OperatorLink vs Motorola Solutions WAVE PTX in 2026
Compare OperatorLink and Motorola Solutions WAVE PTX for a crane crew: what each does, published prices, jobsite setup, and how to choose.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
A crane crew weighing OperatorLink against Motorola Solutions WAVE PTX needs to know which signals each tool passes on a jobsite and what each one costs. The cited Motorola Solutions facts describe devices and networks built for harsh conditions [1], and this page does not claim more than that.
| Option | Own fee | Card fee |
|---|---|---|
| Motorola Solutions WAVE PTX | not published | not published |
| OperatorLink | Free to use; no paid plan is built yet [2] | not published |
The short answer
A crane crew member needs signals to reach everyone on the crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [2]. Motorola Solutions WAVE PTX is described on its pages as making devices and networks built to perform in the harshest conditions, so customers can stay connected and communicate clearly [1]. Those pages do not describe stops, holds or calls on a jobsite, so this page does not say that the product handles them. Which tool suits a crew depends on which signals the crew needs, and the sections below set out what each source says.
What Motorola Solutions WAVE PTX is built for
The facts gathered for this page come from Motorola Solutions' own pages, and they describe three points. Motorola Solutions makes devices and networks built to perform in the harshest conditions, so customers can stay connected and communicate clearly [1]. Its pages also describe video security and access control solutions for customers across industries, requirements and levels of complexity [1]. The company has also completed its acquisition of D-Fend Solutions [1].
None of these facts describes how crew members pass stops, holds, slow signals or calls, so this page does not say whether Motorola Solutions WAVE PTX does that. A crew should ask the company which of its products covers jobsite signals and how that product passes them.
What OperatorLink is built for
OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [2]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [2]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [2]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it [2]. One-tap radio-style calls, such as Go Ahead, Copy That and All Clear, are sent as chat messages [2]. Anyone who joins can take part in a voice call run from the phone browser [2].
Pricing and fees
OperatorLink is currently free to use, and no paid plan is built yet [2]. The card fee is not published for it.
For Motorola Solutions WAVE PTX, the facts gathered for this page give no price, fee or plan, so none is published here. Check the company's pricing directly, and ask whether any card fee applies before choosing. A crew that expects to pay for a tool should compare the full cost of each option, not only the stated price. Each option's row in the table gives its own fee, and the card fee where its source states one.
Setting it up on a jobsite
OperatorLink runs in a phone browser with no app install [2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [2]. A phone can add the app to its home screen as a standalone app [2]. A jobsite link stops working 12 hours after the first person joins it [2], and a jobsite with nobody in it is wiped after 3 idle hours [2]. Button presses, chat and voice pass between phones in the browser [2].
The facts gathered for this page describe no steps for getting a crew onto Motorola Solutions WAVE PTX and no way of passing signals with it, so this page does not describe either. Before a shift, ask the company for its setup steps, and test that a stop reaches every phone on the crew.
Things to check before you choose
Which signals does the crew need on a jobsite, and how will you test that each tool passes them before a lift?
Which phones does the crew use? On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters for your crew [2].
Does the crew's shift length fit how long a jobsite link stays live?
What will Motorola Solutions WAVE PTX cost for a crew, and does the company publish a card fee?
How to choose
If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that releases every held direction and shows a full-screen alert to everyone else [2]. If the crew needs HOLD and SLOW to stay on for everyone until the last person leaves the jobsite, OperatorLink's sources describe that as well [2]. If the crew needs a tool that is currently free to use, OperatorLink fits that need, with no paid plan built yet [2]. If the crew's main need is devices and networks that perform in harsh conditions, Motorola Solutions WAVE PTX's pages describe that [1]. The cited facts for Motorola Solutions WAVE PTX do not cover stops, holds or slow signals, so a crew with those needs should confirm them with the company before choosing.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet [2]. The sources cited on this page give no other price for it, and the card fee is not published. Prices can change, so confirm the current terms with the product before a crew relies on it for a shift.
Does OperatorLink work on iPhone?
OperatorLink runs in a phone browser with no app install [2]. A phone can add it to its home screen as a standalone app [2]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz [2]. A crew with iPhones should check that it can see the full-screen alert [2].
Does Motorola Solutions WAVE PTX show STOP and HOLD signals on a jobsite?
The facts gathered for this page do not describe STOP, HOLD or SLOW signals for Motorola Solutions WAVE PTX, so this page does not say whether it shows them. Its cited pages describe devices and networks built to perform in the harshest conditions [1]. Ask the company how its product handles a stop signal across every phone on a crew, and test that on the crew's phones before a shift.
What does Motorola Solutions WAVE PTX cost?
The facts gathered for this page give no price, fee or plan for Motorola Solutions WAVE PTX, so none is published here. Check the company's pricing directly, and ask whether a card fee applies. OperatorLink, by comparison, is currently free to use [2], and its card fee is not published. Compare the full cost of each option before a crew commits.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it [2]. A jobsite with nobody in it is wiped after 3 idle hours [2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [2]. A crew whose shift runs long should plan for the link to stop working partway through [2].
OperatorLink is currently free to use, and no paid plan is built yet. [2]
Try OperatorLinkSources
Related comparisons
- Push-to-talk apps for crane crews compared (2026)
- Push-to-talk apps for aircraft recovery crane crews
- Push-to-talk apps for crane crews for apprentice riggers
- Push-to-talk apps for boom truck crane crews in 2026
- Push-to-talk apps for bridge construction crane crews
- Push-to-talk apps for crane crews on bridge inspection jobs
- Push-to-talk apps for bulk material handlers on cranes compared
- Push-to-talk Apps for Concrete Pump Crews in 2026
- PTT apps for crane crews for construction foremen
- Push-to-talk Apps for Crane Crews in 2026