Crane communication headsets for boom truck operators in 2026
Compare crane communication headsets and crew tools for boom truck operators on noise, hands-free use, crew size, phone access and published prices.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Crane communication headsets and tools for boom truck operators include OperatorLink, Eartec, Setcom, Crewplex, Sensear, and Sena Industrial. A boom truck operator works with both hands busy on the controls, noise from the truck around the job, and a load that often lands where the operator cannot see it.
| Option | Price | Headset or phone | Crew size |
|---|---|---|---|
| OperatorLink | Free, no paid plan built yet [1] | Phone browser, no app install [1] | not published |
| Eartec | Not published | EPak with Lazer-Pro and PRO16 with Monarch headset systems [2] | Up to 16 users on the same setup [2] |
| Setcom | Not published | LiberatorMAX Wireless Headset with System 977, hands-free and full duplex [3] | One base station for up to seven wireless headsets [3] |
| Crewplex | Not published | Scalable full-duplex hands-free communication, large system [4] | Six to ten users on the large system [4] |
| Sensear | Not published | Headsets with SENS technology [5] | Charge racks for up to 45 headsets, or 6 for smaller needs [5] |
| Sena Industrial | Not published | Hardhat integrated headsets with noise reduction [6] | not published |
What boom truck operators need from crane communication headsets
A boom truck operator drives a truck with a boom on it and unloads or places material with that boom. The truck often sits at the kerb or in a yard while the load lands somewhere the operator cannot see from the seat, so a person on the ground guides it in. Engine and hydraulic noise run under the whole job, and street traffic adds to it. Both hands stay on the controls through a lift, so the work allows a foot pedal, a thumb button, or a headset that leaves the hands free rather than a phone held to the ear. Hearing protection matters across a long delivery day, and a headset has to sit with the hard hat the operator already wears. A crew should compare how each tool carries voice, how a direction from the ground crew reaches the operator, who can join, what each person must do to get started, and whether the gear works on phones the crew already carries.
OperatorLink for boom truck operators
OperatorLink is made by the team that publishes this site. It runs in a phone browser, so no app install is needed. [1] It shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it, and a jobsite with nobody in it is wiped after 3 idle hours. [1][1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
Eartec for boom truck operators
Both the EPak and PRO16 systems let several crew members connect and communicate at the same time on one setup. [2] Eartec says a customer can buy a set, try it, and return it for a full refund if they do not like it. [2] Eartec items must be returned undamaged within 30 calendar days of receipt. [2] Eartec's sources do not give a price for a set, so ask Eartec what a set costs and which headsets come in it.
Setcom for boom truck operators
Setcom's system uses one base station to connect up to seven wireless headsets. [3] The System 977 with the LiberatorMAX Wireless Headset supports hands-free, full duplex, and integration into mobile radios. [3] Setcom lists a business address in Austin, Texas, for a buyer who wants to reach the company before ordering. [3] Ask Setcom what a wireless headset and base station cost for a truck crew, and whether the same gear can be moved between trucks.
