Crane communication headsets for crane rigging instructors in 2026
Compare OperatorLink, Eartec, Setcom, Sensear and Sena Industrial for crane rigging instructors, with what each one says it does and what to check.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Crane rigging instructors need a way to give direction to a class working near moving loads, and a signal that stays visible until each trainee has seen it. OperatorLink shows STOP, HOLD and SLOW to the crew in a phone browser [1]. The table below lists what each option on this page says it does, with a price only where one is published.
| Option | What it is | Users or reach | Price or fee |
|---|---|---|---|
| OperatorLink | Runs in a phone browser with no app install [1] | Crew joins from a shared link or QR code [1] | Free, no paid plan built yet [1] |
| Eartec | EPak with Lazer-Pro, or PRO16 with Monarch [2] | Up to 16 users on the same setup [2] | Not published |
| Setcom | LiberatorMAX Wireless Headset with System 977 [3] | Up to seven wireless headsets on one base station [3] | Not published |
| Sensear | Smart Headsets for noise up to 95 dB(A) [4] | Up to 45 headsets for large-scale operations, 6 for smaller ones [4] | Not published |
| Sena Industrial | Hearing protection headsets with Bluetooth and Mesh Intercom [5] | Mesh Intercom for easy group communication [5] | Not published |
What crane rigging instructors need from crane communication headsets
Crane rigging instructors teach trainees to rig loads and to give the hand and voice signals a signal person uses. In a training yard, one instructor often has to be heard by a group of trainees standing at different distances, with machinery running nearby. Practice lifts put people close to moving loads, so an instructor needs to stop a lift at once when a trainee makes a mistake. Gloves stay on and eyes stay on the load, so the gear needs large controls and clear alerts rather than a small screen to read. Instructors also need a signal to stay visible until every trainee has seen it, not disappear when the speaker lets go. Sessions often run both in the yard and in a classroom, so a buyer should check whether the gear works in both places. The right choice depends on how many trainees wear a unit, how far apart they stand, and whether the instructor must listen to a radio at the same time.
OperatorLink for crane rigging instructors
OperatorLink is made by the team that publishes this site. It runs in a phone browser with no app install [1], and button presses, chat and voice pass between phones in a browser [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite until the last person leaves [1]. A crew joins from a link or QR code that the person who starts the jobsite shares [1], and the link stops working 12 hours after the first person joins [1]. OperatorLink is currently free to use, and no paid plan is built yet [1].
Eartec for crane rigging instructors
Eartec offers two Crane and Lift headset systems, EPak with Lazer-Pro and PRO16 with Monarch [2]. Both the EPak and PRO16 systems allow up to 16 users to connect and communicate at the same time on the same setup [2]. Users can add more crew members at any time [2]. The EPak beltpack weighs 2.5 oz and is worn clipped to clothing or tucked inside a pocket [2]. The Lazer-Pro headset links to the radio by Bluetooth, which removes wires and cables [2]. Eartec says a customer can buy a set, try it, and receive a full refund if they return it under its return guidelines [2]. Check the return terms with Eartec before ordering.
Setcom for crane rigging instructors
Setcom's LiberatorMAX Wireless Headset works with its System 977, which the company lists with hands-free operation, full-duplex communication and integration into mobile radios [3]. Setcom describes the LiberatorMAX as its least costly wireless solution for work teams of two or more people [3]. The company says its LiberatorMAX system is up and running 30 seconds after opening the box, and that it does not require push-to-talk [3]. Headsets pair by being set to the same channel, with no pairing step [3]. The fixed mobile radio system uses one base station to connect up to seven wireless headsets [3].
Sensear for crane rigging instructors
Sensear says its Smart Headsets let workers talk face to face in noise levels up to 95 dB(A), and use two-way radio and Bluetooth on mobile phones in noise up to 120 dB(A) [4]. The company describes its patented SENS Technology as enhancing speech while suppressing background noise [4]. Up to 45 headsets for large-scale operations and 6 for smaller ones [4].
Sena Industrial for crane rigging instructors
Sena says its hearing protection line features Bluetooth and Mesh Intercom technologies, which allow workers to communicate in loud, busy worksites [5]. The Sena Expand Mesh is a compact communication headset with Mesh Intercom technology for easy group communication [5]. Sena's headset range includes noise reduction, over-the-head earmuffs and hardhat integrated headsets [5].
Matching the tool to the job
HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. The Setcom LiberatorMAX with System 977 offers hands-free, full duplex, and integration into mobile radios [3]. Sensear says its Smart Headsets let workers communicate face-to-face in noise levels up to 95 dB(A) [4]. If the class is larger and needs one setup, Eartec's EPak and PRO16 systems each allow up to 16 users on the same setup [2]. If the instructors wear hard hats, Sena's range includes hardhat integrated headsets [5], and Expand Mesh offers Mesh Intercom for group communication [5]. Crewplex says its system for large crews of six to ten users enables scalable full-duplex hands-free communication [6].
Questions to ask before you choose
Does a direction stay on every screen until each person has seen it, or does it clear when the speaker lets go? Do trainees need to wear a headset, or can they join from a phone they already carry? How many people must hear the instructor at the same time, and how far apart do they stand? Does the system work in the yard and in the classroom, and how is machinery noise handled? Can the instructor split trainees into separate groups for different tasks? What does each option cost per person or per unit, and is that price published? Ask Silynx and Sonetics the same questions, since no facts about either are listed on this page.
Frequently asked questions
Does OperatorLink run on a phone for crane rigging instructors?
Yes. OperatorLink runs in a phone browser with no app install, and button presses, chat and voice pass between phones in a browser [1][1]. A crew joins from a shared link or QR code [1]. STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on until the last person leaves [1]. Check which phones the trainees already carry before relying on it.
Is OperatorLink free for crane rigging instructors?
OperatorLink is currently free to use, and no paid plan is built yet [1]. A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1].
Does Eartec let crane rigging instructors return a headset?
Eartec says a customer can buy a set, try it, and receive a full refund only if the set is returned under its return guidelines [2]. Items must be returned undamaged within 30 calendar days from the date received [2]. If a customer chooses Expedited shipping and returns the set, the shipping fee is deducted from the refund [2]. Check these terms with Eartec before ordering for a full class.
How many users can Eartec connect on one setup?
Both the EPak and PRO16 systems allow up to 16 users to connect and communicate at the same time on the same setup [2]. Users can add more crew members at any time [2]. The EPak beltpack weighs 2.5 oz and is worn clipped to clothing or tucked inside a pocket [2]. Confirm the setup size and pricing with Eartec before buying for a full class of trainees.
Does Setcom need a pairing step for its headsets?
Setcom says headsets pair by being set to the same channel, with no pairing step [3]. The company says its LiberatorMAX system is up and running 30 seconds after opening the box [3]. The fixed mobile radio system uses one base station to connect up to seven wireless headsets [3]. Ask Setcom which system covers the number of trainees in a class and how that setup is priced.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
- OperatorLink's own description of itself (the product of this site's publisher)
- Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
- Setcom, setcomcorp.com/industry/crane, read 2026-10-08
- Sensear, sensear.com, read 2026-10-09
- Sena Industrial, senaindustrial.com, read 2026-10-10
- Crewplex, crewplex.com/applications/cranes, read 2026-10-08
Related comparisons
- Crane communication headsets compared
- Crane communication headsets for aircraft recovery crews
- Crane communication headsets for amusement ride installers
- Crane communication headsets for apprentice riggers in 2026
- Crane communication headsets for boom truck operators
- Crane communication headsets for bridge construction crews
- Crane communication headsets for bridge crews
- Crane communication headsets for bulk material handlers
- Crane communication headsets for concrete pump operators
- Crane communication headsets for foremen in 2026