OTTO vs Silynx in 2026
Compare OTTO, Silynx and OperatorLink for a crane crew: what each does, what prices are published, setup on a jobsite, and how to choose.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
This page sets out what OTTO, Silynx and OperatorLink each say they do, what prices are published for them, and where the facts gathered say nothing, so you can check those gaps yourself.
| Option | Own fee | Card fee |
|---|---|---|
| OTTO | not published | not published |
| Silynx | not published | not published |
| OperatorLink | Free to use; no paid plan is built yet [1] | not published |
The short answer
A crane crew member needs signals and calls that reach everyone on the jobsite while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]. For OTTO, the facts gathered for this page describe a registration, an urgent-request phone line and a printed catalog ordering option, and none of them say what its equipment does on a crane jobsite [2] [2] [2]. No facts were gathered for Silynx, so this page cannot say what it does or which needs it meets. The facts gathered for OTTO and Silynx do not address a stop that reaches every phone, which is the need only OperatorLink's claims describe [1].
What OTTO and Silynx are built for
The facts gathered for OTTO come from its own pages, and there are few of them. OTTO says it is ITAR registered [2]. OTTO says urgent requests can be made by phone at 888.234.6886 [2]. OTTO offers a printed catalog ordering option, including branded catalogs [2]. Those facts do not describe how OTTO's gear works on a jobsite, so this page does not say what it does for a crane crew, and a crew that needs to know should ask OTTO directly. No facts were gathered for Silynx for this page, so this page does not describe what Silynx does.
What OperatorLink is built for
OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser [1]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it [1]. One-tap messages such as Go Ahead, Copy That and All Clear are sent as chat [1]. Anyone who joins can take part in a voice call run from the phone browser [1].
Pricing and fees
The facts gathered for OTTO give no price for its products, so its price is not published here. The same is true for Silynx, for which no facts were gathered. OperatorLink is currently free to use, and no paid plan is built yet [1]. The card fee is not published for any of the three, so a crew that expects to pay a card fee should ask each provider for it before choosing. Prices can change, so confirm the current terms before a shift.
Setting it up on a jobsite
OperatorLink runs in a phone browser with no app install [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. Phones can add the app to their home screen as a standalone app [1]. A jobsite link stops working 12 hours after the first person joins it [1], and a jobsite with nobody in it is wiped after 3 idle hours [1]. Button presses, chat and voice pass between phones in the browser [1]. For OTTO, the facts gathered here do not describe how a crew gets connected or how signals pass. The only OTTO fact about contact is its urgent-request phone line at 888.234.6886 [2], which is not a setup step. No facts were gathered for Silynx, so the crew should ask each vendor how to get set up before a shift.
Things to check before you choose
Does your crew need a stop that reaches every phone at once? OperatorLink describes that behavior [1], and the facts gathered for OTTO and Silynx do not, so ask each vendor how its own tool handles a stop. On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [1], so does your crew need that buzz, and which phones does it carry? Will a jobsite link that stops working 12 hours after the first person joins suit your shifts [1]? Who on the crew would call OTTO's urgent-request line at 888.234.6886 [2], and does that fit your schedule? What will Silynx cost, and which of its features does the crew need? The facts gathered for this page do not answer either question, so ask Silynx directly. Which signals does the crew need on a jobsite, and how will you test that each tool passes them before a lift?
How to choose
If the crew needs a stop that reaches every phone, OperatorLink's claims describe a STOP that releases every held direction and shows a full-screen alert to everyone else [1]. If the crew needs HOLD and SLOW to stay on for everyone until the jobsite empties, OperatorLink's claims describe that too [1]. If the crew wants a free start with no paid plan built yet, OperatorLink is currently free to use [1]. If the crew needs urgent requests to a vendor by phone, OTTO's facts give its phone line at 888.234.6886 [2]. If the crew wants printed catalogs, OTTO offers a printed catalog ordering option [2]. The facts gathered for Silynx do not match it to any of these needs, so a crew that wants Silynx should check its fit directly before choosing.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet [1]. The card fee is not published for it, and the facts gathered for this page give no other price. Because prices can change, a crew that plans a longer run should confirm the current terms with the product before relying on them. The same check applies to OTTO and Silynx, since no price for either one is published in the facts gathered here.
Is OTTO ITAR registered?
OTTO says it is ITAR registered [2]. That is the only fact gathered about this registration, so this page does not say what the registration covers for a crane crew. A crew that needs to know what it means for its own work should ask OTTO directly. OTTO also says urgent requests can be made by phone at 888.234.6886 [2], which is the number a crew would use for an urgent request.
Does OperatorLink work on iPhone?
OperatorLink runs in a phone browser with no app install [1]. A phone can add it to its home screen as a standalone app [1]. On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [1]. A crew with iPhones should check whether the full-screen alert covers what the crew needs before a shift.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. A crew whose shift runs past 12 hours should start a new jobsite with a fresh link once the first one stops working.
What does Silynx do for a crane crew?
The facts gathered for this page do not describe Silynx, so this page cannot say what it does for a crane crew or which needs it meets. No prices, setup steps or features were gathered for it either. A crew that is considering Silynx should read its own pages and ask the company directly what its tool does on a jobsite, then compare those answers with the OperatorLink and OTTO facts on this page.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- Crane communication headsets compared
- Crane communication headsets for aircraft recovery crews
- Crane communication headsets for amusement ride installers
- Crane communication headsets for apprentice riggers in 2026
- Crane communication headsets for boom truck operators
- Crane communication headsets for bridge construction crews
- Crane communication headsets for bridge crews
- Crane communication headsets for bulk material handlers
- Crane communication headsets for concrete pump operators
- Crane communication headsets for foremen in 2026