---
{"title": "How apprentice riggers can practice STOP and SLOW signals", "description": "Practice sending STOP and SLOW signals as an apprentice rigger: what to have ready, the steps, tool choices and common mistakes to avoid.", "url": "https://2dig.com/how-to-practice-sending-stop-and-slow-for-apprentice-riggers/", "date": "2026-11-08"}
---
Practice sending STOP and SLOW signals as an apprentice rigger: what to have ready, the steps, tool choices and common mistakes to avoid.

Practice STOP and SLOW with a partner first, using hand signals in a drill area where no load is moving. Then try a shared phone browser such as OperatorLink. OperatorLink shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [^1] It is currently free to use, and no paid plan is built yet. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before you practice, agree with your supervisor on what each signal means on this site and who is allowed to give them. Each apprentice should know the standard hand signals for STOP, HOLD and SLOW and practice them in a drill area where no load is moving. If you also practice with a phone, the signals pass between phones in a phone browser, so each phone needs that browser open. [^1] One person starts the jobsite session and shares a link or QR code, and the partners join from it. [^1] Decide which partner holds the phone that shows HOLD and SLOW, since those two stay on for everyone until the last person leaves. [^1] An empty session is wiped after 3 idle hours, so start a fresh session for each practice. [^1] Add the app to each phone's home screen before the drill so it opens as a standalone app. [^1]

## Step by step

1. Agree with your supervisor on the drill area, and confirm that no load is in the air and no one is working under the path of a moving hook.
2. Pair up, with one apprentice giving signals and the other reading them back out loud.
3. Practice the hand signals first. Repeat STOP, HOLD and SLOW until both partners give and read each one without hesitation.
4. Switch roles so that each apprentice sends and receives every signal at least once.
5. If you practice with a phone, open the session on one phone and have the partner join from the shared link or QR code. [^1]
6. Send STOP first and confirm the partner's phone shows the full-screen alert. [^1]
7. Send HOLD and SLOW, then keep them on until the drill ends, because they stay on for everyone until the last person leaves. [^1]
8. Hold a move button and watch the partner's phone. The move keeps arriving while the button is held, and if it stops arriving for 2 seconds, the other phone drops it. [^1]
9. Repeat the drill until each signal is sent and read back correctly, then have everyone leave the session. An empty session is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Anyone who joins can also take part in a voice call run from the phone browser. [^1]

A phone video call app is a second option. Check whether it keeps the call open for the whole drill, whether the partner's hands stay in view, and whether the phone locks its screen during the drill.

A two-way radio is a third option. Check that both apprentices agree on the same words, that each can be heard over machine noise, and that the channel stays clear for the whole drill.

Match the option to the drill and keep hand signals as a fallback, because a phone signal can drop at any time.

## Common mistakes to avoid

Practicing only with a phone and skipping the hand signals. If the phone's signal drops, the partner sees nothing, so practice the hand signals first and keep them as the fallback.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on each phone. [^1]

Forgetting that HOLD and SLOW stay on until the last person leaves. [^1]

Not checking that a move still arrives while a button is held. A move that stops arriving for 2 seconds is dropped by the other phones. [^1]

Reusing an old link. A jobsite link stops working 12 hours after the first person joins it, so share a fresh link for each drill. [^1]

Letting a phone lock its screen during the drill, so that a signal is missed.

## Frequently asked questions

### Is OperatorLink free for apprentice riggers to practice with?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Nobody needs to install an app to join, because the page runs in a phone browser. [^1] Practice still depends on each phone having a working browser, so check that the browser opens before a drill. [^1]

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone in the jobsite and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, since they stay on for everyone until the last person leaves. [^1] Practice sending STOP first in every drill so that each partner learns how the alert looks on their phone.

### How long does an OperatorLink jobsite link stay active for practice?

A jobsite link stops working 12 hours after the first person joins it, so a link from an earlier drill may no longer open the session. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] For each new practice, start the session again and share the new link or QR code with your partner.

### Do STOP signals buzz on every phone in OperatorLink?

On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] On an iPhone, watch the screen rather than relying on a buzz. Before the drill, check the sound and screen settings on every phone so that nobody misses a signal. Keep practicing the hand signals too, so the phone is never the only way a signal reaches the partner.

### Can OperatorLink be used for voice practice between apprentices?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Because voice runs in the phone browser, each phone needs that browser working. [^1] Keep hand signals ready if the call drops during practice.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
