2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for industrial plant riggers in 2026

Compare crane communication headsets for industrial plant riggers, from Eartec and Setcom to Sensear and Sena Industrial, plus OperatorLink for crew signals.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

OperatorLink is a phone browser tool that shows STOP, HOLD and SLOW to a jobsite crew and passes voice between phones [1], and it is currently free to use [1]. Headsets from Eartec, Setcom, Sensear and Sena Industrial are compared below by noise handling, how many people can join, and what each vendor says its product does. Prices for those four are not published on this page.

OptionWhat it isPriceNoise or range
OperatorLinkPhone browser tool that shows STOP, HOLD and SLOW to the crew, with no app install [1]Free; no paid plan built yet [1]Passes button presses, chat and voice between phones in a browser [1]
EartecCrane and Lift systems: EPak with Lazer-Pro, and PRO16 with Monarch [2]Not publishedUp to 16 users on one setup [2]
SetcomLiberatorMAX wireless headset with System 977, which supports hands-free, full duplex, and integration into mobile radios for communication among more than two workers [3]Not publishedUp to seven wireless headsets per base station [3]
SensearSmart Headsets for face-to-face talk in high noiseNot publishedFace-to-face talk in noise levels up to 95 dB(A) [4]
Sena IndustrialMesh Intercom headsets, including hardhat integrated models [5]Not publishedBluetooth and Mesh Intercom for loud, busy worksites [5]

What industrial plant riggers need from crane communication headsets

Industrial plant riggers attach loads, guide them past machinery and pipework, and often work where the crane operator cannot see them. Plant noise from compressors, conveyors and other equipment can drown out a voice, so a headset has to be heard clearly over it. Riggers usually wear hard hats and gloves, which makes small controls and fiddly setup steps a poor fit for a busy lift. Some plants need the whole crew on one channel, while others have the operator and the signal person on separate radios. OperatorLink's HOLD and SLOW stay on for everyone on the jobsite until the last person leaves [1]. Compare how each option handles noise, how many people can join, what each person must set up before a lift, and what the option costs.

OperatorLink for industrial plant riggers

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install needed [1], and it can be added to a phone's home screen as a standalone app [1]. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone until the last person leaves [1]. One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages [1]. The person who starts a jobsite shares a link or QR code that the crew joins from [1], and that link stops working 12 hours after the first person joins [1]. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz [1]. OperatorLink is currently free to use, and no paid plan is built yet [1].

Eartec for industrial plant riggers

Eartec offers two Crane and Lift headset systems: EPak with Lazer-Pro, and PRO16 with Monarch [2]. Both the EPak and PRO16 systems allow up to 16 users to connect and communicate at once on the same setup [2]. The Lazer-Pro headsets carry an IP65 certification for dust and water resistance [2]. Orders ship within 1 to 3 business days [2]. Eartec's prices are not published on this page, so ask Eartec for current pricing before comparing it with the others.

Setcom for industrial plant riggers

Setcom's LiberatorMAX system needs one base station to connect up to seven wireless headsets [3]. The LiberatorMAX system requires no console mounting, no intercom cable runs, and no soldering or cable crimping [3]. Setcom's prices are not published on this page, so ask Setcom for current pricing and how it handles groups of more than seven.

Sensear for industrial plant riggers

Sensear's Smart Headsets let workers talk face to face in noise levels up to 95 dB(A) [4]. Its Charge Racks can hold up to 45 headsets for large-scale operations and 6 for smaller ones [4]. Sensear's prices are not published on this page, so check them with Sensear before a purchase.

Sena Industrial for industrial plant riggers

Sena's hearing protection products feature Bluetooth and Mesh Intercom technologies that let workers communicate in loud, busy worksites [5]. Its hearing protection headsets offer noise reduction, over-the-head earmuffs, and hardhat integrated headsets [5]. The Sena Expand Mesh is a compact communication headset with Mesh Intercom technology for easy group communication [5]. Sena's prices are not published on this page, so ask Sena for current pricing.

Matching the tool to the job

A rigger who needs the whole crew to hold a stop until everyone sees it can use OperatorLink, whose STOP, HOLD and SLOW stay on until the last person leaves [1]. A rigger in a loud plant who needs to hear the operator clearly can compare Sensear's noise level of up to 95 dB(A) [4] with Sena's Mesh Intercom headsets for loud worksites [5]. A rigger who wears a hard hat on the lift can look at Sena's hardhat integrated headsets [5]. A crew of up to seven can share one Setcom base station [3], while Eartec's EPak and PRO16 setups allow up to 16 users [2]. A rigger who needs hearing protection in very high noise can read about INVISIO's RA4000, described as ultimate hearing protection in high-noise environments [6]. For wireless talk, Clear-Com describes its wireless systems as offering hands-free, full-duplex communication [7].

Questions to ask before you choose

Does the crew need a halt that stays on every screen until each person has seen it, or is a single spoken call enough? Are the crew's phones iPhones or Android devices, since alert buzzing differs by browser? How many people must share one channel, and does the option handle that count on one setup? How loud is the plant at the spot where the lift happens, and what noise rating does each headset state? Does each person have to set up a pairing or channel before a lift, and how long does that take? Who pays, and is the price per headset, per user or per crew? Silynx and Sonetics are not described on this page, so ask each one directly about devices, noise handling and price.

Frequently asked questions

Which crane communication headsets suit loud industrial plants?

Sensear's Smart Headsets are described as letting workers talk face to face in noise levels up to 95 dB(A) [4]. Sena's hearing protection products feature Bluetooth and Mesh Intercom technologies for loud, busy worksites [5]. INVISIO's RA4000 is described as ultimate hearing protection in high-noise environments [6]. Prices for these headsets are not published on this page, so check each vendor before buying.

Is OperatorLink free for industrial plant riggers?

OperatorLink is currently free to use, and no paid plan is built yet [1]. It runs in a phone browser with no app install needed [1], and the crew can join from a shared link or QR code [1]. Check that every phone in the crew works in its browser before a lift starts.

How long does an OperatorLink jobsite link stay usable?

A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. A jobsite link stops working 12 hours after the first person joins, so plan the link around the shift. [1]

Can Sena Industrial headsets be worn with a hard hat?

Sena's hearing protection headsets offer noise reduction, over-the-head earmuffs, and hardhat integrated headsets [5]. The Sena Expand Mesh is a compact communication headset with Mesh Intercom technology [5]. Before ordering, ask Sena which model fits a hard hat and how it attaches to the hat.

Does Setcom's LiberatorMAX connect a whole rigging crew?

The fixed mobile radio system uses one base station to connect up to seven wireless headsets [3]. The LiberatorMAX system requires no console mounting, no intercom cable runs, and no soldering or cable crimping [3]. For a crew larger than seven, ask Setcom how it handles more headsets before deciding.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Sensear, sensear.com, read 2026-10-09
  5. Sena Industrial, senaindustrial.com, read 2026-10-10
  6. INVISIO, invisio.com, read 2026-10-09
  7. Clear-Com, clearcom.com/products/wireless, read 2026-10-09

Related comparisons