---
{"title": "How to plan communication for critical lifts for lift planners", "description": "Plan communication for critical lifts: what to have ready, the steps, tool options and common mistakes lift planners make.", "url": "https://2dig.com/how-to-plan-communication-for-critical-lifts-for-lift-planners/", "date": "2026-11-08"}
---
Plan communication for critical lifts: what to have ready, the steps, tool options and common mistakes lift planners make.

Plan the communication before the lift starts. Name who gives each signal, agree on what STOP means, choose the channels, test them with the whole crew, and keep a fallback ready. OperatorLink, a phone browser tool, shows the signals to the crew. [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a phone browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Lift planners need a written communication plan. The plan names the signal person, who gives directions to the crane operator, and a backup for that role. It also says who can call a stop and which crew members must act on each signal, so nobody has to guess who is in charge. Write down where each crew member stands during each move and what they can see from that spot. Check that every radio or phone works at the site, including at the spot where the signal person will stand. Agree on the signals before the lift. STOP, HOLD and SLOW are the signals this page uses as examples, and each one needs a single meaning that everyone repeats back. If phones carry the signals, the person who starts the session shares a link or QR code, and the crew joins from it. [^1] Finally, write a fallback for when a phone or radio drops out, so the lift can still be stopped.

## Step by step

The steps below work whichever channels the crew uses, so the plan does not depend on one tool.

1. Write the communication roles for the lift on one page, naming the signal person and a backup.
2. Agree on the stop signal, and make clear to everyone that it overrides every other signal.
3. Choose the channel for each signal, such as hand signals, a radio, phones, or a mix, and name the main channel.
4. Check each channel at the site, including the spot where the signal person stands and the spot where the operator sits.
5. Confirm that every crew member can see or hear each signal through the channel chosen for them.
6. Agree which signals stay on until someone clears them, so nobody assumes a hold has ended.
7. Plan for a lost signal by deciding what the crew does if a phone or radio drops out during a move.
8. Run a short test with the full crew before the lift, and repeat it for anyone who joins late.
9. Record the plan, brief the crew on the order of signals, and name who clears each one at the end.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1] It runs in a phone browser with no app install. [^1] Anyone who joins can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1]

A phone video call app is a second option. No facts for this page describe one, so check whether the call can stay open for the whole lift, whether the signal person stays in view of the operator, and whether the phone locks its screen during the lift.

A two-way radio is a third option. No facts for this page describe one, so check that the crew agrees on plain voice terms, that each member can be heard over machine noise, and that the channel stays clear during the lift.

Match the option to the site and the crew, and keep a fallback ready in case a phone loses its signal.

## Common mistakes to avoid

Relying on one phone for the stop signal. If that phone drops out, the crew needs another way to give the stop, so keep a hand or voice signal ready as well.

Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on every device. [^1]

Leaving a session open and expecting it to be there the next day. A jobsite with nobody in it is wiped after 3 idle hours. [^1]

Forgetting that HOLD and SLOW stay on until the last person leaves, so someone has to clear them on purpose. [^1]

Using an old link. A jobsite link stops working 12 hours after the first person joins it. [^1]

Assuming a move still goes through after the button is let go. Holding the button for a move keeps sending that move, and if it stops arriving for 2 seconds, the other phones drop it. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] It runs in a phone browser with no app install, so the crew does not download anything before the lift. [^1] Check whether the phone has a working data signal for the lift, and keep a radio or hand signal as a fallback.

### What happens when STOP is pressed in OperatorLink?

STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently: they stay on for everyone in the jobsite and are cleared when the last person leaves. [^1] On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the screen and sound on every phone before the lift. [^1]

### How long does an OperatorLink jobsite link last?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] Has the jobsite link been open for less than 12 hours since the first person joined? If not, start a new jobsite and share its link or QR code with the crew. [^1]

### Can OperatorLink carry voice calls during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Keep a radio or hand signal ready as a fallback in case a phone drops out during the lift, so the crew is never relying on a single channel to stop the lift.

### Can OperatorLink show a move while the button is held?

Button presses, chat and voice pass between phones in a browser. [^1] Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [^1] If the move stops arriving for 2 seconds, the other phones drop it. Use a hand or radio signal as a check when the view is unclear.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