Crewplex for boom truck operators
The CrewPlex large system is described as scalable full-duplex hands-free communication for large crews of six to ten people. [4] CrewPlex says its system is built to fit any job size. [4] CrewPlex offers optional integration with two-way radios for multi-site communication. [4] CrewPlex says its full-duplex, hands-free communications can be integrated with mobile two-way communications. [4]
Sensear for boom truck operators
Sensear's headsets let workers communicate face-to-face in noise levels up to 95 dB(A) and via two-way radio and Bluetooth on mobile phones up to 120 dB(A). [5] Sensear's Charge Racks can accommodate up to 45 headsets for large-scale operations and 6 headsets for smaller-scale needs. [5]
Sena Industrial for boom truck operators
Sena hearing protection products feature Bluetooth and Mesh Intercom technologies, and Sena says this allows workers to communicate in loud, busy worksites. [6] Sena hearing protection headsets offer noise reduction, over-the-head earmuffs, and hardhat integrated headsets. [6] The Sena Expand Mesh is a compact communication headset equipped with Mesh Intercom technology for group communication. [6]
Matching the tool to the job
A load that lands where the operator cannot see it needs a direction that stays up. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] Setcom says its System 977 with the LiberatorMAX Wireless Headset works well with hands-free, full duplex, and integration into mobile radios. [3] Sensear says its headsets let people talk face to face in noise up to 95 dB(A). [5] Sensear lists two-way radio and Bluetooth on mobile phones to work up to noise levels of 120 dB(A). [5] Sena lists hardhat integrated headsets, along with noise reduction and over-the-head earmuffs. [6] CrewPlex's optional integration with two-way radios is described for multi-site communication. [4] Both the EPak and PRO16 systems let up to 16 users connect and communicate simultaneously on the same setup. [2] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1]
Questions to ask before you choose
Does a stop from the ground crew reach the operator's ears and the screens at the same moment, or only one of them? Does a direction stay up until each person registers it, or does it clear the moment a finger lifts? Does the headset fit under the hard hat the operator already wears, and does it leave one ear open to the site? How much noise does the headset handle, and does the seller state a limit in decibels? How many people can talk on one setup, and can more join when a second crew arrives? What ships in the box, headset, beltpack, base station or nothing but a phone? What does a set cost, and is the price per person, per truck or per site? Is there a return window, and in what condition must the gear come back? Does the tool run on the phones the crew already carries, or does every person need new hardware? Who charges the batteries, and what does the operator do when one runs out mid delivery? Can a person join from a link, or must a manager set up accounts and groups first? Does the tool reach the far corner of the yard the truck delivers to?
Frequently asked questions
How does a boom truck operator send a stop signal to the crew?
OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser, and STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1][1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] On other gear, ask how a stop travels from the ground to the operator and who sees it.
How many people can join a crane communication system?
Eartec states that both its EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [2] Setcom's system uses one base station to connect up to seven wireless headsets. [3] CrewPlex describes a large system for six to ten users. [4] A truck crew is usually small, so check whether a setup can grow when a second crew arrives.
Do crane communication headsets work with a hard hat?
Sena hearing protection headsets include hardhat integrated headsets, along with noise reduction and over-the-head earmuffs. [6] Sena says its hearing protection products use Bluetooth and Mesh Intercom technologies so workers can communicate in loud, busy worksites. [6] Ask each seller whether the headset sits inside or outside the hat, and whether it needs its own earmuff shell to work.
What does OperatorLink cost for a boom truck crew?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, and the person who starts a jobsite shares a link or QR code that the crew joins from. [1][1] A jobsite link stops working 12 hours after the first person joins it. [1] Headset prices from Eartec and Setcom are not published here, so ask those sellers what a set costs.
Can Eartec's headsets be sent back for a full refund?
Eartec says a customer can buy a set, try it, and return it for a full refund if they do not like it. [2] Eartec items must be returned undamaged within 30 calendar days of receipt. [2] Before a crew commits to a set, check whether the seller offers a trial set or a return window, and in what condition the gear must come back.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
- OperatorLink's own description of itself (the product of this site's publisher)
- Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
- Setcom, setcomcorp.com/industry/crane, read 2026-10-08
- Crewplex, crewplex.com/applications/cranes, read 2026-10-08
- Sensear, sensear.com, read 2026-10-09
- Sena Industrial, senaindustrial.com, read 2026-10-10
Related comparisons
- Crane communication headsets compared
- Crane communication headsets for aircraft recovery crews
- Crane communication headsets for amusement ride installers
- Crane communication headsets for apprentice riggers in 2026
- Crane communication headsets for bridge construction crews
- Crane communication headsets for bridge crews
- Crane communication headsets for bulk material handlers
- Crane communication headsets for concrete pump operators
- Crane communication headsets for foremen in 2026
- Crane communication headsets for project managers in 2026