2Dig Plain comparisons of crane signalling and jobsite communication tools

Crane communication headsets for crane inspectors in 2026

Compares crane headsets and a phone signal tool for crane inspectors, with the facts each publisher gives and questions to ask before you choose.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

A crane inspector needs to hear and speak to the operator and crew while moving around the crane, so the choice depends on how a set links to radios or phones and how many people it reaches. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser [1]. Eartec's EPak beltpack weighs 2.5 oz and is worn clipped to clothing or tucked inside a pocket [2], and Setcom's page says to turn headsets to the same channel to talk to the crew [3].

OptionHow it linksUsers per setPrice
OperatorLinkPhone browser, no app install; crew joins from a shared link or QR code [1][1]Not publishedFree; no paid plan is built yet [1]
EartecLazer-Pro headset links to the radio by Bluetooth, without wires [2]Up to 16 users on the same setup [2]Not published
SetcomHeadsets set to the same channel [3]One base station connects up to seven wireless headsets [3]Not published; described as least costly wireless solution for teams of two or more [3]
CrewplexFull-duplex, hands-free communication that can be integrated with mobile two-way communications [4]Large system for large crews [4]Not published
Sena IndustrialBluetooth and Mesh Intercom technologies [5]Not publishedNot published

What crane inspectors need from crane communication headsets

Crane inspectors check the crane, its rigging and the lift itself, and much of that work happens close to a moving load and away from the operator's cab. They need to hear and be heard over engine and machinery noise, and they usually need both hands free for tools, checklists or the load. Hearing protection matters on a loud site, so a headset that cuts noise while still carrying speech is useful. Inspectors also talk to the operator, signal persons and riggers during a lift, so a clear voice link matters more than a long one. Full-duplex means both people can talk and hear at the same time, which suits a back-and-forth conversation during a lift. Practical limits include how far a person walks from the cab, whether the set links to the radios the crew already carries, how many people need to be on it, and how easily it clips to clothing or a hard hat. A crew should compare each option on these points before choosing.

OperatorLink for crane inspectors

OperatorLink is made by the team that publishes this site, 2Dig. It runs in a phone browser, so no app install is needed. [1] It passes button presses, chat and voice between phones in a browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [1] OperatorLink is currently free to use, and no paid plan is built yet. [1]

Eartec for crane inspectors

Eartec's EPak beltpack weighs 2.5 oz and is worn clipped to clothing or tucked inside a pocket. [2] Both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [2] If a crew picks Expedited shipping and returns the set, the shipping fee is deducted from the refund. [2] The facts gathered for this page say little more about Eartec, so ask the company which system suits crane inspection work before ordering.

Setcom for crane inspectors

Setcom's page says to turn headsets to the same channel to talk to the crew. [3] The company's business office is in Austin, Texas. [3] The facts gathered for this page say little more, so ask Setcom which of its headset systems works with the radios the crew already uses, and how many headsets a single base unit can serve.

Crewplex for crane inspectors

CrewPlex's large system is described as scalable full-duplex hands-free communication for large crews. [4] CrewPlex can be scaled from small crews to large crews and offers optional integration with two-way radios for multi-site communication. [4] CrewPlex products are backed by a two-year warranty. [4] A crane inspector comparing it with other options should check which crew size the large system is meant for and how the radio link is set up before buying.

Sena Industrial for crane inspectors

Sena supports communication solutions for construction, manufacturing, food processing, transportation and other industries where peer-to-peer and group communications are needed. [5] Sena headsets offer hands-free operation, pairing to other devices, and secure peer-to-peer or group communications. [5] Its MeshPort Blue won a Red Dot Award for product design. [5] The facts gathered for this page do not tie Sena to crane work, so ask whether its headsets suit crane inspection.

Matching the tool to the job

Eartec's EPak, which is worn clipped to clothing or tucked inside a pocket, is one option to compare. [2] Crew members who must call a stop during a lift need a signal everyone sees at once. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser [1], and HOLD and SLOW stay on until the last person leaves. [1] An inspector checking in with several crew members across a site can compare Crewplex's large system, described as scalable for large crews, with Eartec, which allows up to 16 users on the same setup. [4][2] An inspector whose crew already carries two-way radios can look at Crewplex, whose optional radio integration covers multi-site communication. [4] A crew on a loud industrial site where peer-to-peer and group talk is needed can look at Sena's line. [5] OperatorLink's one-tap calls, such as Copy That and All Clear, are sent as chat messages. [1] A crew that starts a jobsite can share a link or QR code, and that link stops working 12 hours after the first person joins. [1][1]

Questions to ask before you choose

Does the set link to the radios or phones the crew already carries, or does it need its own equipment? How many people need to be on the link at once, and does one base unit or one room serve them all? If a signal must reach everyone on a moving lift, how does each option show it, and does it stay on screen until the crew clears it? Is the set light enough, and does it clip to clothing or a hard hat for a full shift? What do the warranty and returns cover, and how long do they run? Does the price apply per person, per radio, or per month? If the crew works in loud areas, does the set cut out machinery noise while keeping speech clear? Ask each provider these questions in writing before relying on its answers.

Frequently asked questions

Is OperatorLink a crane communication headset?

OperatorLink runs in a phone browser, so no app install is needed, and it can be added to a phone's home screen as a standalone app. [1][1] It passes button presses, chat and voice between phones in a browser. [1] Voice calls run from the phone browser, and anyone who joins can take part. [1] A reader comparing it with headsets should list the signals and voice links the crew needs, then check each option against that list.

Is OperatorLink free for crane crews?

OperatorLink is currently free to use, and no paid plan is built yet. [1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [1] A jobsite link stops working 12 hours after the first person joins it. [1] A jobsite with nobody in it is wiped after 3 idle hours. [1] Check each other option's price per user, per radio or per month before comparing costs.

Does Setcom need a pairing step before its headsets talk?

Setcom's page says headsets are set to the same channel to talk to the crew. [3] The page also describes one base station that connects up to seven wireless headsets. [3] Setcom describes its LiberatorMAX system as its least costly wireless solution for work teams of two or more people. [3] Ask the company which system suits a crane inspection crew, and what the full cost is, before buying.

How many people can Eartec connect on one headset setup?

Eartec's page says both the EPak and PRO16 systems allow up to 16 users to connect and communicate simultaneously on the same setup. [2] Eartec's page also says users can add more crew members to a system at any time. [2] If a crew orders Expedited shipping and returns the set, the shipping fee is deducted from the refund. [2] Confirm the system names and return terms with Eartec before ordering.

Does OperatorLink show a STOP to the whole crew?

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew in a phone browser. [1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [1] HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [1] On Android browsers, signals such as STOP make the phone buzz; iPhone Safari ignores the buzz. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Eartec, eartecindustrial.com/crane-lift, read 2026-10-08
  3. Setcom, setcomcorp.com/industry/crane, read 2026-10-08
  4. Crewplex, crewplex.com/applications/cranes, read 2026-10-08
  5. Sena Industrial, senaindustrial.com, read 2026-10-10

Related comparisons