Crane communication headsets for mobile crane operators
Compare crane communication headsets and a phone-based crew option for mobile crane operators, with what each one offers and what to ask.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
A mobile crane operator usually needs hands-free talk from the cab, and the crew needs signals it can see on every phone. OperatorLink shows STOP, HOLD and SLOW on phones in a browser, so it suits a crew that already carries phones [1]. For cab headsets, the table below sets out each option's connection and what its source states.
| Option | Up-front cost | Monthly cost | Hardware and users |
|---|---|---|---|
| OperatorLink | Free to use; no paid plan built yet [1] | No paid plan built yet [1] | Runs in a phone browser with no app install [1] |
| Eartec | Not published | Not published | Two Crane and Lift systems, EPak with Lazer-Pro and PRO16 with Monarch [2]; each allows up to 16 users on one setup [2] |
| Setcom | Not published | Not published | One base station connects up to seven wireless headsets [3] |
| Crewplex | Not published | Not published | Scales from small crews to large crews [4]; large system for large crews [4] |
| Sensear | Not published | Not published | Smart Headsets for face-to-face talk in noise up to 95 dB(A) [5] |
What mobile crane operators need from crane communication headsets
A mobile crane operator sits in the cab and works the controls with both hands, so the operator needs to talk to the crew without reaching for a handset. The signal person and rigger are usually outside the cab, often beside or behind the load, where the operator cannot see them clearly. The engine, wind, and moving machinery make a cab loud, so the operator needs a headset that keeps speech clear over that noise. A headset also has to stay comfortable under a hard hat for a full shift, and it has to work with gloves on. Crews often run more than one job at once, such as a lift and a rigging change, so the operator may need to hear one group without being pulled into another. Before choosing, a crew should compare how each headset connects to the rest of the crew, how many people can join, how it handles loud sounds, and what the crew already carries. Check each product's own details, because the answers differ by system.
OperatorLink for mobile crane operators
OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install. [1] It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it, and the link stops working 12 hours after the first person joins. [1][1] It is a phone tool for the crew's signals, so an operator who needs hands-free talk in the cab should also compare the headset options below. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]
Eartec for mobile crane operators
Eartec's Expedited shipping fee is deducted from a refund if the set is returned, while Free Ground Shipping avoids that fee. [2] Its Lazer-Pro headset uses bone conduction and links to the radio by Bluetooth without wires. [2] Orders ship within 1-3 business days. [2] Ask Eartec which system suits a crane cab and how its crew size works.
Setcom for mobile crane operators
Setcom says its LiberatorMAX system needs no console mounting, no cable runs for intercom components, and no soldering or cable crimping. [3] The system uses one base station to connect up to seven wireless headsets. [3] Setcom describes the System 977 with the LiberatorMAX headset as offering hands-free, full duplex, and integration into mobile radios. [3]
Crewplex for mobile crane operators
Crewplex says it delivers high-quality audio and excellent range while not breaking the budget. [4] Its products are backed by a two-year warranty. [4] The company says it has provided communication solutions for more than 30 years. [4] Ask Crewplex which headset and beltpack a cab would use, and how that choice scales from a small crew to a large one.
Sensear for mobile crane operators
Sensear's patented SENS Technology enhances speech while suppressing background noise. [5] Its Smart Headsets let workers talk face to face in noise levels up to 95 dB(A), and through two-way radio and Bluetooth on mobile phones up to 120 dB(A). [5]
Matching the tool to the job
An operator who needs to talk to the crew from the cab without holding a handset is matched to a headset system. For a crew that wants fewer cables, Setcom says its LiberatorMAX system needs no console mounting and no cable runs for intercom components. [3] A crew with several people in range can use Setcom's system, which requires only one base station to connect up to seven wireless headsets. [3] A crew that works in loud conditions may compare Sensear's figure of up to 95 dB(A) for face-to-face talk. [5] A crew whose signal person and riggers already carry phones can use OperatorLink, which shows STOP, HOLD and SLOW to the jobsite crew. [1] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [1] A crew that wants to weigh cost against audio can note that Crewplex says it delivers high-quality audio and excellent range. [4]
Questions to ask before you choose
Does the headset keep speech clear over the engine and wind in your cab? Can it be worn under a hard hat and with gloves for a full shift? How many crew members can join one channel, and what happens when someone new joins? Does the system connect to the radio the crew already uses? Is the price per user, per headset, or per base station, and does it change on an annual plan? How long is the warranty, and who handles repairs? If the crew signals by phone, what happens to a signal when a phone loses connection for a few seconds? Which phones can the crew use, and does anyone need to install something first? Can the system run more than one group, so the lift crew and the rigging crew do not talk over each other?
Frequently asked questions
Is OperatorLink free for mobile crane operators?
OperatorLink is currently free to use, and no paid plan is built yet. [1] It runs in a phone browser with no app install, so a crew can start without downloading anything. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins. [1] Check that every phone on the crew can open a browser before relying on it.
Does OperatorLink pass voice and button presses between phones?
OperatorLink passes button presses, chat and voice between phones in a phone browser. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] A crane operator who needs hands-free talk from the cab should compare the headset systems in the table.
Is CrewPlex covered by a warranty?
CrewPlex products are backed by a two-year warranty. [4] The company says it has provided communication solutions for more than 30 years. [4] Ask CrewPlex what the warranty covers, how long it runs in practice, and whether it applies to every item a crew would buy. Compare those terms with the warranty terms from other sellers before deciding.
Does Setcom need cable runs for its wireless headsets?
Setcom says its LiberatorMAX system needs no console mounting, no cable runs for intercom components, and no soldering or cable crimping. [3] It requires only one base station to connect up to seven wireless headsets. [3] Ask Setcom how the base station is powered and mounted in a crane cab before planning the install.
How loud a cab can Sensear headsets handle?
Sensear says its Smart Headsets let workers talk face to face in noise levels up to 95 dB(A). [5] The same source says two-way radio and Bluetooth on mobile phones work up to noise levels of 120 dB(A). [5] Ask Sensear how those figures were measured and whether they apply to a crane cab, since a cab's noise can differ from the test conditions behind a published figure.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- Crane communication headsets compared
- Crane communication headsets for aircraft recovery crews
- Crane communication headsets for amusement ride installers
- Crane communication headsets for apprentice riggers in 2026
- Crane communication headsets for boom truck operators
- Crane communication headsets for bridge construction crews
- Crane communication headsets for bridge crews
- Crane communication headsets for bulk material handlers
- Crane communication headsets for concrete pump operators
- Crane communication headsets for foremen in 2026