2Dig Plain comparisons of crane signalling and jobsite communication tools

OTTO vs Sensear in 2026

Compare OTTO and Sensear for a crane crew: what each one's own sources describe, published prices, setup on a jobsite, and how to choose between them.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

This page compares OTTO and Sensear for a crane crew, with OperatorLink covered alongside them so that each need of a crew can be matched to the tool whose sources address it.

OptionWhat its sources say it doesOwn feeCard fee
OTTOOTTO describes itself as a manufacturer of two-way radio communications accessories [1]not publishednot published
SensearSensear's Smart Headsets let workers communicate face to face in noise up to 95 dB(A), and by two-way radio and Bluetooth on mobile phones in noise up to 120 dB(A) [2]not publishednot published
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [3]Free to use; no paid plan is built yet [3]not published

The short answer

A crane crew member needs signals that reach the whole crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [3]. OTTO's page describes a mobile all-terrain command unit called DARKSTAR 1, built for rugged environments [1]. The table above gives what each source says it does, and Sensear's facts appear only in that table. The How to choose section below matches each need to the sources that address it.

What OTTO and Sensear are built for

The facts gathered for OTTO on this page cover three points outside the table. OTTO announced a DARKSTAR 1, a mobile all-terrain command unit for rugged environments [1]. OTTO says its products are made in USA manufacturing [1]. It also says it meets strict cybersecurity requirements [1]. The facts gathered for Sensear are set out in the table above and are not repeated here. Neither the OTTO nor the Sensear facts gathered for this page describe stop, hold or slow signals, so a crew should ask each provider how its product handles them.

What OperatorLink is built for

OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser [3]. A STOP cancels every move still held on every phone and shows a full-screen alert to everyone else [3]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [3]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it [3]. One-tap messages such as Go Ahead, Copy That and All Clear are sent as chat [3]. Anyone who joins can take part in a voice call run from the phone browser [3].

Pricing and fees

OperatorLink is currently free to use, and no paid plan is built yet [3]. The facts gathered for OTTO and Sensear on this page give no price for either, so neither price is published here. The card fee is not published for any option on this page. A crew that expects to pay one should ask each provider for it before choosing, and confirm current terms before a shift, since prices can change.

Setting it up on a jobsite

OperatorLink runs in a phone browser with no app install [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. A phone can add the app to its home screen as a standalone app [3]. A jobsite link stops working 12 hours after the first person joins it [3], and a jobsite with nobody in it is wiped after 3 idle hours [3]. Button presses, chat and voice pass between phones in the browser [3]. For OTTO and Sensear, the facts gathered for this page do not describe how a crew is added, how signals pass, or how a jobsite is started, so each provider should confirm its own setup before a shift.

Things to check before you choose

Which signals does your crew need on a jobsite, such as STOP, HOLD and SLOW, and how will you check that each tool passes them before a lift?

Does a jobsite link that stops working 12 hours after the first person joins suit your shifts? [3]

On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so ask whether a buzz alert matters for your crew [3].

Does your crew need headsets for loud work areas, and does it also need signals passed between phones?

Which noise levels and radio links does your work involve, and has each provider confirmed them for your site?

How to choose

If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that cancels every move still held on every phone and shows a full-screen alert to everyone else [3]. If the crew needs HOLD and SLOW to stay on for everyone until the last person leaves, OperatorLink's sources describe that as well [3]. If the crew wants a tool with no paid plan to start with, OperatorLink is currently free to use and no paid plan is built yet [3]. If the crew needs headsets for loud work, the Sensear row in the table above gives what its source states. If the crew needs two-way radio accessories, the OTTO row in the table above gives what its source says it does. A crew that needs both signal handling and headsets should check each option against both needs, because the facts gathered here do not cover both on any one option.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [3]. Prices can change, so a crew should check the current terms with the product before a shift. The facts gathered for OTTO and Sensear on this page give no price for either, so this page cannot say what either costs. Ask each provider for its current price and its card fee before choosing, since neither card fee is published here.

Does Sensear work with two-way radios?

This page does not repeat Sensear's facts outside the table, so the answer is in the Sensear row of the table above. Confirm radio use with Sensear directly before buying headsets for a crew. Ask which radios and phones it supports, and whether the wording it publishes matches the way your crew works on site.

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install [3]. A phone can add it to its home screen as a standalone app [3]. On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [3]. A crew with iPhones should decide whether the on-screen alert is enough for its needs, and check that button presses and voice come through on its own phones.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it [3]. A jobsite with nobody in it is wiped after 3 idle hours [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. A crew whose shift runs past 12 hours should start a new jobsite with a fresh link, so that everyone joins a live room.

Does OTTO make its products in the USA?

OTTO says its products are made in USA manufacturing [1]. OTTO also says it meets strict cybersecurity requirements [1]. Those are the only OTTO facts this page cites outside its table, so the table gives its radio accessory description and the crew should read OTTO's own pages for anything more. Check the terms of any purchase with OTTO directly before ordering for a jobsite.

OperatorLink is currently free to use, and no paid plan is built yet. [3]

Try OperatorLink

Sources

  1. OTTO, otto-comm.com, read 2026-10-16
  2. Sensear, sensear.com, read 2026-10-09
  3. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons