2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for plant shutdown coordinators in 2026

Compare Eartec, Setcom, Crewplex, Sensear and OperatorLink for plant shutdown coordinators, with users at once, device and price where a source gives them.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

For a plant shutdown, the choice depends on crew size, noise and cost. OperatorLink runs in a phone browser with no app install, and it is free to use, with no paid plan built yet. [1][1] The headset systems below are compared on the facts their sources give.

OptionWhat it isCount statedPrice
OperatorLinkPhone browser with no app install [1]Not publishedFree to use, no paid plan built yet [1]
EartecEPak with Lazer-Pro, or PRO16 with Monarch [2]Up to 16 users at once [2]Not published
SetcomLiberatorMAX wireless headset with System 977 [3]Up to seven wireless headsets on one base station [3]Not published
CrewplexLarge system built on CrewPlex DR10 beltpacks [4]Crews of 6 to 10 [4]Not published
SensearSmart Headsets [5]Charge racks hold up to 45 headsets [5]Not published

What plant shutdown coordinators need from crane communication headsets

Plant shutdown coordinators plan and run the work done while a plant is stopped, and crane lifts are part of that work. They keep crews, contractors and lift timing in step across a site that is busy and loud. A coordinator often stands away from the crane, so a direction given to the operator has to reach the right people quickly and clearly. Crew members wear hard hats and gloves, so a headset has to sit under the hat and stay usable with gloves on. Pumps, compressors and cutting tools make plain speech hard to hear, so clear audio in noise matters. A coordinator also needs to know who has heard a call and who has not. A useful comparison looks at how many people can join at once, what a person must set up before using it, how the system handles noise, and what it costs.

OperatorLink for plant shutdown coordinators

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install. [1] Button presses, chat and voice pass between phones in a browser. [1] It shows STOP, HOLD and SLOW to the jobsite crew. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Eartec for plant shutdown coordinators

Both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [2] The Lazer-Pro headsets carry an IP65 rating, which the source describes as fully dustproof and waterproof. [2] Orders ship within 1-3 business days. [2] A shutdown team should confirm which set suits its crew size and gear before ordering. For current prices, check with Eartec directly.

Setcom for plant shutdown coordinators

The fixed mobile radio system uses one base station to connect up to seven wireless headsets. [3] The System 977 with the LiberatorMAX Wireless Headset supports hands-free, full-duplex communication and integration into mobile radios for communication among more than two workers. [3] There is no console mounting required, no cable runs for intercom components, and no soldering or cable crimping. [3] For current prices, check with Setcom directly.

Crewplex for plant shutdown coordinators

The large system, for crews of 6 to 10, is described as enabling large crews that need scalable full-duplex hands-free communication. [4] CrewPlex says it delivers high-quality audio and range with other key features. [4] CrewPlex says it offers a full range of headset options to fit a variety of jobs and applications. [4] A coordinator with a crew of a different size should check which system applies. For current prices, check with CrewPlex directly.

Sensear for plant shutdown coordinators

Sensear says its Smart Headsets let workers communicate face to face in noise levels up to 95 dB(A), and reach two-way radio and Bluetooth on mobile phones in noise levels up to 120 dB(A). [5] Its charge racks can hold up to 45 headsets for large operations and 6 for smaller ones. [5] A coordinator should check how the headsets sit under a hard hat and how they work with gloves on. For current prices, check with Sensear directly.

Matching the tool to the job

A coordinator who needs one signal to reach a whole crew at once can use OperatorLink's STOP, which releases every held direction on every phone and shows a full-screen alert to everyone else. [1] A coordinator who needs a few headsets on one base station can look at Setcom's system, which connects up to seven wireless headsets. [3] For a larger crew, Crewplex's system for crews of 6 to 10 is described as scalable full-duplex hands-free communication. [4] Sensear's Smart Headsets are described as allowing face-to-face talk in noise levels up to 95 dB(A). [5] Where one setup must carry up to 16 people at once, Eartec's EPak and PRO16 systems each allow that. [2] A coordinator who wants a voice check-in from a phone can run a voice call with OperatorLink, and anyone who joins can take part. [1] Clear-Com's Arcadia Central Station is described as a scalable station that connects wireless and wired intercom user stations. [6]

Questions to ask before you choose

Ask how many people can hear the same call at once, and whether there is a limit for the crew size on the shutdown. Check whether the headset fits under a hard hat and works with gloves on. Ask whether a new contractor can join partway through the shutdown, and what must be set up first. Ask whether the price is per headset, per user, per month, or a one-time cost. Ask whether a call reaches the crew through phones the crew already carries, or needs dedicated radio hardware. Check which signals stay on for everyone until they are cleared, and which clear when a person lets go. Ask how the system copes with weak signal in the parts of the plant where the crew works. Silynx and Sonetics have no facts in the sources used for this page, so check their current product pages directly before you compare them.

Frequently asked questions

Can Eartec headsets connect a whole crew at once?

Both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [2] The Lazer-Pro headsets carry an IP65 rating, which the source describes as fully dustproof and waterproof. [2] Orders ship within 1-3 business days. [2] A shutdown team should confirm which set suits its crew size and gear before ordering, and ask Eartec for current prices.

Does OperatorLink need an app install for a plant shutdown crew?

No app install is needed, because OperatorLink runs in a phone browser. [1] Button presses, chat and voice pass between phones in a browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1]

How much does OperatorLink cost for a plant shutdown crew?

OperatorLink is currently free to use, and no paid plan is built yet. [1] For the headset systems on this page, ask each maker for a current quote before you compare costs. Compare the full cost of each system, including every headset and base station, once you have the quotes.

Can OperatorLink show a STOP signal to the whole crew?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] On Android browsers, signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [1]

Which headset system does Crewplex offer for a large crew?

The large system, for crews of 6 to 10, is described as enabling large crews that need scalable full-duplex hands-free communication. [4] CrewPlex says it delivers high-quality audio and range with other key features. [4] CrewPlex says it offers a full range of headset options to fit a variety of jobs and applications. [4] Check whether a hard hat option suits the crew before ordering.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Crewplex, crewplex.com/applications/cranes, read 2026-10-08
  5. Sensear, sensear.com, read 2026-10-09
  6. Clear-Com, clearcom.com/products/wireless, read 2026-10-09

Related comparisons