2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for ironworkers in 2026

Crane communication headsets for ironworkers compared: Eartec, Setcom, Crewplex, Sensear and OperatorLink, with the facts each side publishes.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Ironworkers on a crane job can compare several headset systems, and the right pick depends on crew size, noise, and whether the headset must link to a radio or phone. Eartec lists two crane and lift headset systems that allow up to 16 users on one setup [1][1]. OperatorLink is not a headset; it runs in a phone browser with no app install [2] and is currently free to use, with no paid plan built yet [2].

OptionWhat it isPriceCrew size and reach
OperatorLinkRuns in a phone browser, not as a headset; passes STOP, HOLD and SLOW, button presses, chat and voice [2]Free to use; no paid plan built yet [2]Crew joins from a shared link or QR code; the link works for 12 hours after the first person joins [2][2]
EartecTwo Eartec systems: EPak with Lazer-Pro and PRO16 with Monarch [1]Not publishedUp to 16 users on the same setup [1]
SetcomLiberatorMAX wireless headset with the System 977, with integration into mobile radios [3]Not published; described as its least costly wireless solution for work teams of two or more [3]One base station connects up to seven wireless headsets [3]
CrewplexFull-duplex, hands-free communication that can be integrated with mobile two-way communications [4]Not published [4]Scales from small crews to large crews, with optional two-way radio integration for multi-site communication [4]
SensearSensear says its Smart Headsets support face-to-face communication in noise levels up to 95 dB(A), and two-way radio and Bluetooth communication on mobile phones in noise levels up to 120 dB(A). [5]Not publishedA charge rack can accommodate up to 45 headsets for large-scale operations [5]

What ironworkers need from crane communication headsets

Ironworkers on a crane job often work high on steel, move around the load, and depend on a signal person and the operator to understand what is happening around them. Noise from the crane, generators and other trades can make voice hard to hear, so a headset has to keep speech clear without shutting out the rest of the site. Hands and balance matter too, since a headset that sits badly or pulls at the ear becomes a distraction while climbing or hooking on. Some crews need a short talk line between a few people, while others need one system that reaches a whole crew across a wide area. Hands-free operation is a basic requirement, because the work itself keeps both hands busy. A crew should weigh how many people must share one channel, how loud the site is, whether the headset must link to a radio or phone, and how it is worn with a hard hat and hearing protection.

OperatorLink for ironworkers

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install, so the crew uses its phones rather than a headset. [2] It can also be added to a phone's home screen as a standalone app. [2] It passes button presses, chat and voice between phones in a browser. [2] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [2] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [2] Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, they drop it. [2] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [2] Anyone who joins can take part in a voice call run from the phone browser. [2] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [2] A jobsite link stops working 12 hours after the first person joins it, and an empty jobsite is wiped after 3 idle hours. [2][2] OperatorLink is currently free to use, and no paid plan is built yet. [2]

Eartec for ironworkers

Eartec states that both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [1] All Eartec headsets feature noise-canceling microphone technology that filters out background machinery noise. [1] The Lazer-Pro headset links to the radio by Bluetooth, without wires or cables. [1] Ask Eartec for a quote before comparing costs with the other options. Ask how the headset sits under a hard hat and how it is worn during climbing.

Setcom for ironworkers

Setcom says a crew talks by turning its headsets to the same channel. [3] The company's business address is 3019 Alvin DeVane Blvd., Suite 560, Austin, TX 78741. [3] Does Setcom require the crew to select a channel number before using the headsets? Ask Setcom which systems it offers for a crew of your size and what each one costs.

Crewplex for ironworkers

CrewPlex says it provides full-duplex, hands-free communications that can be integrated with mobile two-way communications. [4] The large system is described as scalable full-duplex hands-free communication for a crew of 6 to 10. [4] The company says it has provided communication solutions for more than 30 years. [4] Ask CrewPlex how the headset fits under a hard hat and whether the crew size you need falls within the system's range.

Sensear for ironworkers

Sensear's Smart Headsets let workers communicate face-to-face in noise levels up to 95 dB(A), and over two-way radio and Bluetooth on mobile phones in noise levels up to 120 dB(A). [5] Its patented SENS Technology enhances speech while suppressing background noise. [5] A charge rack can accommodate up to 45 headsets for large-scale operations and 6 headsets for smaller needs. [5] Check the noise levels on your own site against these figures before choosing.

Matching the tool to the job

Eartec states that its systems allow up to 16 users to connect and communicate on the same setup. [1] For a crew of six to ten, Crewplex describes its large system as scalable full-duplex hands-free communication. [4] Where talk has to cut through heavy noise, Sensear states that its headsets work in noise levels up to 95 dB(A) for face-to-face talk. [5] Eartec's microphones filter out background machinery noise, which matters where equipment is running. [1] Setcom says a crew can talk by turning its headsets to the same channel. [3] For direction signals such as STOP, HOLD and SLOW, OperatorLink shows them to the jobsite crew, and HOLD and SLOW stay on until the last person leaves. [2][2] A crew that wants both hands-free speech and direction signals would ask each maker how the tools work side by side before buying.

Questions to ask before you choose

How many people need to talk on one channel, and does the crew expect to grow? How loud is the site at the points where the crew hooks on and guides the load? Does the headset need to link to a radio or a phone, and which devices does the crew already carry? How does the headset sit with a hard hat and hearing protection during climbing? For a short job, is a shared link or QR code enough to get the crew talking, and what happens when the link expires? Is the price per user, per headset, or per month, and does it change on an annual plan? What does the warranty cover, and who handles repairs on site?

Frequently asked questions

Is OperatorLink a crane communication headset?

OperatorLink is not a headset; it runs in a phone browser with no app install, so the crew uses its phones instead. [2] It passes button presses, chat and voice between phones in a browser. [2] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [2] Does the crew need a separate headset for hands-free speech while using OperatorLink for direction signals?

Is OperatorLink free for ironworkers?

OperatorLink is currently free to use, and no paid plan is built yet. [2] A jobsite link stops working 12 hours after the first person joins it. [2] A jobsite with nobody in it is wiped after 3 idle hours. [2] A crew planning a longer job should check the current status of the tool before relying on it for the whole job.

How many users can Eartec connect on one crane headset setup?

Eartec states that both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [1] All Eartec headsets feature noise-canceling microphone technology that filters out background machinery noise. [1] Ask Eartec for a quote and confirm that the setup matches the crew size before ordering.

Does the Sensear headset work in loud noise?

Sensear says its Smart Headsets let workers communicate face-to-face in noise levels up to 95 dB(A), and over two-way radio and Bluetooth on mobile phones in noise levels up to 120 dB(A). [5] Its patented SENS Technology enhances speech while suppressing background noise. [5] Check the noise levels on your own site against these figures, and ask how the headset sits under a hard hat before choosing.

Can OperatorLink be used alongside Setcom on the same crane crew?

OperatorLink passes STOP, HOLD and SLOW to phones in a browser, along with button presses, chat and voice. [2] Setcom says a crew talks by turning its headsets to the same channel. [3] Ask each maker how its tool works with other gear on the same crew, including channels, devices and how each is worn, before combining them.

OperatorLink is currently free to use, and no paid plan is built yet. [2]

Try OperatorLink

Sources

  1. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  2. OperatorLink's own description of itself (the product of this site's publisher)
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Crewplex, crewplex.com/applications/cranes, read 2026-10-08
  5. Sensear, sensear.com, read 2026-10-09

Related comparisons