2Dig Plain comparisons of crane signalling and jobsite communication tools

Microsoft Teams Walkie Talkie vs Motorola WAVE PTX in 2026

Comparing Microsoft Teams Walkie Talkie, Motorola Solutions WAVE PTX and OperatorLink for crane crew signals: what each does, fees, setup and choice.

By 2Dig ยท

2Dig is published by the makers of OperatorLink, which is compared here alongside other tools.

A crane crew that needs signals on a jobsite can weigh three tools on this page, including OperatorLink. The table sets out the fees each source gives, and the sections below cover what each tool does and how it is set up.

OptionOwn feeCard fee
Microsoft Teams Walkie Talkienot publishednot published
Motorola Solutions WAVE PTXnot publishednot published
OperatorLinkFree to use; no paid plan is built yet [1]not published

The short answer

A crane crew member needs signals to reach the whole crew while the crane moves. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a browser [1]. Motorola Solutions describes its APX P25 radio portfolio as built to streamline mission-critical communications [2]. The facts gathered for this page do not describe Microsoft Teams Walkie Talkie, so this page does not say what it does.

Which one fits depends on whether the crew needs a stop that reaches every phone. OperatorLink's sources describe a STOP that releases every held direction on every phone [1]. The sources gathered for Motorola Solutions WAVE PTX and Microsoft Teams Walkie Talkie do not describe a stop signal, so a crew with that need should check each one directly.

What Microsoft Teams Walkie Talkie is built for

No facts about Microsoft Teams Walkie Talkie were gathered for this page, so this page does not say what it does. Check Microsoft's own pages before choosing it.

What OperatorLink is built for

OperatorLink is made by the team that publishes this site. For a crane crew member, it shows STOP, HOLD and SLOW to the jobsite crew, and passes button presses, chat and voice between phones in a browser [1]. A STOP releases every held direction on every phone and shows a full-screen alert to everyone else [1]. HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves [1]. Holding a move button keeps sending that move to the other phones, and if the move stops arriving for 2 seconds, they drop it [1]. One-tap messages such as Go Ahead, Copy That and All Clear are sent as chat [1]. Anyone who joins can take part in a voice call run from the phone browser [1].

Pricing and fees

No price for Microsoft Teams Walkie Talkie was gathered for this page, so its price is not published here. The same is true of Motorola Solutions WAVE PTX, whose gathered pages give no price.

OperatorLink is currently free to use, and no paid plan is built yet [1]. The card fee is not published for any of the three options. A crew that expects to pay a card fee should ask each provider for it before choosing, and should confirm current terms before a shift.

Setting it up on a jobsite

OperatorLink runs in a phone browser with no app install [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. Phones can add the app to their home screen as a standalone app [1]. A jobsite link stops working 12 hours after the first person joins it [1], and a jobsite with nobody in it is wiped after 3 idle hours [1]. Button presses, chat and voice pass between phones in the browser [1].

The facts gathered for Microsoft Teams Walkie Talkie do not describe how a crew is added, how signals pass, or how a jobsite is started, so the crew should confirm those with Microsoft directly before a shift. For Motorola Solutions WAVE PTX, the gathered facts do not describe how a crew is set up or how signals pass on a jobsite either, so check those with Motorola Solutions before relying on it.

Things to check before you choose

Which signals does the crew need on a jobsite, and how will you test that each tool passes them before a lift?

Does a jobsite link that stops working 12 hours after the first person joins suit your shifts? [1]

Which phones does the crew use? On Android browsers a signal such as STOP makes the phone buzz, but iPhone Safari ignores the buzz, so check whether a buzz alert matters for your crew [1].

What does each option cost for a crane crew, and what card fee applies?

Do the sources for Microsoft Teams Walkie Talkie and Motorola Solutions WAVE PTX cover the signals your crew uses? If they do not, ask each vendor to show those signals working before you commit.

How to choose

If the crew needs a stop that reaches every phone, OperatorLink's sources describe a STOP that releases every held direction and shows a full-screen alert to everyone else [1]. If the crew needs HOLD and SLOW to stay on for everyone until the last person leaves the jobsite, OperatorLink's sources describe that as well [1]. If the crew needs a free start with no paid plan, OperatorLink is currently free to use [1].

If the crew wants a safety timer and emergency alerts, Motorola Solutions' Rave app is described as giving offsite nurses at one health system those features [2]. If the crew needs radios, Motorola Solutions describes its APX P25 radio portfolio as built to streamline mission-critical communications [2].

The facts gathered for Microsoft Teams Walkie Talkie do not match it to any of these needs, so a crew that wants to consider it should read Microsoft's own pages first. No single source here covers every need, so check each option against the signals the crew uses.

Frequently asked questions

Is Microsoft Teams Walkie Talkie free for a crane crew?

No price for Microsoft Teams Walkie Talkie was gathered for this page, so its price and card fee are not published here. This page does not say whether a free option exists or what it costs for a crew of any size. Check Microsoft's own pricing page before choosing it, and ask about any card fee for paid use. OperatorLink is currently free to use, and no paid plan is built yet [1].

Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet [1]. The card fee is not published for it, so a crew that expects to pay one should ask before choosing. Prices can change, so confirm the current terms with the product before a shift. The sources cited on this page give no price beyond that.

Does Motorola Solutions WAVE PTX send a STOP signal to every phone on a crane crew?

The facts gathered for this page do not describe a stop signal for Motorola Solutions WAVE PTX, so this page does not say whether it sends one. Its gathered pages describe a safety timer and emergency alerts for offsite nurses [2] and an APX P25 radio portfolio built to streamline mission-critical communications [2]. Ask Motorola Solutions to show how a stop reaches each phone before relying on it. OperatorLink's sources describe a STOP that releases every held direction on every phone [1].

Does OperatorLink work on iPhone?

OperatorLink runs in a phone browser with no app install [1]. A phone can add it to its home screen as a standalone app [1]. On Android browsers, signals such as STOP make the phone buzz, but iPhone Safari ignores the buzz [1]. A crew with iPhones should check whether the on-screen alert is enough for its needs.

How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it [1]. A jobsite with nobody in it is wiped after 3 idle hours [1]. The person who starts a jobsite shares a link or QR code, and the crew joins from it [1]. A crew whose shift runs past 12 hours should start a new jobsite with a fresh link. [1]

OperatorLink is currently free to use, and no paid plan is built yet. [1]

Try OperatorLink

Sources

  1. OperatorLink's own description of itself (the product of this site's publisher)
  2. Motorola Solutions WAVE PTX, motorolasolutions.com, read 2026-10-17

Related comparisons