2Dig Plain comparisons of crane signalling and jobsite communication tools

Eartec vs Sordin in 2026

Compare Eartec and Sordin for a crane crew: what each one's pages state, the prices listed, setup on a jobsite, and how to choose between them.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

This page sets out what the pages of Eartec and Sordin state, the prices they list, how a crew gets set up on a jobsite, and what to check before choosing. OperatorLink is included as one more option, and it is recommended only where its own approved claims fit a crew's need.

OptionOwn feeCard fee
EartecHeadset price not published here; the Expedited shipping fee is deducted from a refund if the set is returned [1]not published
SordinSupreme T2 at 8 295 kr [2]; Supreme Pro-X from 3 499 kr [2]not published
OperatorLinkFree to use; no paid plan is built yet [3]not published

The short answer

A crane crew member needs signals to reach the whole crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [3]. Eartec's page says its Lazer-Pro headsets carry an IP65 rating for dust and water resistance [1]. Sordin lists a Supreme T2 at 8 295 kr [2]. The facts gathered for this page do not describe how either Eartec or Sordin passes a signal on a jobsite, so check that directly with each company. Which option fits depends on whether the crew needs a shared stop signal or a rated headset.

What Eartec and Sordin are built for

Eartec's page says orders ship within 1 to 3 business days [1]. The same page gives the Lazer-Pro headsets an IP65 rating for dust and water resistance, meaning they are fully dustproof and waterproof [1]. Beyond shipping and that rating, the facts gathered for this page say nothing else about Eartec's products, so check its own pages for what the headsets do on a crane.

Sordin lists a refurbish kit for the X2 and T2 at 999 kr [2] and a refurbish kit for the Pro and Pro-X at 979 kr [2]. The facts gathered for this page do not say what Sordin's products do for a crane crew, so check Sordin's own pages for that before comparing.

What OperatorLink is built for

OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [3]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [3]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [3]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it [3]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat [3]. Anyone who joins can take part in a voice call run from the phone browser [3].

Pricing and fees

Eartec's page says that if you select Expedited shipping to ship your set and decide to return it, the shipping fee will be deducted from your refund [1]. The facts gathered for this page give no Eartec headset price, so that price is not published here.

Sordin lists a Supreme T2 at 8 295 kr [2]. The facts gathered for this page do not publish a card fee for Sordin.

OperatorLink is currently free to use, and no paid plan is built yet [3]. No card fee is published for OperatorLink either. A crew that expects to pay a card fee should ask each provider before choosing. The table above sets the three options side by side, with each cell giving the same parts.

Setting it up on a jobsite

OperatorLink runs in a phone browser with no app install [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. Phones can add the app to their home screen as a standalone app [3]. Button presses, chat and voice pass between phones in the browser [3]. A jobsite link stops working 12 hours after the first person joins it [3], and a jobsite with nobody in it is wiped after 3 idle hours [3].

The facts gathered for this page do not describe how an Eartec or Sordin crew is set up, or how signals pass between their products on a jobsite. Check that with each company before a lift.

Things to check before you choose

Which signals does the crew need on a jobsite, and does each option's source describe them? Settle this before the first shift, not after.

Which phones does the crew use? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters for your crew [3].

Does a jobsite link that stops working 12 hours after the first person joins suit your shifts? [3]

What dust and water resistance does the crew need, and does each headset's page state a rating for it?

Which terms apply to each order, including any refund deduction for shipping?

How to choose

If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that releases every held direction and shows a full-screen alert to everyone else [3]. If the crew needs HOLD and SLOW to stay on for everyone until the jobsite empties, OperatorLink describes that as well [3]. If the crew needs a headset rated for dust and water, the Eartec page gives an IP65 rating for the Lazer-Pro [1]. If the crew needs an order sent out quickly, Eartec's page says orders ship within 1 to 3 business days [1]. If the crew wants a refurbished Sordin kit, the listed prices are 999 kr for the X2 and T2 kit [2] and 979 kr for the Pro and Pro-X kit [2]. If the crew wants a tool with no price today, OperatorLink is currently free to use [3]. A crew that needs both a stop that reaches every phone and a rated headset should test each option against both needs, because no single source here covers both.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [3]. The sources cited on this page give no other price for it. Neither Eartec nor Sordin has a card fee published in the facts gathered here, so no card fee is listed for any option in the table. Prices can change, so confirm the current terms with the product before a shift.

Does Eartec charge a shipping fee on returns?

Eartec's page says that if you select Expedited shipping to ship your set and decide to return it, the shipping fee will be deducted from your refund [1]. The facts gathered for this page do not describe the refund terms beyond that, so read Eartec's return conditions before ordering. Orders ship within 1 to 3 business days [1], which is a separate point from returns.

What does the Sordin Supreme T2 cost? [[f:sordin-561db6a9]]

Sordin lists the Supreme T2 at 8 295 kr [2]. The facts gathered here do not give any other Sordin price for that model, and they do not say what the T2 includes. [2] Check the current listing on Sordin's own site before buying, because listed prices can change.

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install [3]. A phone can add it to its home screen as a standalone app [3]. On Android browsers, a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [3]. A crew with iPhones should check whether the full-screen alert is enough for its needs.

How dust and water resistant are Eartec's Lazer-Pro headsets?

Eartec's page says the Lazer-Pro headsets carry an IP65 rating, meaning they are fully dustproof and waterproof [1]. That is the only rating the facts gathered here give for Eartec, so ratings for other Eartec parts are not published on this page. Check the rating for the exact model you plan to order before a shift, and ask Eartec for any rating that applies to the rest of the set.

OperatorLink is currently free to use, and no paid plan is built yet. [3]

Try OperatorLink

Sources

  1. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  2. Sordin, sordin.com, read 2026-10-16
  3. OperatorLink's own description of itself (the product of this site's publisher)

Related comparisons