TASSTA vs Voxer in 2026
Compare TASSTA and Voxer for a crane crew: what each offers, published prices, and how to choose between them.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Compare TASSTA and Voxer for a crane crew: what each does, its published prices, and how to choose between them. OperatorLink shows STOP, HOLD and SLOW to a crane crew and passes button presses, chat and voice between phones in a browser [1]. Voxer's Personal plan is free for individuals [2]. The facts gathered for TASSTA and Voxer are cited in the table below. Which one fits depends on whether the crew needs signal handling on a jobsite, because the cited facts for TASSTA and Voxer describe nothing about signals.
| Option | Own fee | Card fee |
|---|---|---|
| TASSTA | not published | not published |
| Voxer | Personal plan free for individuals [2]; 14-day free trial for business [3] | not published |
| OperatorLink | Free to use; no paid plan is built yet [1] | not published |
The short answer
A crane crew member needs to get signals to the whole crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]. Voxer's Personal plan is free for individuals [2]. The facts gathered for TASSTA are cited in the table below, and they are not repeated here. The cited facts for TASSTA and Voxer say nothing about signals on a jobsite, so a crew with that need should check both directly before a shift.
What TASSTA and Voxer are built for
The facts gathered for TASSTA for this page are given in the table below, because this page cites no TASSTA fact outside the table. Those facts, read cold, do not describe how TASSTA handles signals, stops or voice on a jobsite, so this page does not say what it does for those jobs. The cited Voxer facts describe a Personal plan that is free for individuals [2]. That fact does not describe how Voxer handles signals on a jobsite either. A crew comparing TASSTA and Voxer should read the facts in the table, keep them to what each quote says, and ask each provider directly about signal handling on a jobsite.
What OperatorLink is built for
OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [1]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it [1]. One-tap messages such as Go Ahead, Copy That and All Clear are sent as chat [1]. Anyone who joins can take part in a voice call run from the phone browser [1].
Pricing and fees
Voxer's Personal plan is free for individuals [2]. The facts gathered for Voxer also describe a 14-day free trial for business [3], and that fact is cited in the table below. The facts gathered for this page do not give a Voxer business price after the trial, so that price is not published here. The TASSTA facts gathered for this page give no price of any kind, so no TASSTA price is published here beyond the table, whose own-fee cell reads not published. OperatorLink is currently free to use, and no paid plan is built yet [1]. The card fee is not published for any option. A crew that expects to pay a card fee should ask each provider for it before choosing.
Setting it up on a jobsite
OperatorLink runs in a phone browser with no app install [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. Phones can add the app to their home screen as a standalone app [1]. A jobsite link stops working 12 hours after the first person joins [1], and a jobsite with nobody in it is wiped after 3 idle hours [1]. Button presses, chat and voice pass between phones in the browser [1]. For TASSTA and Voxer, the facts gathered here do not describe how a crew is added, how signals pass, or how a jobsite is started, so the crew should confirm those steps with each provider directly before a shift.
Things to check before you choose
Which signals does the crew need on a jobsite, and how will you test that each tool passes them before a lift? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters for your crew [1]. Which phones does the crew use, and do all of them keep a browser open for the whole shift? Does a jobsite link that stops working 12 hours after the first person joins suit your shifts? How long a shift does the crew run, so that a jobsite wiped after 3 idle hours is not an interruption? What will Voxer cost after its 14-day business trial [3], and which plan would the crew need?
How to choose
If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that releases every held direction and shows a full-screen alert to everyone else [1]. If the crew needs HOLD and SLOW to stay on for everyone until the jobsite empties, OperatorLink's sources describe that as well [1]. If the crew needs a free start with no paid plan, OperatorLink is currently free to use [1], and Voxer's Personal plan is free for individuals [2]. If the crew wants a tool described in the table whose cited facts say nothing about signals, check TASSTA and Voxer directly against the crew's own needs. A crew that needs signal handling should weigh these choices, because the cited facts for TASSTA and Voxer say nothing about signals.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet [1]. The sources cited on this page give no price beyond that. The card fee is not published for any option, so a crew that expects to pay one should check before choosing. Prices can change, so confirm the current terms with the product before a shift.
Is Voxer free for individuals?
Voxer's Personal plan is free for individuals [2]. The cited Voxer facts also describe a 14-day free trial for business [3], which this page cites only in the table. The facts gathered for this page do not give Voxer's business price after that trial, so that price is not published here. Check Voxer's pricing directly before choosing a paid option for a crew.
Does OperatorLink work on iPhone?
OperatorLink runs in a phone browser with no app install [1]. A phone can add it to its home screen as a standalone app [1]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz [1]. A crew with iPhones should check whether the on-screen alert is enough for its needs.
What facts does this page cite for TASSTA?
The TASSTA facts gathered for this page appear only in the table, because this page cites no TASSTA fact outside the table. Those facts state what each TASSTA source quotes and nothing more, and they give no price. Read them in the table and ask TASSTA directly about any need the facts do not cover, such as signals or voice on a jobsite.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1].
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- Push-to-talk apps for crane crews compared (2026)
- PTT apps for crane crews for construction foremen
- Best push-to-talk apps for crane operators in 2026
- Push-to-talk apps for crane crews in 2026
- Push-to-talk apps for crane crews for contractors
- Crane crew push-to-talk apps for industry
- Push-to-talk apps for crane lift directors in 2026
- Push-to-talk apps for crane crews for port terminal workers
- Push-to-talk apps for rigging supervisors in 2026
- Push-to-talk apps for crane signal persons and riggers