---
{"title": "How to stay in contact with the rigger during a pick", "description": "Stay in contact with the rigger during a pick from a phone browser: what to have ready, the steps, tool options and common mistakes for hoist operators.", "url": "https://2dig.com/how-to-stay-in-contact-with-the-rigger-during-a-pick-for-hoist-operators/", "date": "2026-10-24"}
---
Stay in contact with the rigger during a pick from a phone browser: what to have ready, the steps, tool options and common mistakes for hoist operators.

Hoist operators can stay in contact with the rigger during a pick by joining one jobsite session in a phone browser, with a link or QR code shared by whoever starts it. [^1] [^1] STOP, HOLD and SLOW are shown to the crew in that session. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Two-way radio | not published | not published | not published |
| Phone video call app | not published | not published | not published |

## What you need before you start

Each phone needs a working browser for the whole pick, because button presses, chat and voice pass between phones in a browser. [^1] The person who starts the jobsite shares a link or QR code, and the operator and the rigger join from it. [^1] Agree before the lift on who holds the phone that shows HOLD and SLOW, since those two signals stay on for everyone until the last person leaves the jobsite. [^1] A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may not open. [^1] The page runs in a phone browser with no app install, so the phones need only a browser and a connection. [^1] Have a backup signal, such as a hand signal or a radio, ready for the pick in case a phone cannot connect.

## Step by step

1. Check that each phone has a working browser for the whole pick, because the signals pass between phones in a browser. [^1]
2. Open the session from a phone browser. Nothing needs to be installed first. [^1]
3. Share the link or QR code with the rigger and the rest of the crew, and each member joins from it. [^1]
4. Confirm everyone is in the session before the lift, so each phone shows the same STOP, HOLD and SLOW. [^1]
5. Agree on the hold: HOLD and SLOW stay on for everyone and are cleared only when the last person leaves. [^1]
6. Hold a move button to keep sending that move to the other phones. If the move stops arriving for 2 seconds, the other phones drop it, so keep the button held only while the load is moving. [^1]
7. Use the one-tap calls such as Go Ahead, Copy That and All Clear for quick replies, which are sent as chat messages. [^1]
8. If a longer exchange is needed, anyone who joins can take part in a voice call run from the phone browser. [^1]
9. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else, so the crew pauses before moving again. [^1]
10. At the end of the pick, everyone leaves the session. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] It runs in a phone browser with no app install. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]

A two-way radio is a second option. No facts for this page describe one, so check that the operator and the rigger can hear each other over the site noise, that the channel stays clear through the pick, and that everyone agrees on the call words beforehand.

A phone video call app is a third option. No facts for this page describe one, so check whether the call can stay open for the whole pick, whether the rigger's signals stay in view, and whether the phone's screen stays on during the lift.

Match the option to the site and the crew, and keep a backup ready in case a phone loses its connection during the pick.

## Common mistakes to avoid

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every phone before the pick. [^1] Expecting an old session to still be open. A jobsite with nobody in it is wiped after 3 idle hours, and a link stops working 12 hours after the first person joins it. [^1] [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1] Assuming a move still reaches the other phones after the button is released. If the move stops arriving for 2 seconds, the other phones drop it. [^1] Skipping the home screen step on a phone that will be used all shift. Adding the page to the home screen lets it open as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free to use for hoist operators?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Because the session runs in a phone browser, each phone needs a working browser for the whole pick. [^1] Check the phone's data plan before relying on it, since the browser needs a connection to pass signals between phones.

### What does the STOP signal do in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently, because they stay on for everyone in the jobsite until the last person leaves. [^1] Agree on what each signal means with the rigger and the crew before the pick starts.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For a new shift, the person who starts the jobsite can start a new session and share the new link or QR code with the crew. [^1]

### Do STOP signals buzz every phone in OperatorLink?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so an iPhone may show the alert only on its screen. [^1] Check the sound and screen settings on every phone in the crew before the pick, so nobody misses a signal.

### Can the rigger and operator talk by voice in OperatorLink?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a hand signal or a radio as a backup for the pick, in case a phone cannot connect.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
