2Dig Plain comparisons of crane signalling and jobsite communication tools

How to call hold when a pile twists in the clutch

What sheet pile installers need ready to call hold when a pile twists in the clutch, the steps to follow, tool options and common mistakes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Stop the movement first, make the hold call clearly and early, and keep the crew holding until the signal person gives the all clear. OperatorLink can show HOLD to the jobsite crew in a phone browser, and HOLD stays on for everyone until the last person leaves. [1] [1]

OptionWhat it doesFeeCard fee
OperatorLinkShows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]Currently free to use, no paid plan built yet [1]not published
Phone video call appnot publishednot publishednot published
Two-way radionot publishednot publishednot published

What you need before you start

Sheet pile installers need a signal person who can see the pile and the clutch at the same time, and a crew that already knows what hold means. Agree before the lift on one call for hold, and make sure everyone who can move the pile knows it. Keep a clear line of sight from the signal person to the operator, and keep anyone out of the path of the pile.

Check that every crew member can receive the call, whether by voice, by hand signal or by phone. If phones are part of the plan, button presses, chat and voice pass between phones in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1]

Decide in advance who clears hold. A HOLD signal stays on for everyone in the jobsite until the last person leaves, so the crew should agree on who calls the all clear and how it will be given. [1] Keep a second way to call hold ready as well, since a phone signal can drop.

Step by step

  1. Stop the movement as soon as the pile starts to twist in the clutch, and do not try to correct it while the load is moving.
  2. Call hold in a loud, clear voice or with the agreed signal, and make sure the operator has seen it.
  3. Have the signal person repeat the hold call to the crew and the operator, so nobody is still moving.
  4. Check the twist from a safe position, and confirm that nobody is standing in the path of the pile or the clutch.
  5. Keep the load held while the crew looks at the clutch and the pile fixings, and do not restart until the signal person has checked them. Some crews use STOP for an immediate halt and HOLD for holding the load in place; agree which the crew will use before the lift.
  6. Confirm that each crew member has heard or seen hold and has stopped moving.
  7. Decide with the operator whether the pile needs to be lowered, released or reset before the lift restarts.
  8. When the crew agrees it is safe, the signal person gives the all clear, and the lift restarts slowly.
  9. Note what caused the twist, so the crew can review it before the next pile.

Tools that can do it

OperatorLink is made by the team that publishes this site, 2Dig. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] [1] Nobody needs to install an app, because the page runs in a browser. [1] It is currently free to use, and no paid plan is built yet. [1]

A phone video call app is a second option. Check whether the call stays open for the whole shift and whether the phone locks its screen during the lift.

A two-way radio is a third option. Check that the crew agrees on plain voice calls and that each member can be heard over machine noise.

Match the option to the crew and the site, and keep a fallback ready. Button presses, chat and voice pass between phones in a browser. [1]

Common mistakes to avoid

Waiting for the operator to notice the twist before calling hold. The call should come as soon as the twist is seen.

Relying on one phone or one voice for hold. Keep a second method ready in case a call is missed or a phone goes quiet.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [1]

Reusing an old session the next day. A jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [1] [1]

Forgetting that HOLD stays on for everyone until the last person leaves. [1]

Letting the phone's screen lock during the lift, so the signal goes unseen. Keep each screen awake and in view for the whole shift.

Frequently asked questions

Does OperatorLink show HOLD to the whole crew?

OperatorLink shows HOLD to the jobsite crew, and HOLD stays on for everyone until the last person leaves the jobsite. [1] [1] Because the signal stays on, the crew should agree in advance who calls the all clear, and how that call will be given. Practice the hold call with the crew before the first lift of the shift, so everyone knows what it looks like on their phone and what it sounds like on the radio or by voice.

Does STOP halt every phone at once during a twist?

STOP releases every move being held on every phone in the session and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Some crews use STOP for an immediate halt and HOLD for holding the load in place; agree which the crew will use before the lift. Keep a voice call ready too. Button presses, chat and voice pass between phones in a browser. [1]

How long does an OperatorLink jobsite link keep working?

A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] A jobsite link stops working 12 hours after the first person joins it. [1]

Will an iPhone buzz when OperatorLink sends a STOP?

On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so an iPhone may only show the alert on screen. [1] Before the lift, check the sound and screen settings on every phone in the crew, and make sure each crew member can see their screen during the shift. Do not rely on the buzz alone when a phone may be in a pocket or out of view.

Can OperatorLink carry voice calls between crew members?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Voice passes between phones in a browser, so keep a radio or hand signal as a fallback for hold. [1] Agree in advance which calls the crew will use, so a short reply confirms that hold was seen and understood.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons