Microsoft Teams Walkie Talkie vs Peak PTT
Compare Microsoft Teams Walkie Talkie and Peak PTT for a crane crew: what each does, published prices, jobsite setup, and how to choose.
2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.
This page compares Peak PTT and Microsoft Teams Walkie Talkie for a crane crew, and sets OperatorLink alongside them. Peak PTT's own page describes its PTT-84G push-to-talk radio at $229, with a $19.95 activation fee and $24.95 per month for unlimited PTT [1]. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [2]. No facts about Microsoft Teams Walkie Talkie were gathered for this page, so it says less about that option and points the reader to check it directly.
| Option | Own fee | Card fee |
|---|---|---|
| Peak PTT | $229 per radio, $19.95 activation, $24.95/mo unlimited PTT [1] | not published |
| Microsoft Teams Walkie Talkie | not published | not published |
| OperatorLink | Free to use; no paid plan is built yet [2] | not published |
The short answer
A crane crew member needs to pass push-to-talk voice and a stop or hold across the jobsite while the crane moves. Peak PTT sells push-to-talk radios that transmit voice over AT&T's nationwide LTE network [1], with a flat monthly rate per radio for unlimited nationwide push-to-talk [3]. Its page says the gear has sub-300-millisecond latency, no dead zones, no repeaters, and no FCC licensing [1]. Microsoft Teams Walkie Talkie appears in the query, but no facts about it were gathered for this page, so the crew should check it directly with Microsoft. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [2].
What Microsoft Teams Walkie Talkie, Peak PTT is built for
The facts for this page cover Peak PTT from its own pages; no Microsoft Teams Walkie Talkie facts were gathered. Peak PTT describes its PTT-84G radio as a field workhorse priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited PTT, with no contracts [1]. Its page says both radios ship pre-programmed and include the GPS Tracking Portal with 90-day location history, geofencing, and real-time crew visibility [1]. Both radios carry a lifetime hardware warranty while the service plan is active [1]. Peak PTT says its gear uses sub-300-millisecond latency, no dead zones, no repeaters, and no FCC licensing [1], transmitting voice over AT&T's nationwide LTE network [1]. It offers predictable flat monthly pricing per device [1] and supports multiple simultaneous talk groups [1]. Same-business-day shipping is offered on most orders [1]. Those facts describe a radio and its service, not a phone app, so this page does not say how the gear or Microsoft Teams Walkie Talkie behaves on a jobsite.
What OperatorLink is built for
OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a phone browser [2]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [2]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [2]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, the other phones drop it [2]. One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages [2]. Anyone who joins can take part in a voice call run from the phone browser [2].
Pricing and fees
Peak PTT's PTT-84G is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited PTT [1]. Its core radio service is priced at $24.95 per month per radio for unlimited nationwide push-to-talk [3], and a single flat monthly rate covers that on Tier-1 U.S. carrier networks with 60-second GPS tracking included [3]. The optional dispatch seat add-on costs $12 per month per seat [3]. Peak PTT says its pricing has no contracts [1]. No Microsoft Teams Walkie Talkie price was published in the facts for this page, so its price is not published here. OperatorLink is currently free to use, and no paid plan is built yet [2]. The card fee is not published for any option. A crew that expects to pay a card fee should ask each provider for it before choosing.
Setting it up on a jobsite
OperatorLink runs in a phone browser with no app install [2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [2]. Phones can add the app to the home screen as a standalone app [2]. A jobsite link stops working 12 hours after the first person joins [2], and a jobsite with nobody in it is wiped after 3 idle hours [2]. Button presses, chat and voice pass between phones in the browser [2]. For Peak PTT, the facts describe radios that ship pre-programmed and ready to transmit voice over AT&T's network [1], with access to the GPS Tracking Portal included on both [1]. The facts do not describe how a crew is added to a talk group or where the radios start, so the crew should confirm those steps with Peak PTT before a shift. The facts for Microsoft Teams Walkie Talkie do not describe any setup, so check how the crew is added directly with Microsoft.
Things to check before you choose
Does the crew want hardware radios or a phone app? Peak PTT sells radios with a monthly service, while OperatorLink runs in a phone browser, so match the gear to what the crew already carries. How will a hold or stop reach every crew member, and how will you test it before a lift? Which phones does the crew use? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters [2]. What does Microsoft Teams Walkie Talkie cost and how is the crew added, since no price or setup facts are published on this page? Does a jobsite link that stops working 12 hours after the first person joins suit your shifts?
How to choose
If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that releases every held direction and shows a full-screen alert to everyone else [2]. If the crew needs HOLD and SLOW to stay on for everyone until the jobsite empties, OperatorLink's sources describe that as well [2]. If the crew needs dedicated radios for voice over a carrier network, Peak PTT's page describes radios that transmit over AT&T's LTE network [1]. If the crew needs GPS tracking with 90-day location history and geofencing, Peak PTT includes that on both radios [1]. If the crew needs a free start with no paid plan, OperatorLink is currently free to use [2]. A crew that wants Microsoft Teams Walkie Talkie should check it directly with Microsoft, because no facts for it are published on this page.
Frequently asked questions
Is OperatorLink free to use?
OperatorLink is currently free to use, and no paid plan is built yet [2]. The sources cited on this page give no price beyond that. The card fee is not published for any option, so a crew that expects to pay one should check before choosing. Prices can change, so confirm the current terms with the product before a shift.
How much does Peak PTT cost per radio?
Peak PTT's PTT-84G is priced at $229, with a $19.95 activation fee and $24.95 per month for unlimited PTT, with no contracts [1]. Its core radio service is $24.95 per month per radio for unlimited nationwide push-to-talk [3]. An optional dispatch seat add-on costs $12 per month per seat [3]. A crew ordering more than one radio should total the per-device monthly fee across its radios.
Does OperatorLink work on iPhone?
OperatorLink runs in a phone browser with no app install [2]. A phone can add it to its home screen as a standalone app [2]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz [2]. A crew with iPhones should check whether the on-screen alert is enough for its needs.
How long does an OperatorLink jobsite link last?
A jobsite link stops working 12 hours after the first person joins it [2]. A jobsite with nobody in it is wiped after 3 idle hours [2]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [2]. A crew whose shift runs past 12 hours should start a new jobsite with a fresh link.
Which signals does Peak PTT send to a crew?
The Peak PTT facts on this page describe push-to-talk voice over AT&T's LTE network [1], multiple simultaneous talk groups [1], and the GPS Tracking Portal with 90-day location history, geofencing, and real-time crew visibility [1]. They do not describe a stop, hold or slow signal. A crew that needs those signals should check with Peak PTT directly before a shift.
OperatorLink is currently free to use, and no paid plan is built yet. [2]
Try OperatorLinkSources
Related comparisons
- Push-to-talk apps for crane crews compared (2026)
- Best push-to-talk apps for crane operators in 2026
- Push-to-talk apps for crane lift directors in 2026
- Push-to-talk apps for rigging supervisors in 2026
- Push-to-talk apps for crane signal persons and riggers
- Best push to talk apps for crane crews, site safety managers 2026
- Best push-to-talk apps for tower crane operators in 2026
- ESChat alternatives for crane crews in 2026
- ESChat vs GroupTalk in 2026: Crane Crew Tools Compared
- ESChat vs Microsoft Teams Walkie Talkie in 2026