Setcom vs Sordin in 2026
Setcom and Sordin compared for a crane crew: what each publishes, its prices, jobsite setup and how to choose, next to OperatorLink.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
This page sets out what the Setcom and Sordin pages say their products do, next to what OperatorLink does, so a crane crew member can match each option to the signals the crew needs.
| Option | Own fee | Card fee |
|---|---|---|
| Setcom | not published. The company describes the LiberatorMAX system as its least costly wireless solution for work teams of two or more people [1] | not published |
| Sordin | The Supreme Pro-X is listed from 3 499 kr [2]. The Supreme X2 is listed from 3 699 kr [2]. The Supreme X2 SFA is listed from 4 379 kr [2]. The Supreme T2 is listed at 8 295 kr [2]. | not published |
| OperatorLink | Free to use; no paid plan is built yet [3] | not published |
The short answer
A crane crew member needs signals to reach the whole crew and a way for people to talk while the crane moves. Setcom's cited pages describe a wireless system where one base station connects up to seven wireless headsets [1]. Its page also says no console mounting or cable runs are required [1].
Sordin's cited pages list prices for its products, such as 3 699 kr for the Supreme X2 [2]. They also offer free shipping on orders over 500 SEK [2]. Those pages say nothing about how a crew talks or sends signals on a jobsite.
OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [3]. Setcom's cited sources describe a setup with no cable runs, so a crew that wants that should check it directly. Sordin's cited sources say nothing about signals, so a crew with that need should check with Sordin. OperatorLink's sources describe its signal handling [3].
What Setcom and Sordin are built for
Setcom's cited pages describe a wireless system. One base station connects up to seven wireless headsets [1], and the system needs no console mounting, no cable runs for intercom parts, and no soldering or cable crimping [1]. Those facts cover how the system is set up and how many headsets one base station connects. They do not describe how signals reach a crew, so this page does not say what Setcom does for that.
Sordin's cited pages list products and prices. The Supreme X2 is listed from 3 699 kr [2], and the Supreme X2 SFA from 4 379 kr [2]. Sordin offers free shipping on orders over 500 SEK [2]. The cited pages do not say what these products do on a jobsite, so this page does not describe that.
What OperatorLink is built for
OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [3]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [3]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [3]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it [3]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages [3]. Anyone who joins can take part in a voice call run from the phone browser [3].
Pricing and fees
Setcom's cited pages give no price for the LiberatorMAX system, so this page publishes none for Setcom. Sordin's cited pages list prices in kr, such as 3 699 kr for the Supreme X2 [2] and 4 379 kr for the Supreme X2 SFA [2]. Sordin offers free shipping on orders over 500 SEK [2], and its cited pages do not say how that applies to smaller orders.
OperatorLink is currently free to use, and no paid plan is built yet [3]. The card fee is not published for any of the three options, so a crew that expects to pay one should ask each provider before choosing.
Setting it up on a jobsite
Setcom's cited pages say its system needs no console mounting, no cable runs for intercom parts, and no soldering or cable crimping [1]. One base station connects up to seven wireless headsets [1]. The cited facts do not say how crew members join those headsets or how signals pass between them, so confirm that with Setcom before a shift.
The cited Sordin facts do not describe how a Sordin product is set up or how a crew uses one on a jobsite, so check that with Sordin directly.
OperatorLink runs in a phone browser with no app install [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. Phones can add the app to their home screen as a standalone app [3]. A jobsite link stops working 12 hours after the first person joins [3], and a jobsite with nobody in it is wiped after 3 idle hours [3]. Button presses, chat and voice pass between phones in the browser [3].
Things to check before you choose
How many headsets will the crew need? Setcom's cited page says one base station connects up to seven wireless headsets [1], so check whether that count fits a crew of your size.
Will the crane need a console mounted or cable runs for the setup? Setcom's page says its system needs no console mounting, no cable runs for intercom parts, and no soldering or cable crimping [1]. Ask your installer to confirm that for your own crane.
Which signals does the crew need to send? Check that each option passes them to every person before a lift. OperatorLink's STOP releases every held direction on every phone and shows a full-screen alert to everyone else [3].
Are the crew's phones iPhones or Android phones? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [3], so check whether a buzz matters for your crew.
Will a jobsite link last through a long shift? A jobsite link stops working 12 hours after the first person joins [3], so check whether that suits your shifts.
What will Sordin products cost once shipping and card fees are added? Sordin offers free shipping on orders over 500 SEK [2], and the card fee is not published, so ask Sordin before ordering.
How to choose
If the crew needs one base station to connect up to seven wireless headsets, Setcom's cited page describes that [1]. If it needs a setup with no console mounting or cable runs, Setcom's page says none are required [1]. If the crew needs a STOP that reaches every phone, OperatorLink's sources describe one [3], and if it needs HOLD and SLOW to stay on for everyone until the jobsite empties, those sources describe that too [3]. If the crew needs a free start, OperatorLink is currently free to use, and no paid plan is built yet [3]. If the crew wants listed prices for Sordin's products, the cited pages list several, such as 3 699 kr for the Supreme X2 [2]. No single source here covers both a wireless headset setup and signal handling, so check each option against both needs before choosing.
Frequently asked questions
Is Setcom's LiberatorMAX system free?
The facts gathered for this page give no price for Setcom's LiberatorMAX system, so no Setcom price is published here. Check Setcom's pricing directly before comparing it with the options above. Sordin's cited pages list prices in kr, such as 3 699 kr for the Supreme X2 [2]. OperatorLink is currently free to use, and no paid plan is built yet [3]. The card fee is not published for any of them, so ask each provider for it before choosing.
Does Sordin offer free shipping?
Sordin offers free shipping on orders over 500 SEK [2]. The cited pages do not say whether shipping is free on smaller orders, so check Sordin's shipping terms before you order. The Supreme X2 is listed from 3 699 kr [2], and the card fee is not published, so ask Sordin for that before buying.
Does OperatorLink work on iPhone?
OperatorLink runs in a phone browser with no app install [3]. Phones can add it to their home screen as a standalone app [3]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz [3]. A crew with iPhones should check whether the full-screen alert is enough for its needs.
Does one Setcom base station connect a whole crew?
Setcom's cited page says one base station connects up to seven wireless headsets [1]. A crew with more people than that should check with Setcom how it would connect everyone before buying. The facts gathered for this page do not describe how the system passes signals such as STOP, so ask about that separately. Setcom's page also says its system needs no console mounting [1].
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it [3]. A jobsite with nobody in it is wiped after 3 idle hours [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. A crew whose shift runs past 12 hours should check how the link works before the shift starts.
OperatorLink is currently free to use, and no paid plan is built yet. [3]
Try OperatorLinkSources
Related comparisons
- Crane communication headsets compared
- Crane communication headsets for aircraft recovery crews
- Crane communication headsets for amusement ride installers
- Crane communication headsets for apprentice riggers in 2026
- Crane communication headsets for boom truck operators
- Crane communication headsets for bridge construction crews
- Crane communication headsets for bridge crews
- Crane communication headsets for bulk material handlers
- Crane communication headsets for concrete pump operators
- Crane communication headsets for foremen in 2026