Motorola Solutions WAVE PTX vs VoicePing in 2026
Compare Motorola Solutions WAVE PTX and VoicePing for a crane crew: what each one does, published prices, setup on a jobsite, and how to choose.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
Crane crews need stop, hold and slow signals to reach everyone on the jobsite while the crane moves, and the sources cited here say little about how either Motorola Solutions WAVE PTX or VoicePing passes them. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]. The rest of this page sets out what each tool's pages describe and what to check before choosing.
| Option | Own fee | Card fee |
|---|---|---|
| Motorola Solutions WAVE PTX | not published | not published |
| VoicePing | Standard $2 per user per month, billed annually [2]; Plus $4 per user per month, billed annually [2]; Enterprise, contact sales for a price estimate [2] | not published |
| OperatorLink | Free to use; no paid plan is built yet [1] | not published |
The short answer
A crane crew member needs signals to reach everyone on the jobsite while the crane moves, so the first question is which tool does that job. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [1]. The Motorola Solutions pages cited here describe video security and access control, and devices and networks built to perform in the harshest conditions [3] [3]. The VoicePing pages cited here describe 99% outdoor service coverage over mobile networks and on-premise deployments for customers with their own data center [4] [2]. The need the Motorola Solutions pages meet most directly is devices built for harsh conditions [3], and the need the VoicePing pages meet is outdoor coverage [4]. The cited facts do not describe stop, hold or slow signals for either tool, so a crew with that need should test each one before a lift.
What Motorola Solutions WAVE PTX and VoicePing are built for
The Motorola Solutions pages cited here describe video security and access control solutions for customers across industries and levels of complexity [3]. They also describe devices and networks built to perform in the harshest conditions, so customers can stay connected and communicate clearly [3]. One case on those pages says Middlesex Health uses the Rave app to give offsite nurses a safety timer and emergency alerts [3]. The VoicePing pages cited here describe 99% outdoor service coverage provided by mobile networks over 2G, 3G, 4G and WiFi [4]. They also describe on-premise deployments for customers who have their own data center [2]. Neither set of cited pages describes a stop, hold or slow signal passed to a crew, so this page does not say that either tool does that.
What OperatorLink is built for
OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [1]. A STOP releases every move that is being held, on every phone, and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it [1]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages [1]. Anyone who joins can take part in a voice call run from the phone browser [1].
Pricing and fees
The facts gathered for this page give no price for Motorola Solutions WAVE PTX, so none is published here. VoicePing's Standard plan costs $2 per user per month, billed annually [2]. The table above lists its other plan prices and its contact-sales option. OperatorLink is currently free to use, and no paid plan is built yet [1]. A card fee is the charge for paying by card. None is published for any of the three options in the facts gathered here, so a crew that expects one should ask each provider before choosing.
Setting it up on a jobsite
The Motorola Solutions pages cited here do not describe how a crew is added or how signals pass, so the crew should ask the company how a jobsite is set up before a shift. VoicePing offers on-premise deployments for a customer that has its own data center [2]. Ask VoicePing how a crew joins and passes signals, since the facts gathered for this page do not describe either. OperatorLink runs in a phone browser with no app install [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. A phone can add the app to its home screen as a standalone app [1]. A jobsite link stops working 12 hours after the first person joins [1], and a jobsite with nobody in it is wiped after 3 idle hours [1]. Button presses, chat and voice pass between phones in the browser [1].
Things to check before you choose
Which signals does your crew need to pass on a jobsite, such as a stop, a hold or a slow, and how will you test each tool before a lift? VoicePing's pages state 99% outdoor service coverage over mobile networks [4]. Does that match the sites your crew works on? Motorola Solutions' pages describe devices built for the harshest conditions [3], so ask how those devices pass a signal to the whole crew. On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [1]. Does your crew use iPhones, and is the full-screen alert enough? A jobsite link stops working 12 hours after the first person joins [1]. Does that suit your shifts? Ask each provider for its card fee, since none is published in the facts gathered here.
How to choose
If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that releases every held move and shows a full-screen alert to everyone else [1]. If the crew needs HOLD and SLOW to stay on until the jobsite empties, OperatorLink's sources describe that as well [1]. If the crew needs devices and networks built for harsh conditions, Motorola Solutions' pages describe that [3]. If the crew needs coverage across outdoor sites, VoicePing's pages describe 99% outdoor service coverage [4]. If the crew needs a free start, OperatorLink is currently free to use [1], and VoicePing's Standard plan is listed at $2 per user per month [2]. A crew that needs both signal handling and rugged gear should check each option against both needs, because no single source here covers both.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet [1]. The card fee is not published for it in the facts gathered here, so a crew that expects a card fee should ask before choosing. Prices can change, so confirm the current terms with the product before a shift starts. The sources for this page give no other price for OperatorLink.
Does VoicePing have a price per user?
VoicePing's Standard plan costs $2 per user per month, billed annually [2]. The table above lists its other plan prices and its contact-sales option. A price may change, so check VoicePing's current pricing before choosing a paid option for a crew. The facts gathered for this page do not publish a card fee, so ask VoicePing for that figure directly.
Does Motorola Solutions WAVE PTX have a published price?
The facts gathered for this page give no price for Motorola Solutions WAVE PTX, so none is published here. The pages cited here describe video security and access control solutions [3], and devices and networks built to perform in the harshest conditions [3]. Those pages do not describe how a crane crew's signals pass, so ask the company for pricing and for how signals are handled before buying.
Does OperatorLink work on iPhone?
OperatorLink runs in a phone browser with no app install [1]. A phone can add it to its home screen as a standalone app [1]. On Android browsers, a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz [1]. A crew with iPhones should check whether the full-screen alert is enough for its needs.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. A crew whose shift runs past 12 hours should plan to start a new jobsite once the link expires.
OperatorLink is currently free to use, and no paid plan is built yet. [1]
Try OperatorLinkSources
Related comparisons
- Push-to-talk apps for crane crews compared (2026)
- Push-to-talk apps for aircraft recovery crane crews
- Push-to-talk apps for crane crews for apprentice riggers
- Push-to-talk apps for boom truck crane crews in 2026
- Push-to-talk apps for bridge construction crane crews
- Push-to-talk apps for crane crews on bridge inspection jobs
- Push-to-talk apps for bulk material handlers on cranes compared
- Push-to-talk Apps for Concrete Pump Crews in 2026
- PTT apps for crane crews for construction foremen
- Push-to-talk Apps for Crane Crews in 2026