2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for hoist operators in 2026

Compares crane communication headsets for hoist operators, with the job's needs, five options and their published facts, and questions to ask first.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

A hoist operator needs to hear a signal person over noise, talk back without taking hands off the controls, and reach the whole crew. The options below differ on those points, and each section says only what its maker publishes.

OptionTalk and hearingCrew and joiningPrice
OperatorLinkButton presses, chat and voice between phones in a browser [1]Crew joins from a shared link or QR code [1]Free to use; no paid plan built yet [1]
EartecLazer-Pro headset links to the radio by Bluetooth without wires [2]Up to 16 users on the same setup [2]Not published
SetcomHands-free talk and listening at once, with integration into mobile radios [3]One base station connects up to seven wireless headsets [3]Not published
CrewplexFull range of headset options [4]Small to large crews; large setup described for crews of 6 to 10 [4][4]Not published
SensearFace-to-face talk in noise up to 95 dB(A); speech enhanced while background noise is suppressed [5][5]Charging stands hold up to 45 headsets for large operations [5]Not published

What hoist operators need from crane communication headsets

A hoist operator runs the hoist from a cab or control station and often cannot see the whole load or the path it travels. Someone on the ground, usually a signal person or a rigger, calls the moves, and the operator has to hear them over engine noise, the hoist itself and wind. Both hands stay on the controls, so talk that works hands-free matters more than a handset held to the ear. Loud machinery often calls for hearing protection, so a headset that lets the operator hear a voice through that protection is worth checking. Some lifts happen high up or in tight spaces, where running a cord can be awkward. The crew also needs to answer the operator quickly, with short replies rather than long exchanges. Before comparing options, write down where the operator sits, how far the crew stands away, how many people must hear each call, and how loud the hoist runs.

OperatorLink for hoist operators

OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install, and it passes button presses, chat and voice between phones in a browser. [1][1] It shows STOP, HOLD and SLOW to the jobsite crew, so a hoist operator with a phone sees the same directions as the rest of the crew. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone until the last person leaves. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] Anyone who joins can take part in a voice call run from the phone browser. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Eartec for hoist operators

Eartec's Lazer-Pro headset links to the radio by Bluetooth without wires. [2] The Lazer-Pro headsets are rated IP65 for dust and water resistance. [2] Eartec says orders ship within 1 to 3 business days. [2] A hoist operator who wears hearing protection or a hard hat can check how the headset sits with that gear before ordering. Ask Eartec for its prices before comparing.

Setcom for hoist operators

Setcom describes its LiberatorMAX system as its least costly wireless solution for work teams of two or more people. [3] The company says buyers receive reliability and a focus on quality. [3] A hoist operator should ask how the headset connects to the crew's radio and how many headsets the setup supports before ordering. Ask Setcom for its price before comparing.

Crewplex for hoist operators

Crewplex says it can be scaled from small crews to large crews, and it offers optional integration with two-way radios for multi-site communication. [4] Its large setup is described for crews of 6 to 10 and offers scalable hands-free talk. [4] The company says it offers a full range of headset options. [4] Ask Crewplex how many headsets its smaller setups hold.

Sensear for hoist operators

Sensear says its patented technology enhances speech while suppressing background noise. [5] Its headsets allow face-to-face talk in noise levels up to 95 dB(A), and two-way radio and Bluetooth on mobile phones up to 120 dB(A). [5] Its charging stands hold up to 45 headsets for large operations and 6 for smaller ones. [5] Ask Sensear how those noise figures were measured before comparing them with the noise on your site.

Matching the tool to the job

For hearing a signal person over engine and hoist noise, Sensear is one option to compare. Its technology is described as suppressing background noise, and its headsets allow face-to-face talk in noise levels up to 95 dB(A). [5][5] A hoist operator who needs to talk back without wires can compare Eartec's Lazer-Pro, which links to the radio by Bluetooth. [2] A crew that changes size can compare Crewplex, which says it scales from small crews to large ones. [4] Stopping a lift at once is what OperatorLink's STOP does: it releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] A small crew on a tight budget can ask Setcom about its LiberatorMAX system, which the company describes as its least costly wireless solution for teams of two or more. [3]

Questions to ask before you choose

Does the operator need to talk and listen at once while both hands stay on the controls? Does the headset work with the radio the crew already uses? How far away does the signal person stand, and does the setup reach that far? How many people need to hear the operator's replies, and does the setup cover that many? Does the site require hearing protection, and can the headset be worn with it? Which phones does each crew member carry, and are they the phones the tool runs on? Who pays, and is the price per headset, per user, or per month? Who in the crew may send a STOP, and what happens to a call or a direction if a headset or phone drops out during a lift?

Frequently asked questions

Does OperatorLink work as a crane communication headset?

OperatorLink runs in a phone browser with no app install, and it passes button presses, chat and voice between phones in a browser. [1][1] It shows STOP, HOLD and SLOW to the jobsite crew, and STOP releases every held direction and shows a full-screen alert to everyone else. [1][1] Ask the team that makes OperatorLink how it works alongside a headset before relying on both together.

Can Eartec's Lazer-Pro headset link to a radio without wires?

Yes, according to Eartec. The Lazer-Pro headset links to the radio by Bluetooth without wires. [2] The Lazer-Pro headsets are rated IP65 for dust and water resistance. [2] Eartec says orders ship within 1 to 3 business days. [2] Ask Eartec for its prices and crew limits before comparing, and confirm that the model you order is the one with the link you need.

Can Sensear's headsets be used in loud noise?

Sensear says its headsets let workers talk face to face in noise levels up to 95 dB(A), and that its patented technology enhances speech while suppressing background noise. [5][5] Those figures come from the company's own page. Ask Sensear how the noise levels were measured and what the headset does at your site's noise level before you decide.

What does OperatorLink cost compared with headset makers?

OperatorLink is currently free to use, and no paid plan is built yet. [1] Setcom describes its LiberatorMAX system as its least costly wireless solution for work teams of two or more people, which is a description rather than a price. [3] For Eartec, Setcom, Crewplex and Sensear, ask each maker for its price per headset or per month before comparing.

How many headsets can a Crewplex setup connect?

Crewplex says it can be scaled from small crews to large crews, with optional integration with two-way radios for multi-site communication. [4] Its large setup is described for crews of 6 to 10 and offers scalable hands-free talk. [4] Ask Crewplex how many headsets its smaller setups hold, and confirm that the large setup covers the number of people on your hoist crew before ordering.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Crewplex, crewplex.com/applications/cranes, read 2026-10-08
  5. Sensear, sensear.com, read 2026-10-09

Related comparisons