the channel stays clear when the section swings.
Pick the option that suits this crew and this site, and keep a fallback close at hand.
Common mistakes to avoid
Leaning on a single phone for the HOLD or STOP signal: the signal only reaches the crew through phones in the session, so keep a voice or hand option close. [1] Expecting the same alert sound everywhere: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so test the sound and the screen on each device. [1] Leaving an empty session behind and looking for it the next day: a jobsite with nobody in it is wiped after 3 idle hours. [1] Letting HOLD or SLOW be forgotten, since both stay on for everyone until the last person leaves and have to be cleared on purpose. [1] Not watching whether the move still arrives: a move that stops arriving for 2 seconds is dropped by the other phones. [1] Letting the screen sleep through the lift, when adding the page to the home screen as a standalone app keeps the screen within reach. [1]
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan has been built yet. [1]
What happens when the STOP button is pressed?
When STOP is pressed, every held direction is released on every phone, and a full-screen alert shows to the rest of the crew. [1] HOLD and SLOW work the other way: both stay up for everyone in the jobsite and come down only when the last person leaves. [1] Pause and look around before anything moves again.
How long does a jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left over from an earlier shift is gone. [1] For the next shift, open a new session and share a fresh link or QR code with the crew.
Do STOP signals buzz on every phone?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on that phone the alert may only show on screen. Check the sound settings and the screen on every phone in the crew before the lift so nobody misses the call.
Can crew members talk over the phone during a lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear arrive as chat messages. [1] [1] Voice leans on the phone's data signal, so keep a radio or hand signals as backup.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift