---
{"title": "How to talk across a noisy yard for shipyard riggers in 2026", "description": "Ways for shipyard riggers to talk across a noisy yard: what to have ready, the steps, the tool choices and the mistakes that cut a signal short.", "url": "https://2dig.com/how-to-talk-across-a-noisy-yard-for-shipyard-riggers/", "date": "2026-10-24"}
---
Ways for shipyard riggers to talk across a noisy yard: what to have ready, the steps, the tool choices and the mistakes that cut a signal short.

Talking across a noisy yard starts with agreeing how directions travel and confirming that each one was received before the load moves. A phone browser can carry those directions: OperatorLink passes button presses, chat and voice between phones in a browser. [^1] Whichever way the crew talks, every rigger needs a way to hear or see a stop, and a second way to raise one. The phone needs a working data signal, and iPhone Safari ignores the buzz on an alert. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the shift, each rigger needs a charged phone with a working browser and a data signal, because button presses, chat and voice pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the crew joins from it, so every rigger needs that link before the first lift. [^1] A jobsite link stops working 12 hours after the first person joins it, which matters in a yard that runs past one shift. [^1] A jobsite with nobody in it is wiped after 3 idle hours, so a session left standing overnight will not be there in the morning. [^1] Check the sound and the screen on every phone: on Android browsers signals such as STOP make the phone buzz, and iPhone Safari ignores the buzz. [^1] Add the page to the phone's home screen before the shift so it opens as a standalone app. [^1]

## Step by step

1. Agree before the shift who calls the moves, the words for stop, hold and slow, and how a rigger answers back, because yard noise swallows a half-heard call.
2. Pick how directions travel, voice at close range, hand signals, two-way radios or a phone browser, and tell every rigger which one is the yard's main channel.
3. Check the gear: power for the whole shift, and a working data signal on any phone that runs a browser. [^1]
4. Have the person who starts the jobsite open the session in a phone browser, with no app install needed. [^1]
5. That person shares the link or QR code with the crew, and each rigger joins from it. [^1]
6. Confirm every rigger is in before the first lift, so each one sees the same STOP, HOLD and SLOW. [^1]
7. Agree which signals stay on, because HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1]
8. Keep a move button held while the move is running: it keeps sending that move to the other phones, and those phones drop it if it stops arriving for 2 seconds. [^1]
9. Use the one-tap radio-style calls such as Go Ahead, Copy That and All Clear, sent as chat messages, for the short exchanges that do not need a full sentence. [^1]
10. When STOP is pressed, every held direction releases on every phone and everyone else sees a full-screen alert, so stop the move and look before starting again. [^1]
11. Anyone who joins can take part in a voice call run from the phone browser, which helps when machine noise drowns out a shout. [^1]
12. At the end of the shift every rigger leaves the jobsite, and a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in a phone browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] OperatorLink is currently free to use, and no paid plan is built yet. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the crew can keep the call open for the whole shift, whether the signal person's hands stay in view, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that every rigger can be heard over yard noise, that the batteries last the shift, and that the channel stays clear through the lift.

Match the option to the crew and the yard, and keep a fallback ready, since signals in a browser depend on the phone's data signal.

## Common mistakes to avoid

Relying on one phone for the STOP call: if that phone's data signal drops, the rest of the crew does not see it, so keep a voice or hand option ready. Assuming every phone alerts the same way: on Android browsers signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every device. [^1] Leaving an empty jobsite and expecting it to hold signals for the next shift: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [^1] Not checking that a move still arrives: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Letting the phone go to sleep mid-lift; the page can be added to the home screen as a standalone app. [^1] Declaring a channel decided once, at the start of the shift, instead of repeating the plan to riggers who come on later.

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser, so the riggers' phones still need a working data signal through the shift. Check each phone's data plan before relying on it, and keep a radio or hand signal as the fallback for the yard.

### What does STOP do in OperatorLink?

When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else in the jobsite, so the crew sees it at once. [^1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [^1] Agree before the shift what each rigger does the moment STOP appears.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it [^1], so a link shared on an earlier shift may no longer open the session. A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, start a fresh jobsite and share the new link or QR code with the crew.

### Do STOP signals buzz on every phone in OperatorLink?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Check the sound and screen settings on every phone before the lift, and agree how a rigger who cannot feel a buzz will be told about a stop.

### Can shipyard riggers talk over the phone with OperatorLink?

Anyone who joins a jobsite can take part in a voice call run from the phone browser [^1], and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Voice depends on the phone's data signal, so keep a radio or hand signal ready where the yard blocks it.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
