---
{"title": "How heavy haul crews pass signals to the cab", "description": "Heavy haul and transport crews: what to have ready to pass signals from the trailer to the cab, the steps, tool choices and common mistakes.", "url": "https://2dig.com/how-to-pass-signals-between-the-trailer-and-the-cab-for-heavy-haul-and-transport-crews/", "date": "2026-11-08"}
---
Heavy haul and transport crews: what to have ready to pass signals from the trailer to the cab, the steps, tool choices and common mistakes.

Passing signals from the trailer to the cab depends on everyone reading the same alert the same way, and one option is a shared jobsite session in a phone browser. [^1] Someone starts the session and shares a link or QR code, and the rest of the crew joins from it. [^1] STOP releases every held direction and shows a full-screen alert to the other phones, while HOLD and SLOW stay on until the last person leaves. [^1] [^1] Keep a backup ready, since iPhone Safari ignores the buzz and an idle session is wiped after 3 idle hours. [^1] [^1]

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

The starting point is a phone with a working browser and a data signal at each end, since button presses pass between phones in a browser. [^1] One person starts the jobsite session and shares its link or QR code, and the rest of the crew joins from that same link. [^1] A link stops working 12 hours after the first person joins, so a link kept from an earlier move may no longer open the session. [^1] An empty session is wiped after 3 idle hours, so a session left over from a previous move needs to be started again. [^1] Pick who watches the HOLD and SLOW signals, because those stay on for everyone until the last person leaves the jobsite. [^1] Add the page to the home screen of each phone so it opens as a standalone app. [^1] Agree on what each signal means before the load moves, so the driver and the trailer crew read every alert the same way.

## Step by step

1. Check that each phone has a working browser and a data signal for the whole move, since signals pass between phones in a browser. [^1]
2. Have the crew member who starts the session open it from a phone browser. No app install is needed. [^1]
3. That person shares the link or QR code with the trailer crew and the cab, and each phone joins from it. [^1]
4. Confirm every phone is in the session before the trailer starts to move, so each one shows the same signals. [^1]
5. Agree on which signals stay on. HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1]
6. Keep a move button held to keep that move arriving. If a move stops arriving for 2 seconds, the other phones drop it. [^1]
7. When STOP is pressed, every held direction is released on every phone and everyone else sees a full-screen alert, so the cab and the trailer pause before moving again. [^1]
8. Radio-style calls such as Go Ahead, Copy That and All Clear can be tapped once and sent as chat messages. [^1]
9. At the end of the move, everyone leaves the session, since a jobsite with nobody in it is wiped after 3 idle hours. [^1]

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nothing needs installing, because the page runs in a browser. [^1] Anyone who joins the session can take part in a voice call run from the phone browser. [^1]

A phone video call app is a second option. No facts here describe one, so check whether the call can stay open for the whole move, whether the cab can see the trailer, and whether the phone locks its screen mid-move.

A two-way radio is a third option. No facts here describe one, so check that the crew agrees on plain voice terms, that the cab driver can hear the trailer over engine and road noise, and that the channel stays clear through the move.

Match the option to the crew and the route, and keep a fallback ready in case a phone loses its data signal.

## Common mistakes to avoid

Depending on a single phone for STOP. If that phone loses its data signal, the rest of the crew may not receive the alert, so keep a horn or hand signal ready as a backup. Assuming every phone alerts the same way. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz, so check the sound and screen on each device. [^1] Reusing an old session the next day. A jobsite with nobody in it is wiped after 3 idle hours, so start a new session instead. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves, so someone has to clear them on purpose. [^1] Not confirming that a move still arrives. If a move stops arriving for 2 seconds, the other phones drop it. [^1] Letting a phone sleep mid-move. Adding the page to the home screen opens it as a standalone app, so check the screen settings before the move begins. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] The signals run through a phone browser, so each phone still needs a working data signal for the whole move. [^1] Check each phone's data plan before the move, since the phone's own signal is what carries the session.

### What happens when the STOP button is pressed?

STOP releases every held direction on every phone at the jobsite and shows a full-screen alert to everyone else. [^1] HOLD and SLOW work differently, because they stay on for everyone until the last person leaves the jobsite. [^1] Pause and look at the load before anyone moves again, and agree on that step before the move starts.

### How long does a jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours, so an old session may need to be replaced. [^1] For a new move, start a fresh session and share its link or QR code with the crew again. [^1]

### Do STOP signals buzz on every phone?

Not on every phone. On Android browsers, signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] STOP releases every held direction on every phone at the jobsite and shows a full-screen alert to everyone else. [^1]

### Can crew members talk during a move?

Anyone who joins the session can take part in a voice call run from the phone browser. [^1] Quick calls such as Go Ahead, Copy That and All Clear are tapped once and sent as chat messages. [^1] Keep a radio or hand signal ready as a backup in case a phone drops out during the move.

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
