2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for culvert and pipe installers in 2026

Compare Eartec, Setcom, CrewPlex, Sensear, OperatorLink and more for crane crews on culvert and pipe jobs. Fees, devices and fit.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

Culvert and pipe installers work in tight, noisy spaces where a missed call can stop a lift. This page compares Eartec, Setcom, CrewPlex, Sensear, and OperatorLink on noise handling, range, crew size, and price, so a crew can match a tool to the job.

OptionUp-front costMonthly costDevice and join
OperatorLinkFree, no paid plan built yet [1]Free [1]Phone browser, no app install; crew joins from a shared link or QR code [1][1]
EartecNot publishedNot publishedEPak and PRO16 systems, up to 16 users on the same setup [2]
SetcomNot publishedNot publishedOne base station connects up to seven wireless headsets [3]
CrewPlexNot publishedNot publishedDR10 beltpacks for large crews, full-duplex hands-free [4]
SensearNot publishedNot publishedSmart Headsets, face-to-face up to 95 dB(A), radio and Bluetooth up to 120 dB(A) [5]
Sena IndustrialNot publishedNot publishedHearing protection headsets with Bluetooth and Mesh Intercom [6]
SordinSupreme Pro-X from 3 499 kr [7]Not publishedSupreme T2 at 8 295 kr [7]
INVISIONot publishedNot publishedRA4000 headset for high-noise environments [8]
David Clark CompanyNot publishedNot publishedWireless systems for aviation, military, and two-way radio markets [9]
Clear-ComNot publishedNot publishedHelixNet Digital Partyline, deployable on different cabling infrastructures [10]
OTTONot publishedNot publishedTwo-way radio communications accessories, USA manufacturing [11][11]
SilynxNot publishedNot publishedNot published
SoneticsNot publishedNot publishedNot published

What culvert and pipe installers need from crane communication headsets

Culvert and pipe installers set large pipe sections and culverts, often in trenches or beside open water. A crane lifts each section, and a signal person calls the move while riggers guide the load into place. The crew works close to the load and can lose sight of one another inside a trench or behind a pipe. A missed call can stop a lift mid-swing. The tools they need carry clear voice through the noise of the site and keep a direction steady until every person on the crew has registered it. Crew members keep gloves on and eyes on the load, so the tool needs clear audio and a simple way to talk. A crew should compare how each tool handles site noise, how far it reaches, how many people it covers, what each person must do to get started, and whether the tool reaches the parts of the site where the crew works.

Eartec for culvert and pipe installers

Eartec offers two Crane and Lift headset systems: EPak with Lazer-Pro, and PRO16 with Monarch. [2] Both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [2] All Eartec headsets include noise-canceling microphone technology to filter out background machinery noise. [2] Customers can buy a set, try it, and return it for a full refund if they do not like it. [2] Eartec items must be returned undamaged within 30 calendar days of receipt to qualify for the refund. [2]

Setcom for culvert and pipe installers

The LiberatorMAX system is up and running 30 seconds after opening the box and provides full-duplex communication without push-to-talk. [3] The fixed mobile radio system uses one base station to connect up to seven wireless headsets. [3] The System 977 with the LiberatorMAX Wireless Headset supports hands-free, full duplex, and integration into mobile radios for communication among more than two workers. [3] The company's business address is 3019 Alvin DeVane Blvd., Suite 560, Austin, TX 78741. [3]

CrewPlex for culvert and pipe installers

The large system is built on CrewPlex DR10 beltpacks and is described as enabling large crews that need scalable full-duplex hands-free communication (6-10). [4] The company says it has provided communication solutions for more than 30 years. [4] CrewPlex says it delivers high-quality audio and excellent range without breaking the budget. [4]

Sensear for culvert and pipe installers

Sensear's Smart Headsets let workers communicate face-to-face in noise levels up to 95 dB(A) and via two-way radio and Bluetooth on mobile phones up to 120 dB(A). [5] Sensear's patented SENS Technology enhances speech while suppressing background noise. [5] Sensear's Charge Racks can accommodate up to 45 headsets for large-scale operations and 6 headsets for smaller-scale needs. [5]

