---
{"title": "Relay depth and load readings to the crane operator on deck", "description": "How subsea installation engineers relay depth and load readings to the crane operator on deck, with what to have ready, the steps, tool choices and mistakes.", "url": "https://2dig.com/how-to-relay-depth-and-load-readings-to-the-crane-operator-on-deck-for-subsea-installation-engineers/", "date": "2026-11-08"}
---
How subsea installation engineers relay depth and load readings to the crane operator on deck, with what to have ready, the steps, tool choices and mistakes.

To relay depth and load readings to the crane operator on deck, the crew joins one jobsite session in a phone browser, with someone sharing a link or QR code. [^1] [^1] The figures go across as chat messages or spoken in a voice call, and HOLD and SLOW stay on until the last person leaves. [^1] [^1] [^1] The phone needs a working data signal, iPhone Safari does not buzz on alert, and an idle session is wiped after 3 hours. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser, so depth and load figures can go across as chat or voice [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

To relay depth and load readings to the crane operator on deck, each person on the link needs a phone with a working browser and a data signal, because the figures travel over the phone network. [^1] The person who starts the jobsite needs to share a link or QR code, and the rest of the crew joins from it. [^1] A jobsite link stops working 12 hours after the first person joins it, so a link kept from the previous shift may not open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours, so a stopped-shift session may need to be started fresh. [^1] Decide who reads the depth and load figures and who receives them on deck, because HOLD and SLOW stay on for everyone until the last person leaves the jobsite. [^1] The page can be added to the phone's home screen as a standalone app. [^1]

## Step by step

1. Check each phone has a working browser and a data signal for the whole shift, because the figures pass between phones in a browser. [^1]
2. Open the session in a phone browser; no app install is needed. [^1]
3. The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]
4. Confirm everyone who needs the figures is in the session before the lift begins, so the crew can use the available signals and communication tools. [^1]
5. Agree who calls depth and who calls load, and say the numbers the same way each time, so the crane operator on deck gets one version, not two.
6. Send each pair as a chat message with the depth and the load together, because button presses and chat pass between phones in the browser. [^1]
7. For a longer exchange, such as a change of lifting point, use the voice call: anyone who joins can take part in a voice call run from the phone browser. [^1]
8. Keep short replies to the one-tap calls such as Go Ahead, Copy That and All Clear, which are sent as chat messages. [^1]
9. Agree on which signals stay on: HOLD and SLOW stay on for everyone in the jobsite and are cleared only when the last person leaves. [^1]
10. When STOP is pressed, it releases every held direction on every phone and shows a full-screen alert to everyone else. [^1]
11. Pressing a move button keeps sending that move to the other phones, and if it stops arriving for 2 seconds, the other phones drop it, so keep the button held while the load is watched. [^1]
12. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app; the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Button presses, chat and voice pass between phones in a browser. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the call stays open for the whole shift, whether a spoken depth or load figure can be heard over deck and machine noise, and whether the phone locks its screen mid-lift.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that the channel stays clear through the lift.

Whichever option the crew uses, have the crane operator on deck read the depth and load pair back before the load moves. Match the option to the crew and the site, and check whether a fallback is available, since signals in a browser depend on the phone's data signal.

## Common mistakes to avoid

Relying on one phone for the readings: check whether another way to communicate is available if the phone's data signal drops. Reading a load aloud once and moving on: send the depth and load together as a chat message so the operator on deck has the pair in writing. [^1] Assuming every phone alerts the same way: on Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so confirm how the alert shows on each phone in the crew. [^1] Leaving a session empty: a jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] A move that stops arriving: if a move stops arriving for 2 seconds, the other phones drop it. [^1] Letting the phone screen sleep mid-lift: check the screen timeout settings on each phone before the lift.

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The signals and readings are shown through a phone browser, so the phone still needs a working data signal for the shift. Worth checking: whether the phone's data plan covers a full shift with the page open in the browser.

### What happens when the STOP button is pressed?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently: they stay on for everyone until the last person leaves the jobsite. [^1]

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier shift may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]

### Do STOP signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so on an iPhone the alert may only be seen on screen. Worth checking before the lift: how the alert shows on each phone in the crew.

### Can crew members talk over the phone during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser, and one-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] [^1] Worth checking: whether another way to talk is in place for when a phone's data signal drops.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
