2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for safety compliance officers in 2026

Compare crane communication headsets for safety compliance officers on stop signals, crew reach, noise handling and published prices.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

This page compares crane communication options on the points a safety compliance officer checks: stop signals, how many people one setup reaches, noise handling, and what each source publishes about price. OperatorLink is a phone-browser option that shows STOP, HOLD and SLOW to the crew [1]. Eartec, Setcom, Crewplex and Sensear are covered below with the facts each source gives, and the table sets them side by side.

OptionWhat its source says it doesPrice or feeDevice and setup
OperatorLinkShows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones [1]Free to use; no paid plan built yet [1]Phone browser, no app install [1]
EartecUp to 16 users on one setup, per the company [2]Not published; an expedited shipping fee is deducted from a refund if the set is returned [2]The Lazer-Pro headset links to the radio via Bluetooth compatibility, eliminating wires and cables [2]
SetcomUp to seven wireless headsets on one base station [3]Not publishedHeadsets pair by being set to the same channel [3]
CrewplexScales from small crews to large crews, with optional two-way radio integration [4]Not published; products are backed by a two-year warranty [4]Full-duplex, hands-free communication, per the company [4]
SensearSmart Headsets for face-to-face talk in noise levels up to 95 dB(A) [5]Not publishedCharge racks accommodate up to 45 headsets [5]

What safety compliance officers need from crane communication headsets

A safety compliance officer checks that crane crews follow the site's communication rules and that every signal reaches the people who need it before a load moves. Headsets matter because a signal that cannot be heard over engine and machinery noise can be missed. The number of people one setup reaches, and how a crew joins it, decide whether the rules can be followed in practice. Cost matters too, because a tool chosen for one crew may need to cover several crews over a year. The officer should ask each vendor what it publishes, what the tool shows on screen when a stop is given, and what happens when a connection drops. Each choice should be checked against the site's written plan, the signal person's training and the employer's rules first.

OperatorLink for safety compliance officers

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install [1]. Button presses, chat and voice pass between phones in the browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite until the last person leaves [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. A jobsite link stops working 12 hours after the first person joins it [1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1]. OperatorLink is currently free to use, and no paid plan is built yet [1].

Eartec for safety compliance officers

Eartec says both its EPak and PRO16 systems let up to 16 users connect and communicate at the same time on one setup [2]. Eartec says customers can add more crew members to a system at any time [2]. Eartec says that if a customer chooses Expedited shipping and returns the set, the shipping fee is deducted from the refund [2]. Before planning a crew budget, the officer should ask Eartec what its headsets cost for the crew size.

Setcom for safety compliance officers

Setcom says its fixed mobile radio system uses one base station to connect up to seven wireless headsets [3]. Setcom describes its LiberatorMAX system as a wireless solution for work teams of two or more people [3]. The officer should also ask Setcom what the system costs for that crew size.

Crewplex for safety compliance officers

CrewPlex says it has provided communication solutions to teams and crews of all sizes across many industries for more than 30 years [4]. CrewPlex describes its large system as scalable full-duplex hands-free communication [4]. CrewPlex says it offers a full range of headset options that fit a variety of jobs and applications [4]. Ask CrewPlex how its systems are set up on a given site, since this page does not cover setup.

Sensear for safety compliance officers

Sensear says its Smart Headsets let workers talk face to face in noise levels up to 95 dB(A), and over two-way radio and Bluetooth on mobile phones in noise levels up to 120 dB(A) [5]. The company says its patented SENS Technology enhances speech while suppressing background noise [5]. Its Charge Racks can accommodate up to 45 headsets for large-scale operations and 6 headsets for smaller-scale needs [5]. For a safety compliance officer, those noise figures are a starting point, and the officer should compare them with the noise on the site itself. How the racks are used and charged on site is not covered here, so the officer should ask the company.

Matching the tool to the job

A safety compliance officer can check how stop signals reach the whole crew. OperatorLink's STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1], and HOLD and SLOW stay on until the last person leaves [1]. Setcom says one base station connects up to seven wireless headsets [3]. For a larger crew, Eartec says up to 16 users can connect and communicate at the same time on one setup [2]. Sensear says its Smart Headsets let workers talk face to face in noise levels up to 95 dB(A), and over two-way radio and Bluetooth on mobile phones in noise levels up to 120 dB(A) [5]. Where the crew is a large one, CrewPlex describes its large system as scalable full-duplex hands-free communication, which means people can talk and listen at the same time without taking turns [4]. It runs in a phone browser with no app install [1].

Questions to ask before you choose

Does a stop reach every headset or phone at once, and does it clear by itself or stay on until someone clears it? How many people can join one setup, and what changes when the crew grows? What does each vendor publish about price, and what does a trial or return cost? What happens to a signal when a headset or phone loses connection for a few seconds? Can the record of who received a signal be kept for the officer's file? What would the headsets cost to keep running across several crews over a year? The same questions apply to Silynx, Sonetics, Clear-Com, David Clark Company, INVISIO, OTTO, Sena Industrial and Sordin, which this page does not cover in detail.

Frequently asked questions

Can OperatorLink show a stop to the whole crew?

Yes. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1]. The officer should check how the alert appears on each phone the crew carries before relying on it.

Is OperatorLink free for crane crews?

OperatorLink is currently free to use, and no paid plan is built yet [1]. A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. Ask OperatorLink whether a jobsite with nobody in it is wiped after 3 idle hours before relying on that rule in a site plan.

How many headsets can Setcom connect to one base station?

Setcom says its fixed mobile radio system uses one base station to connect up to seven wireless headsets [3]. Setcom describes its LiberatorMAX system as a wireless solution for work teams of two or more people [3]. For a larger crew, ask Setcom how larger crews can be accommodated, because this page does not cover that.

Does Eartec charge a shipping fee when a headset is returned?

Eartec says that if a customer chooses Expedited shipping and returns the set, the shipping fee is deducted from the refund [2]. Before buying, the officer should read the return conditions on the vendor's page and ask what the full cost would be for the crew.

Can Sensear headsets work in loud crane work?

Sensear says its Smart Headsets let workers communicate face to face in noise levels up to 95 dB(A), and over two-way radio and Bluetooth on mobile phones up to noise levels of 120 dB(A) [5]. Its Charge Racks can accommodate up to 45 headsets for large-scale operations and 6 headsets for smaller-scale needs [5]. The officer should compare those noise figures with the noise readings for the site itself.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Crewplex, crewplex.com/applications/cranes, read 2026-10-08
  5. Sensear, sensear.com, read 2026-10-09

Related comparisons