2Dig Plain comparisons of crane signalling and jobsite communication tools

Motorola Solutions WAVE PTX vs Peak PTT in 2026

Peak PTT and Motorola Solutions WAVE PTX side by side with OperatorLink for crane crews, covering what each does, published prices and setup.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

This page sets out what a crane crew member gets from OperatorLink, Peak PTT and Motorola Solutions WAVE PTX, and what each one's pages publish about cost and setup.

OptionOwn feeCard fee
Motorola Solutions WAVE PTXnot publishednot published
Peak PTTPTT-84G radio $229 with a $19.95 activation fee, and $24.95 per month per radio for unlimited push-to-talk with no contracts [1] [2]; optional dispatch seat $12 per month per seat [2]not published
OperatorLinkFree to use, with no paid plan built yet [3]not published

The short answer

A crane crew member needs signals to reach the whole crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [3]. The Peak PTT pages cited here describe a push-to-talk radio at $229 with a $19.95 activation fee, $24.95 per month for unlimited push-to-talk with no contracts, and an optional dispatch seat at $12 per month per seat [1] [2]. The Motorola Solutions WAVE PTX pages cited here describe devices and networks built to perform in the harshest conditions [4]. Neither set of cited pages says anything about signals or voice on a jobsite, so a crew with that need should check each tool directly before choosing.

What Motorola Solutions WAVE PTX, Peak PTT is built for

Motorola Solutions says it makes devices and networks built to perform in the harshest conditions, so customers can stay connected and communicate clearly [4]. It describes its APX P25 radio portfolio as built to streamline mission-critical communications [4]. The facts gathered for this page do not give Motorola Solutions WAVE PTX pricing or setup details, so those need to come from the company. Peak PTT's pages, as cited here, describe a PTT-84G push-to-talk radio with no contracts and an optional dispatch seat that lets you run dispatch from any PC and removes the need for a base station [1] [2]. Those facts do not describe how a crew is added or how a signal passes between phones, so check that with Peak PTT before you rely on it.

What OperatorLink is built for

OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [3]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [3]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [3]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it [3]. One-tap messages such as Go Ahead, Copy That and All Clear are sent as chat [3]. Anyone who joins can take part in a voice call run from the phone browser [3].

Pricing and fees

Peak PTT's pages, as cited here, list the PTT-84G radio at $229 with a $19.95 activation fee and $24.95 per month for unlimited push-to-talk, with no contracts [1]. The optional dispatch seat is $12 per month per seat [2]. The facts gathered for this page do not give a price for Motorola Solutions WAVE PTX, so that price is not published here. OperatorLink is currently free to use, and no paid plan is built yet [3]. No card fee is published for any of the three options, so a crew that expects to pay a card fee should ask each provider for it before choosing.

Setting it up on a jobsite

OperatorLink runs in a phone browser with no app install [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. Phones can add the app to their home screen as a standalone app [3]. A jobsite link stops working 12 hours after the first person joins it [3], and a jobsite with nobody in it is wiped after 3 idle hours [3]. Button presses, chat and voice pass between phones in the browser [3]. The facts gathered for this page do not describe how a crew gets onto Motorola Solutions WAVE PTX or Peak PTT, or how signals pass between phones on either. Peak PTT's optional dispatch seat, which its page says runs from any PC without a base station, is the only setup detail cited here for that tool [2].

Things to check before you choose

Does the crew need dispatch run from a computer? Peak PTT's optional seat costs $12 per month per seat, and its page says dispatch can run from any PC without a base station [2]. Which phones does the crew use? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters for your crew [3]. Does a jobsite link that stops working 12 hours after the first person joins suit your shifts? [3] What will Peak PTT cost for a full crew once the activation fee is counted, and does that fee apply to each radio? Confirm that with Peak PTT before choosing [1]. Does the crew need a price from Motorola Solutions WAVE PTX? The facts gathered here give none, so ask the company directly before comparing. Which signals does the crew need on a jobsite, and how will you check that each tool passes them before a lift?

How to choose

If the crew needs a stop that reaches every phone, OperatorLink is described as releasing every held direction on every phone and showing a full-screen alert to everyone else [3]. If the crew needs HOLD and SLOW to stay on for everyone until the jobsite empties, OperatorLink is described that way as well [3]. If the crew wants a radio with a stated monthly price and an optional dispatch seat, Peak PTT's pages list its radio at $229 with $24.95 per month for unlimited push-to-talk [1], and its dispatch seat at $12 per month per seat [2]. If the crew wants devices built for harsh conditions, Motorola Solutions' pages describe that [4]. A crew that needs signal handling on phones and a radio at the same time should check each option against both needs, because the cited sources do not cover both for any single tool.

Frequently asked questions

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [3]. The pages gathered for this page give no other price for it. No card fee is published for OperatorLink, so a crew that expects to pay one should check before choosing. Prices can change, so confirm the current terms with the product before a shift starts.

Does Peak PTT charge an activation fee?

Peak PTT's page lists a $19.95 activation fee next to its PTT-84G push-to-talk radio, which is priced at $229 [1]. The same page gives $24.95 per month for unlimited push-to-talk, with no contracts [1]. The cited pages do not say whether the activation fee applies to each radio, so ask Peak PTT to confirm that before buying more than one.

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install [3]. A phone can add it to its home screen as a standalone app [3]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz [3]. A crew with iPhones should check whether the full-screen alert is enough for its needs.

Does Motorola Solutions WAVE PTX publish a price?

The facts gathered for this page do not give a price for Motorola Solutions WAVE PTX, so no price is published here. Its page describes devices and networks built to perform in the harshest conditions [4]. Ask Motorola Solutions for its pricing before comparing it with the other two options, since no card fee is published for it either.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it [3]. A jobsite with nobody in it is wiped after 3 idle hours [3]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [3]. A crew whose shift runs past 12 hours should start a new jobsite with a fresh link [3].

OperatorLink is currently free to use, and no paid plan is built yet. [3]

Try OperatorLink

Sources

  1. Peak PTT, peakptt.com/pages/construction-companies, read 2026-10-08
  2. Peak PTT, peakptt.com/pages/peak-push-to-talk-pricing-matrix, read 2026-10-08
  3. OperatorLink's own description of itself (the product of this site's publisher)
  4. Motorola Solutions WAVE PTX, motorolasolutions.com, read 2026-10-17

Related comparisons