---
{"title": "How to record communication faults for safety officers", "description": "How to record communication faults on a jobsite: what to prepare, the steps to follow, tool options to compare and common mistakes to avoid.", "url": "https://2dig.com/how-to-record-communication-faults-for-safety-compliance-officers/", "date": "2026-11-08"}
---
How to record communication faults on a jobsite: what to prepare, the steps to follow, tool options to compare and common mistakes to avoid.

A communication fault is best kept in a written log with the time, the signal, the people involved and what happened next. OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] The facts available here do not say whether a session keeps its own record, so check that before you rely on it.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before the shift starts, have a written log ready with a column for the time, the signal or message, who sent it, who received it, and what happened next. Writing each fault down at the moment it happens is more reliable than writing the day up at the end. Agree in advance who records faults, so the officer and the crew use the same words for the same signals.

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew. [^1] Check that every crew phone has a working browser for the whole shift, because button presses, chat and voice pass between phones in a browser. [^1] Decide who will start the jobsite session, since that person shares the link or QR code and the crew joins from it. [^1]

## Step by step

1. Set up the log before the shift, with fields for time, signal or message, sender, receiver, and outcome.
2. Confirm that every crew member knows the names of the signals and what each one asks them to do.
3. Before the lift starts, check that each phone or radio can reach the rest of the crew.
4. When a signal is given, write it down at once with the time.
5. When a signal is missed, delayed or unclear, note it as a communication fault with the time and the people involved.
6. Record only the causes you can see, such as a dropped connection, a missed call or a misheard word. Do not guess at causes you cannot confirm.
7. Keep a backup method ready for each signal, and note in the log whenever the backup is used.
8. At the end of the shift, review the log with the crew lead and mark each fault as closed or still open.

## Tools that can do it

OperatorLink shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in a browser. [^1] When STOP is pressed, it clears the directions every phone is holding and shows a full-screen alert to everyone else. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] The facts available here do not say whether those chat messages are kept, so check that before counting them as part of the record.

A phone video call app is a second option. No facts here describe one, so check whether the call can stay open for the whole shift, whether the signal person stays in view, and how a missed call would be written down.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice, that every member can be heard over machine noise, and that each transmission can be written down as it happens.

Match the option to the crew and the site, and keep a fallback ready in case a browser session cannot carry a signal.

## Common mistakes to avoid

Relying on one phone for STOP. Signals pass between phones in a browser. [^1] Keep a voice or hand signal ready as a backup.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. Check the sound and screen on every device before the lift. [^1]

Leaving a session empty and expecting it to hold signals the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

Reusing an old link. A jobsite link stops working 12 hours after the first person joins it. [^1]

Forgetting that HOLD and SLOW stay on for everyone until the last person leaves. [^1]

Treating a move as confirmed when it may have stopped. If a press-and-hold move stops arriving for 2 seconds, the other phones drop it. [^1]

Writing faults up at the end of the shift from memory. Record each one at the time, so the log shows the order of events.

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser and needs no app install. [^1] Button presses, chat and voice pass between phones in a browser, so check that each phone's browser works before the shift. [^1] The facts available here describe no card or payment fee.

### What does OperatorLink do when STOP is pressed?

STOP clears the directions every phone is holding and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently. They stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] Keep a voice or hand signal ready as a second way to stop a lift, and write each STOP in the log with its time.

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] The facts available here do not say how long a session stays open between shifts, so check that before relying on an old session, and note in the log when a new session began.

### Do STOP signals buzz on every phone with OperatorLink?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz, so on an iPhone the screen matters more. [^1] STOP shows a full-screen alert to everyone else. [^1] Check the sound and screen on every phone in the crew before the lift, so no one misses a signal.

### Can crew members talk by voice during a lift with OperatorLink?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Voice passes between phones in a browser, so keep a radio or hand signal as a fallback. [^1] The facts available here do not say whether voice calls or chat are saved, so check that before relying on them as part of the record.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
