How to call hold when a panel swings in the yard
A step-by-step way for precast yard crews to call hold when a panel swings, with what to have ready, tool options and common mistakes.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
To call hold when a panel swings in the yard, the crew needs one agreed hold signal that everyone can see or hear, and a named person who is allowed to make the call. OperatorLink is one option: it shows STOP, HOLD and SLOW to the crew in a phone browser [1].
| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1] | Currently free to use, no paid plan built yet [1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |
What you need before you start
Before a panel is lifted, precast yard crews need one agreed hold signal that every crew member knows, along with a named person who is allowed to call it. Decide who has that authority, and make sure the signal person can see the panel from the spot where it might swing. Agree the wording in advance, so a hold call is short and easy to tell apart from a move call.
If the crew uses phones, the signals pass between phones in a browser. [1] One person starts the jobsite and shares a link or QR code, and the rest of the crew joins from it. [1] A link stops working 12 hours after the first person joins, so check the link before each shift. [1] Decide ahead of time who should be able to call HOLD, because a HOLD stays on for everyone until the last person leaves the jobsite. [1]
Step by step
The steps below apply to any option the crew chooses.
- Confirm who is allowed to call hold, and make sure every crew member knows that person's signal.
- Check that the crane operator can see or hear the signal person from the position where the panel would swing.
- Before the lift starts, make sure every crew member is connected on the same channel, whichever option is in use. With OperatorLink, calling HOLD shows it to the whole jobsite crew. [1]
- When a panel starts to swing, call hold at once and keep the call clear and short.
- If the panel needs an immediate stop, use STOP, which releases every held direction on every phone and shows a full-screen alert to everyone else. [1]
- Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it. [1] Keep checking that moves are still arriving while the panel is controlled.
- Once the panel is set down and safe, clear the hold by having everyone leave the jobsite, because HOLD stays on until the last person leaves. [1]
Tools that can do it
OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [1] Nobody needs to install an app, because the page runs in a browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can also take part in a voice call run from the phone browser. [1]
A phone video call app is a second option. No facts for it are set out here, so check whether the call can stay open for the whole shift, whether the signal person can keep the panel in view, and whether the phone's screen locks during the lift.
A two-way radio is a third option. No facts for it are set out here, so check that the crew agrees on plain voice calls, that each member can be heard over yard noise, and that the channel stays clear while the panel is moving.
Match the option to the crew and the yard, and keep a fallback ready.
Common mistakes to avoid
Relying on one person to call hold. If that person cannot see the panel, nobody may call it in time, so name a backup who can make the call.
Treating the phone as the only channel. If a phone's data signal drops, the crew may not see the call, so keep a voice or hand signal ready as well.
Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every phone. [1]
Forgetting that HOLD stays on for everyone until the last person leaves, so it keeps showing until then. [1]
Reusing an old link on a new shift. A link stops working 12 hours after the first person joins. [1]
Expecting an empty jobsite to still be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [1]
Missing a move that has stopped arriving. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1]
Frequently asked questions
Is OperatorLink free to use for precast yard crews?
OperatorLink is currently free to use, and no paid plan is built yet. [1] Because it runs in a phone browser, the crew should test it before relying on it. The crew does not need to install an app to use it. [1] Costs for other options are not set out on this page, so compare them with their own published sources.
What does STOP do in OperatorLink during a panel swing?
STOP releases every move being held on every phone in the jobsite and shows a full-screen alert to everyone else. [1] HOLD works differently. It stays on for everyone until the last person leaves the jobsite. [1] Before the lift, the crew should agree which signal is for an immediate stop and which is for holding the load in place.
How long does an OperatorLink jobsite link stay active?
A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the jobsite. [1] A jobsite with nobody in it is wiped after 3 idle hours, so treat both the link and the jobsite as short-lived. [1] For each new shift, have the person who starts the jobsite share a fresh link or QR code with the crew. [1]
Does OperatorLink buzz on iPhone when a hold is called?
On Android browsers, signals such as STOP make the phone buzz. [1] iPhone Safari ignores the buzz, so on an iPhone the crew should watch the screen rather than rely on a buzz. Check the sound and screen settings on every phone before the lift, so that no one misses a signal during the swing.
Can OperatorLink be used to talk during a precast yard lift?
Anyone who joins the jobsite can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Button presses, chat and voice pass between phones in a browser. [1] Keep a second channel, such as a plain voice call or a hand signal, ready for the lift.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- How to assess crane signal trainees passing calls clearly
- How to assign crane crews to jobs for crane dispatchers in 2026
- How to assign who gives signals during a pick for lift planners
- How MEWP crews call a stop near overhead hazards
- Calling material lifts to upper decks for scaffolding crews
- How to call hold during tight lifts for plant riggers
- How to call hold when a hose shifts under pressure
- Call hold when a load goes out of level
- Call HOLD when a load nears live process equipment
- How to call hold when a load shifts during a lift