---
{"title": "How to move heavy equipment inside plants: a rigger guide", "description": "This guide covers what to prepare, the steps in order, the tool options and the mistakes to avoid.", "url": "https://2dig.com/how-to-move-heavy-equipment-inside-plants-for-industrial-plant-riggers/", "date": "2026-11-08"}
---
This guide covers what to prepare, the steps in order, the tool options and the mistakes to avoid.

Moving heavy equipment inside a plant comes down to a written plan, a clear signal method everyone understands, and a fallback ready if a signal fails.

| Option | What it does | Fee | Card fee |
|---|---|---|---|
| OperatorLink | Shows STOP, HOLD and SLOW to the crew and passes button presses, chat and voice between phones in a browser [^1] | Currently free to use, no paid plan built yet [^1] | not published |
| Phone video call app | not published | not published | not published |
| Two-way radio | not published | not published | not published |

## What you need before you start

Before any heavy equipment moves inside a plant, the riggers need a written plan that covers the route, the weights, the rigging and the clearances, and every member of the crew should have read it. Walk the route with the crew and mark the floor where the load will travel, the spot where it will be set down, and any overhead obstacles. Name one signal person, and make sure the operator can see that person or the load at every point of the move. Agree on the signal method before the lift starts and make sure every rigger knows which one is in use. Button presses, chat and voice pass between phones in a browser. [^1] Keep a fallback ready in case a phone or radio fails partway through the move.

## Step by step

1. Walk the full route with the crew and note doorways, floor loads, overhead obstacles and where people will stand.
2. Confirm the weights and the rigging against the lift plan, and check that each sling and shackle matches it.
3. Name the signal person and make sure the operator can see that person or the load at every point.
4. Agree the signal method before the lift and test it with the whole crew.
5. Clear the route and mark a safe zone where no one stands under the load.
6. Decide who may call a stop and what everyone does when a stop is called.
7. Lift a short distance, pause, and confirm the load is balanced before moving on.
8. Move slowly along the route, with the signal person checking each step of the path.
9. Set the load down on the marked spot and confirm it is secure before anyone unhooks it.
10. Debrief with the crew and note anything that slowed the move for the next job.

## Tools that can do it

OperatorLink is made by the team that publishes this site. It shows STOP, HOLD and SLOW to the jobsite crew and passes button presses, chat and voice between phones in a phone browser. [^1] [^1] Nobody needs to install an app, because the page runs in a browser. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1] STOP releases every held direction on every phone and shows a full-screen alert to everyone else. [^1] HOLD and SLOW stay on for everyone in the jobsite until the last person leaves. [^1]

A phone video call app is a second option. Can the crew keep the call open for the whole shift, and can the signal person stay in view of the operator?

A two-way radio is a third option. Can every member be heard over machine noise, and does the crew agree on plain voice terms before the lift?

Match the option to the crew and the site, and keep a fallback ready.

## Common mistakes to avoid

Relying on one phone or one person for every signal leaves no fallback if that phone loses its data signal, so keep a voice or hand signal ready as well. Assuming every phone alerts the same way is another mistake: on Android browsers signals such as STOP make the phone buzz, while iPhone Safari ignores the buzz. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] Forgetting that HOLD and SLOW stay on for everyone until the last person leaves means the crew has to clear them on purpose. [^1] Holding a move button keeps sending that move to the other phones; if it stops arriving for 2 seconds, they drop it. [^1] The app can be added to a phone's home screen as a standalone app. [^1]

## Frequently asked questions

### Is OperatorLink free to use?

OperatorLink is currently free to use, and no paid plan is built yet. [^1] Button presses, chat and voice pass between phones in a browser. [^1]

### What happens when the STOP button is pressed in OperatorLink?

STOP releases every held direction on every phone in the session and shows a full-screen alert to everyone else. [^1] HOLD and SLOW behave differently, since they stay on for everyone until the last person leaves the jobsite. [^1]

### How long does an OperatorLink jobsite link stay active?

A jobsite link stops working 12 hours after the first person joins it. [^1] A jobsite with nobody in it is wiped after 3 idle hours. [^1] The person who starts a jobsite shares a link or QR code, and the crew joins from it. [^1]

### Do OperatorLink signals buzz on every phone?

On Android browsers, signals such as STOP make the phone buzz. [^1] iPhone Safari ignores the buzz. [^1] STOP is sent to everyone else as a full-screen alert. [^1]

### Can OperatorLink voice calls be used during a lift?

Anyone who joins the jobsite can take part in a voice call run from the phone browser. [^1] One-tap radio-style calls such as Go Ahead, Copy That and All Clear are sent as chat messages. [^1] Button presses, chat and voice pass between phones in a browser. [^1]

OperatorLink is currently free to use, and no paid plan is built yet. [^1] - [Visit OperatorLink](/go/start)

## Sources

[^1]: OperatorLink's own description of itself (the product of this site's publisher) (/go/start)
