Sena Industrial vs Sonetics in 2026

Q: Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install . A phone can add it to its home screen as a standalone app . On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz . A crew with iPhones should check whether the full-screen alert is enough for its needs.

Sena Industrial and Sonetics compared for a crane crew: what each tool's pages describe, which prices are published, and what to check before choosing.

By 2Dig · 2026-10-18

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

This page sets out what each tool's sources cover for a crane crew, and what the facts gathered for it do not cover.

Option	Own fee	Card fee	What its own pages describe
Sena Industrial	not published	not published	Its page says it offers lightweight, general-use communication headsets for industrial applications ^[1] It also says it supports communication in construction, manufacturing, food processing and transportation, where group communication is needed ^[1]
Sonetics	not published	not published	No facts were gathered for this page, so what it does is not described here
OperatorLink	Free to use; no paid plan is built yet ^[2]	not published	Shows STOP, HOLD and SLOW to a jobsite crew and passes button presses, chat and voice between phones in a phone browser ^[2]

The short answer

A crane crew member needs signals to reach the whole crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser ^[2]. When a STOP is sent, it releases every held direction on every phone and shows a full-screen alert to everyone else ^[2]. The facts gathered for this page about Sena Industrial are listed in the table below, and this section does not repeat them. Nothing gathered for this page describes what Sonetics does, so this page cannot say which crew needs Sonetics meets. A crew weighing the two should compare each tool's own pages with the signals it needs.

What Sena Industrial, Sonetics is built for

The facts gathered for this page about Sena Industrial are set out in the table below, and this section does not repeat them. No facts were gathered for Sonetics, so this page does not say what Sonetics is built for, and a reader should not assume anything from its name. To learn what Sonetics covers, read its own pages and check them against the jobs a crane crew needs done, such as stopping the crane, holding a move, and calling the crew by voice. Compare those results with the OperatorLink section below, which states what OperatorLink does for the crew. The table is the only place this page states what Sena Industrial's own pages say.

What OperatorLink is built for

OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser ^[2]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else ^[2]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves ^[2]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it ^[2]. One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages ^[2]. Anyone who joins can take part in a voice call run from the phone browser ^[2].

Pricing and fees

The facts gathered for this page give no price or fee for Sena Industrial, so none is published here. No price or fee was gathered for Sonetics either. OperatorLink is currently free to use, and no paid plan is built yet ^[2]. The card fee is not published for OperatorLink. A crew that expects a card fee or a paid plan from either option should ask each provider for its current terms before choosing.

Setting it up on a jobsite

OperatorLink runs in a phone browser with no app install ^[2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it ^[2]. Phones can add the app to their home screen as a standalone app ^[2]. Button presses, chat and voice pass between phones in the browser ^[2]. A jobsite link stops working 12 hours after the first person joins ^[2], and a jobsite with nobody in it is wiped after 3 idle hours ^[2]. The facts gathered for this page do not walk through how either Sena Industrial or Sonetics gets a crew onto a jobsite, so this page does not describe it. The crew should check each provider's own setup steps before a shift.

Things to check before you choose

Which signals does your crew use on a jobsite, such as STOP, HOLD, SLOW, voice calls or one-tap messages? Check that each tool passes those signals before you rely on it on a lift. Which phones does the crew carry? On Android browsers, a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so decide whether a buzz matters for your crew ^[2]. Does a jobsite link that stops working 12 hours after the first person joins suit your shifts? ^[2] What does each option cost once it is in use, and which card fees apply? The facts gathered here publish no card fee for either option and no price for Sena Industrial or Sonetics. Which provider's own pages cover the jobs your crew needs, and has someone read them?

How to choose

If the crew needs a STOP that reaches every phone, OperatorLink's sources describe one that releases every held direction and shows a full-screen alert to everyone else ^[2]. If the crew needs HOLD and SLOW to stay on for everyone until the last person leaves, OperatorLink's sources describe that too ^[2]. If the crew needs a tool at no cost today, OperatorLink is currently free to use ^[2]. For Sena Industrial, the table lists what its own pages say, so compare those descriptions with your needs. For Sonetics, the facts gathered for this page do not describe its features, so check its own pages before deciding.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet ^[2]. The card fee is not published for it, so a crew that expects to pay one should check before choosing. The sources on this page give no other price for OperatorLink. Prices can change, so confirm the current terms with the product before a shift.

Does Sena Industrial publish its prices?

The facts gathered for this page do not include a price or fee for Sena Industrial, so none is published here. The table above lists what its own pages say it does, and that list gives no price either. Check the current prices on Sena Industrial's own site before you compare them with any other option. Ask for a written quote if the crew needs a fixed cost for a job.

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install ^[2]. A phone can add it to its home screen as a standalone app ^[2]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz ^[2]. A crew with iPhones should check whether the full-screen alert is enough for its needs.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it ^[2]. A jobsite with nobody in it is wiped after 3 idle hours ^[2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it ^[2].

What does Sonetics do for a crane crew?

The facts gathered for this page do not describe what Sonetics does, so this page does not say. No price, setup step or feature was gathered for it either. To find out, read Sonetics's own pages and check them against the signals, voice and setup your crew needs. Then compare what you find with the OperatorLink section on this page.

OperatorLink is currently free to use, and no paid plan is built yet. ^[2]

Try OperatorLink