OperatorLink for culvert and pipe installers

OperatorLink is made by the team that publishes this site. It runs in a phone browser, so no app install is needed. [1] It passes button presses, chat and voice between phones in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Matching the tool to the job

A crew that needs clear voice through heavy site noise can look at Eartec, whose headsets include noise-canceling microphone technology. [2] A crew that wants to be up and running fast can look at Setcom, whose LiberatorMAX system is up and running 30 seconds after opening the box. [3] A crew of six to ten that needs hands-free communication can look at CrewPlex, whose large system is built on DR10 beltpacks. [4] A crew working in very loud conditions can look at Sensear, whose Smart Headsets let workers communicate face-to-face in noise levels up to 95 dB(A). [5] A signal person who needs a direction to stay visible until every person registers it can use OperatorLink, which keeps STOP, HOLD and SLOW on for everyone until the last person leaves. [1] A rigger who needs to check in without typing can use OperatorLink's one-tap radio-style calls. [1] For a short job, OperatorLink shares a link or QR code the crew joins from, and the link works for 12 hours. [1][1]

Questions to ask before you choose

Does the headset handle the noise level on the site, and how far does it reach? How many people can one system cover, and does the crew need more than that? What does each person have to do to get started, and how long does setup take? Is the price per headset, per user, or per month, and does it change on an annual plan? How long does a free trial run, and what must be shared to start one? If a lone rigger needs an alarm, does the tool have one, and who does it reach? Can the tool run more than one group at once so the signal crew and the rigging crew do not talk over each other? Does the headset work with the phones or radios the crew already carries?

Frequently asked questions

Do crane communication headsets work for culvert and pipe installers?

A headset carries voice through site noise, and some also pass direction signals. Eartec headsets include noise-canceling microphone technology to filter out background machinery noise. [2] Sensear's Smart Headsets let workers communicate face-to-face in noise levels up to 95 dB(A). [5] OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser, and HOLD and SLOW stay on until the last person leaves. [1][1] Ask each provider how far its tools reach on the site before relying on one.

Is there a free crane communication tool for a culvert and pipe crew?

Yes. OperatorLink is currently free to use, and no paid plan is built yet. [1] Eartec offers a full refund if a customer returns a set undamaged within 30 calendar days of receipt. [2][2] Setcom's LiberatorMAX system is up and running 30 seconds after opening the box. [3] Compare how long a signal stays visible before relying on any free option.

What does a crane communication headset cost?

Sordin lists the Supreme Pro-X from 3 499 kr and the Supreme T2 at 8 295 kr. [7][7] Eartec, Setcom, CrewPlex, and Sensear pricing is not published here, so ask them what they charge per headset or per user. OperatorLink is currently free, with no paid plan built yet. [1]

Can a signal person hold a STOP that everyone on the crew sees?

Some tools keep a direction visible rather than drop it when a finger lifts. OperatorLink keeps STOP, HOLD and SLOW on for everyone in the jobsite and clears them when the last person leaves, and STOP releases every held direction and shows a full-screen alert to everyone else. [1][1] For other tools, ask how long a direction stays on screen and whether it clears when the person stops holding it.

What device is needed for crane communication on a culvert job?

OperatorLink runs in a phone browser with no app install and can be added to a phone's home screen. [1][1] Eartec's EPak beltpack weighs 2.5 oz and is worn clipped to clothing or tucked inside a pocket. [2] Setcom's system uses one base station to connect up to seven wireless headsets. [3] Check which devices the rest of the crew already carries, and ask each provider what its tool runs on before the crew relies on it.

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Crewplex, crewplex.com/applications/cranes, read 2026-10-08
  5. Sensear, sensear.com, read 2026-10-09
  6. Sena Industrial, senaindustrial.com, read 2026-10-10
  7. Sordin, sordin.com, read 2026-10-16
  8. INVISIO, invisio.com, read 2026-10-09
  9. David Clark Company, davidclark.com, read 2026-10-09
  10. Clear-Com, clearcom.com/products/wireless, read 2026-10-09
  11. OTTO, otto-comm.com, read 2026-10-16

Related comparisons